My keypad is not working during cal

Guys. On my xperia z2 when i am in a cal.. My keypad is not working.. When i disconnect it gets working. Y is that??/can i get a solution for this?

Settings, apps, all, look for a smartkey, uninstall it
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Number 2 key on numeric keypad does not work. All other keys work properly.

The number 2 on the numeric keypad does not work. Is there some way to clean it? If not how do I go about ordering another keyboard?

inside the remote there is a micro switch for each direction each can break
so yeah you could be the first who write about the right arrow key microswitch being broke in your atv

My iphone 3g keypad is not working. Letter "R" and numbers 7,8,9 not working.

my iphone 3g keypad is not working. Letter "R" and numbers 7,8,9 not working. Can someone help me, please?
Idia

basics from the User Guide are restart, reset, restore from backup, restore as new. Have these been attempted?
If you've tried ALL these steps, including setting up as a new device (not from backup), and you still have problems, then you have a hardware failure and will need to bring your phone into Apple for replacement.

7 key of alphanumeric keypad is not working on Nok...

Hi Forum;
I am facing this issue today. The '7' key of alphanumeric keypad is not working properly. On my Nokia 5800 Xpress Music. I am anuable to write character q and r. When ever I press it, it either prints p or 7. But it does not print q and r.
I soft reset my phone. But the problem resumes. Its annoying. As I cant type.
People, please suggest some solution for it.
I will be thankful to you.
Solved!
Go to Solution.

Yes, It is very annoying. In writing sms when I presse key 8 for t,u or v. 7 automatically pressed and it got the glow effect too. As if I pressed it too. Its really annoying. I like my phone but its driving me crazy. its out of warrenty. I have upgraded its firmware to v51 too. If it improve. But it doesnt.
And I think I should remove the protector screen. As I am having it since I bought this phone. I really should see if I can fix its issue from Nokia or sale it.
jheel_online I did changed its orientation. The spot has issue. When in landscape mode when i press p the dot (.) also pressed.

Microphone not working during call

microphone not working during phone call. both microphone and headphone mic not working during normal phone call. microphone works during facetime call. any suggestions?

Hi there naxster,
You may find the troubleshooting steps in the article below helpful.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
-Griff W.

HT4623 Hi, After updating my phone to the iOS 7, it looks like its keypad is not working properly like It gets a little hanged. What would I do solve this?

Hi, After updating my phone to the iOS 7, it looks like its keypad is not working properly like It gets a little hanged. What would I do solve this?

Thanks
it really works.

IPhone 4 Mic & Speaker not Working during Call

Hello All,
I have iphone 4 and it was locked on at&t and was running ios 5.0.1, now i have unlocked my iphone and now i am using ios 5.1.1. But i have a problem, when i call someone i cant hear anything "no dial tone sound and no sound during call" & speaker mode is also not working and nor the person cant hear my voice. I also tested on my another phone but same problem.....
So can you tell me is this a hardware problem or software problem ?? and yeah i can record voice memos and i can listen my memos with speaker on and off
Waiting for reply....

Do the basic troubleshooting steps described in the User Guide:
1. Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
2. Restore in iTunes using a backup
3. Restore in iTunes as new, without using a backup.
If restoring as new doesn't help, there is a hardware failure.

Validation not working during Mass Change of Vendor Line Items

Hi All,
I created validation for Reference Key 1 field of Vendor line items, in this validation i used customized user exit.
Whenever i select multiple line items in FBL1N for mass change & try to put a unauthenticated value system gives error as per Validation only for 1 st item but it not work for subsequent items & put the unauthenticated value in subsequent line items.
I am not able to understand why Validation is working only for 1st line item during mass change & not for subsequent line items.
Please provide your suggestions in resolving this issue.
Thanks
sandeep

Hello Sandeep,
I understand your issue. First check if the changes as per the SAP Note 640908 (https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640908) is available in your system.
Actually, Mass changes call FB02 in background and at this stage Validation gets activated and hence, the control doesn't go back for the next item changes. You can test this by deactivating the Validation and then the mass changes will me fine.
I hope this explains the behaviour.
Thanks and regards,
Suresh Jayanthi.

Help. My Keypad is not working.

My key pad is not working. To get into my phone i need to use a password but my keypad is broke. When I type in a letter sometimes it mixes up the letters or puts the letter in twice so I cant get on my phone. Ive done the standard turn the phone off, take the battery out, but nothing What can I do?

Hi nitin98
Have you tried reloading your software? I would suggest performing a backup of your BlackBerry smartphone then reloading the software as shown in the article below:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Slide Hyperlinks not working during a Build In?

Hi all,
I'm working on a Keynote presenation set up as a mulitple choice quiz. Below is the idea for how each question is set up.
Question Slide
Incorrect answers links to 'Next Slide' - Ex. Slide 7 ('Incorrect' Slide)
Correct answer links to 'Applicable Slide #' - Ex. Slide 8 ('Correct' Slide)
'Incorrect' Slide
Everything on the slide links to 'Previous Slide' to take the user back to the question to try again.
^ This is where I'm having an issue that I'm not sure is solvable.
I've got the 'Flame' Build In on the word 'Incorrect', which seems to negate the links put on that slide if the user taps/clicks while the Build In is in effect.
For example:
It runs correctly when -
On the Question Slide I click the incorrect answer - Keynote jumps to 'Incorrect' Slide
On the 'Incorrect' Slide I click AFTER the Flames Build In on the word Incorrect is complete - Keynote jumps to the linked Previous Slide (Question Slide). User can now attempt the quetion again.
It runs incorrectly when -
On the Question Slide I click the incorrect answer - Keynote jumps to 'Incorrect' Slide
On the 'Incorrect' Slide I click WHILE the Flames Build In on the word Incorrect is happening - Keynote jumps FORWARD to the 'Correct' Slide (NOT linking to the linked Previous Slide).
User is forced to move forward to next question.
So essentially the following happens: Pick incorrect answer> 'Incorrect' Slide appears w/ Flames Build In> Quickly click during flames Build In> 'Correct' Slide appears
Anyone know if this is just due to the Build In occurring and the slide not registering as having a link to Previous until it's completed? Or something along those lines?

Links do not work when a transition, action or build effect is in progress, there is no work around.

Iphone 4s, keypad sound not working, volume buttom doesnt show up or down

Hello,
I have bought my iphone 4s, 32gb 2 days back and i found out that the keypad sound does not work. i have gone to the setting, sound and turned on the sound of lock and keypad. However, its not working. also, the colume buttom when i click it up or down it doesnt show the bar, actually its doesnt work it shows only the symbol of sound.
i tried to reset, restore... no results
anyone can help me with that??
Thanks

I spoke with Apple and they suggested doing a restore. I did this and the sound was restored. I started installing my tweaks and programs, each time testing the sound. When I installed "Hands-Free Control" the sound issue came back. This is a tweak to allow you to control Siri without having to hold the home button. When you activate the listening option, the sound on the phone stopped working. When you turn it off, it started working again. I dont know if the rest of you are have this Cydia tweak, but that was the culprit for me.

Serial number for CS4 Design Standard ist not working during installation

Hello could you please help me? In the chat-support they gave me the information to this forum.

Thank you for your reply - it's a full version and the serial number is checked by the Adobe Support - it's fine. But the serial number ist no accepted during the installation.
This instruction is also not working because of the incorrect serial number:
http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

Microphone not working during the phone calls

Hi dear colleagues,
I've been using my STL100-2 for 3 weeks and suddenly my microphone stopped working during the phone calls.
It is 100% not a hardware problem because voice input works fine.
The microphone works correctly when I turn the speaker on. And when I use the headset as well.
What is wrong there? I tried hard reset, flashed my BB to the latest 10.2 and it didn't solve my problem: the other side could not hear me.b
Please, help me as I cannot do a very simple thing - make calls on my phone without those freaky tricks.
Thank you!

I have a similar problem, I found that it worked ok after I made a Skype call to the phone or if I called the phone from my playbook using video chat it would seem to start working, then it got worse and I found if I squeezed near the mick it would work ok. I also saw another thread where they had similar problems and solutions were possibly linked to loose screws on the plastic casing around the area of the mic as the author suggests it could be an assembly issue. I plan to check mine when I get to work tomorrow as I have no screw drivers small enough on my person right now. Anyway try it you never know it may give you a clue to the problem.
cheers.....

LR 2.6 Numeric Keypad + Does not work

Windows XP sp3 -- I have searched and noted others have this problem, but have not been able to find a solution or workaround.
How can I get my numeric keypad + sign to work with LR (as it does with CSR 4)?
Thanks
Mike

Thank you sooo much for this answer. I use an iMac G5, but still, had apparently done the same thing. It was so nice to find this solution and be able to fix it.

LENOVO G560, BEEP SOUND ON STARTUP & SOME NUMERIC KEYPAD BUTTONS NOT WORKING

My g560 sounds continous beeps while starts ups, some numeric keys on right side not working like 2, 4, enter key, etc.
some times the number 2 keys works automatically any time while working on WORD file or on run command.
whts the problem,, plz advice.

Hi abgautam00.
Welcome to Lenovo Community Forums!
If your system still boots to windows ok,
I think it's a stuck key that's causing the beep
Try Installing this Software test
http://www.passmark.com/products/keytest.htm
Run this app within Windows and without pressing any keys see if there is a stuck key as it will light up on this tool
Let me know your findings
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My keypad is not working during cal

Similar Messages

Maybe you are looking for