My keyboard sounds are on/off/on without me changing anything in settings

After moving to i0S5 with my iPhone 4S, my keyboards sounds are intermittent. It's set to "ON" in settings... I've tried a re-boot.. Still intermittent keyboard sounds

I'm having the same exact problem! I bought mine on April 7th, 2011. I never dropped it or anything, but when it's in my pocket or my hand, the slightest touch makes it vibrate. What should I do?

Similar Messages

I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute.

I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

I'm having the same problem?

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

Gmail question. I'm getting an error message that states my username or password are incorrect. I haven't changed anything and the gmail is working fine on the mac book. The mail function worked yesterday on the iphone but not today - any solutions??

Gmail question. I'm getting an error message that states my username or password are incorrect. I haven't changed anything and the gmail is working fine on the mac book. The mail function worked yesterday on the iphone but not today - any solutions??

Try Restarting / rebooting your Mac before doing anything more drastic..
S.

Om Mac 10.8 firefox window keeps moving off screen without me touching anything so I cant accomplish anything.

I cant use firefox. It slides by itself of screen and I need to go to dock to bring it back. It happens every few minutes and sometimes even more frequently. While is off screen I am able to enter information into it. So it satays open but invisible

Are you accidentally hitting the F11 key? That will cause any open window to slide off the screen.

HT1386 without having changed anything, i can't now sun my iPad with my computer, as it says my computer is no more authorized....but it actually is even after checking this through "store" - "authorize this computer"....how to solve this?

when syncing my ipad 2 with my macbook air, the system says that this computer is not authorized, but it actually is, even after checking, so how to do now?

Reboot the computer and reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

My email icon quit working. It says my username and password are incorrect, and I had not changed anything.

My email has stopped working. It kept coming up incorrect username and password. I has not changed anything.

Delete your mail account and create a new one.
Sometime it's because the server is busy or down.

HT4085 Sounds are off

My ipad sounds are completely off.....

I should add that my alarm apps were not working until i reset the side switch either. I thought it was because they couldn't run in background but now realize it was the mute/lock switch button.

Organ and keyboard sounds missing

I have just installed ogic pro on my imac. Everything works fine, but most organ - and some keyboard sounds are not there, it seems they have not been installed.
Shall I install everything again?
Thanks for your help,
Stefan

I'm not a MIDI expert but I've seen this and I have a fix. Perhaps somebody else can explain why it does this and maybe even a better fix.
I experience this problem often (and mostly with organs) when I import MIDI files. The problem seems to be related to the MIDI channel for the notes. You need to change the MIDI channel of the notes before you can hear them.
I change the MIDI channels often enough that I have added a keyboard shortcut to do this. Here is what you do:
Go to the menu at the top of your screen and select "Logic Pro->Preferences->Key Commands..." A floating "Key Commands" window will appear. Open the "Arrange and Various Editors" section. About 3/4 of the way down, you will find two items called "Event Channel +1" and "Event Channel -1". These are the commands needed to change the MIDI channel on the notes. We will assign
these commands to certain keys so they are readily available. I set "Event Channel +1" to Command-Option-UpArrow. I set "Event Channel -1" to Command-Option-DownArrow. To set these, select one and click on the "Learn by Key Position" button. Then, press the key combination. It should be learned. After you set both key combinations, close the "Key Commands" window.
Now, you can fix your sounds. Go select one (or all) of the notes that you cannot hear and change its event channel (usually you have to go down). Use the "Event Channel -1" key combination (Command-Option-DownArrow). After you go down a few steps, you will start to hear the note(s).

Keyboard clicks and lock sounds are off even though the settings show them as "on". How can I get them back?

Keyboard clicks and lock sounds are off even though the settings show them as "on". How to get them back?

Use the volume buttons on the side of the phone. Personally, I find it's better with those off completely.

Is it possible to add reverb to vocal mic, without affecting my keyboard sound?

Hello,
I am trying to record my vocals and piano simultaneously. I'm using the MBox 2, with Adobe Audition 3.0. Whenever I add reverb to my vocal track (via the fx tab under my vocal track in multi track view), it affects the way my piano sounds while I am recording (it creates a delay on the sound of the keyboard while I am playing...almost like a 'bouncing note' delay). I really want to be able to hear some reverb on my voice while recording, but I cannot seem to figure out how to do it. This is how I have everything set up:
Piano is plugged in via DI on input 2 on the back of the mbox
vocal mic is plugged in via cannon on input 1 on back of mbox
If anybody could help, that would be wonderful. I've spent hours trying to figure this out with no luck. It is a lot more fun to record your singing with a bit of the pretty reverb....but my piano doesn't agree.
Thank you
Best,
Jenny Jo

Hello Brian,
Thanks for your help again. I have spent the last 6 hours running into nothing but problems. I tried your advice about recording mono in both separate tracks, and still no luck. I was using a condenser mic, and a keyboard. Both using mono, and I was using the studio reverb. I finally decided to try something simpler, just so I could at least feel a bit satisfied in getting a recording in. I set the condenser mic near my keyboard and speakers, and plugged my keyboard into the speakers. I armed the one mic track for record for phantom power, applied studio reverb, and set up the correct settings for the track by going into Audio Hardware Setup and selecting 'Asio Digidesign Driver' as the audio driver for everything. I simply wanted to play my piano, which would sound through the monitors next to me, and sing into the microphone..which would pick up my vocals with the piano in the background. The only way I could hear reverb on my voice during the recording, was by adjusting the 'mix' knob on the front of the mbox. It seemed to be working okay, and I thought I had found at least a compromise for the moment. But after saving the files, and upon listening to them...I noticed drops and rises/glitches/ in the recording volume. I then did a bunch of tests. I recorded some without any reverb assigned at all, did some recordings with the mix knob up and some with it off...I tried everything I could think of. I saved each one as a wav file, and MP3, just to see if that would affect the sound. Listening to them, they all have those same sound glitches. While doing the recordings, the sound disturbances weren't audible.
I am wondering if there is a setting that I need to fix...I am not the most savvy technical person, and am rather new to recording. Maybe the buffer size needs to be adjusted? I really have no idea...it is frustrating. I should say that I am using an MBox 2, which is supposed to be used with Pro Tools software. I had problems using Pro Tools as well, I don't think my OS is very compatible with it. Unfortunately, I have windows Vista, which I hear nothing but problems about in regards to recording. I prefer to use Adobe Audition, as I'm familiar with it, and like it.
Well, I hope this email hasn't put you to sleep. I really hope I can get this figured out, as I'm keen to record.
Thank you again..
Best,
Jenny Jo
Date: Tue, 2 Feb 2010 00:35:03 -0700
From: [email protected]
To: [email protected]
Subject: Is it possible to add reverb to vocal mic, without affecting my keyboard sound?
Out of some disbelief I had to try my own setup suggestion from above, since it's not a thing I do daily anymore. Without wanting to go into any dispute with the above poster, I can only say:
It works well here.
Your mileage may vary.
Setting up two mono tracks with a separate input to each, I was able to record vocals with reverb from Audition in my monitoring headphones, along with recording an electro-acoustic instrument (guitar in my case) on the adjacent track with no reverb at all. I sang/tested with lots of consonants and different monitor levels and reverbs; I used the Studio Reverb, which is the least CPU intensive and recommended in the manual. There was no noticable delay, echo, what have you, which I felt disturbed my precision at all. Now I KNOW technically there is a delay/latency, but for practical purposes it isn't noticable. I've also heard some singers are extremely pecky on this, and for them there is the solution of direct monitoring and an outboard reverb added to their headphone signal. For everyone else however it works well and the latency just a theory - certainly not an audible 'echo' of any kind. With a poor soundcard and a computer low on resources latency will become evident. Also if you don't use ASIO. This type of application is why we have ASIO.
>

Lock screen and keyboard sounds have quit working. The settings are correct and the device is not muted. What else can I do to get the sounds working again?

Four days ago the lock screen and keyboard sounds quit working, but was able to reset the settings. Two days ago I had to do this and turn off the device and then restart it to get the sounds back. Today they suddenly went out and I can't get them working again. The settings are correct and the device is not muted. My OS is up to date. What else can I do to get the sound back?

Hi there,
I would recommend taking a look at some of the troubleshooting stepd found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
-Griff W.

Switching off of keyboard sound while dialing

How can I switch off the keyboard sound while dialing a number? The keyboard sound itself is switched off so no sound will be played while typing an e-mail or text message.
I am using BB Z10 running OS 10.0.10.90, German language.

Volume buttons will turn off the dialing tones ( as well as the ringer). Also setting the phone to silent or vibrate only profile. Only workarounds I know of for this.

Select an area of sound track and delete it without using the razor?

Is there a way to select an area of sound track and delete it without using the razor please?
Like drag and then cmd-delete or clear or something would seem intuitive?
Thanks Steve z denver

Set In and Out Points to define the region, then use the Lift command (Sequence>Lift). Note that the Lift command functions based on track targetting, so if the Video track is also targetted, the content will be removed there, too.

My keyboard sounds are on/off/on without me changing anything in settings

Similar Messages

Maybe you are looking for