My KingMax SuperRam can't run Dual Channel for K7N2-delta
My KingMax SuperRam can't run Dual Channel for K7N2-delta
why??
How many sticks do you have?
Please post complete systems specs in your signature.
Similar Messages
-
Is it possible to run 3 DIMMs with Dual Channel on K7N2-Delta-L?
I was wondering whether it is possible to run Dual Channel with all 3 slots.
I noticed the manual said Dual Channel is only enabled when running 1/3, or 2/3.
However, friends with Asus and Abit boards of similar design (nForce 2 400 with 3 DIMM slots) told me they can run Dual Channel with DIMMs in all three slots.
Has anyone tried something like this with the K7N2 Delta-L?Quote
Power: CompUSA 500W Specs
+3.3V = 15A
+5V = 42A
+12V = 19A
-5V = 0.6A
-12V = 0.6A
+5Vsb= 2A
Total 500W
the 3.3v rail is terrible.
i have 20 amps on the 3.3v rail and i have a generic 300w psu.
time to buy a new one and make that a antec enermax or any other good psu.
drop a post here if you want any advise on which psu you should buy
3.3v 25a
5v 35a
12v 16a
something like this is minimum of what you should have.
500w does not mean anything when looking at a psu.
an enermax 350w has almost twice the power output as a q-tec 550w. -
Hey i am using a K8T NEO MS-6702 v1.X and i was wondering if i can use DDR dual channel ram. anyone know ? plz leave msg here or preferably email me at [email protected] , Looking at buying this Kingston ValueRAM Dual Channel Kit 184 Pin 1G(512MBx2) DDR PC-3200 - Retail.
You can run Double-Sided memory on the K8T800, but not in Dual-Channel Mode. The mobo does not support it. Jocko may be able to tell you if the K8T800 PRO version supports that.
-
Can i run dual monitors on mac book air
Can I run dual peripheral monitors on mac book air, perhaps through Thunderbolt? I am converting from a desktop to making the Air Book my main computer but need to run two displays.
Welcome to the Support Communities. This Apple doc may help:
http://support.apple.com/kb/HT5219#dispnum
...Found by searching here:
http://support.apple.com/kb/index?page=search
And in OS X Mavericks, arriving this fall, there are some enhancements for multiple displays:
http://www.apple.com/osx/preview/#multiple-displays -
Can 2011 MBA install APP in APP Store? Can it run App PPS for online video watching?
Can 2011 MBA install APP in APP Store? Can it run App PPS for online video watching?
Look at this link:
Install WhatsApp On iPad And iPod touch
http://tinyurl.com/lp6tsud
Cheers, Tom -
can i run microsoft office for mac 2008 or 2011 on my imac g5?
i have the os x leopard version 10.5.1 cd ...i dont know if i want to install it
what should i do?You can run Office 2008 but not 2011.
(62245) -
I can't run iPod utility for Windows in my Windows 8 . does this apps support windows 8 ?
Welcome to Apple Support Communities
iPod Utility for Windows hasn't been updated for a long time, so it's probably not supported in Windows 8. Have you tried to run it in compatibility mode? -
Can't get Dual Channel mode to work
Hello,
I have a pair of 512MB DDR400 ram sticks (listed in my sig).
The Memory Slots are arranged like this:
1 2 3
[cpu] | | |
I put each stick in slot 1 and 2 and no workie, still Single Channel Mode.
I put a stick in slot#2 and #3, no workie.
I put a stick in slot#1 and slot#3, no workie.
Is there something else that I'm missing or did I just buy the wrong memory for dual channel operation? It was not a matched set, but it is the same no-name brand of memory I bought from newegg.com. They both have the same 3225804T-5 marking on them...
They are supposed to be 2.5CS and that is what my bios is set to. I don't have any special settings in the bios that I know of..
Let me know if you have any ideas or if I need to post more information.
Thank You!K7N2-V
Not sure about this but is that motherboard based on the Nvidia nForce2 400 chipset?
What does the manual specs say?
If it is then it doesnt have 2 memory controllers and can only do single channel.
Edit: http://www.pcper.com/specs.php?p=MB&id=38
That your mobo? -
K8t Neo2 won't run dual channel with Opteron 165
Hi,
I have a K8t Neo 2, and was running a Newcastle 3500+ on it, with 2x1GB PC3200 memory sticks (Buffalo memory) in dual channel mode (ie DIMM 1 and DIMM 3 populated) without any problems. I replaced the 3500+ with a new Opteron 165, and the system would not post. One of the red lights on the D-bracket was red, the rest were out.
To troubleshoot, I removed one of the memory sticks, and the system booted fine. I then put the 2nd memory stick in a non-dual channel setup (DIMM 1 and DIMM 2 populated), and it booted fine. If I try booting the system with the RAM in any dual channel enabled configuration, it will not post. I verified that it isn't a RAM issue, because I have 2 sticks of 512 MB ShikaXRam, which has always worked fine, and I got the same behavior as I got with the Buffalo RAM. I have tried changing the RAM clocking in the BIOS, and that also doesn't help, because it seems it reads the speed automatically no matter what you set the DRAM clocking page to.
Does anyone have any suggestions? Is this board not Opteron 165 compatible with dual channel memory?Alright, I tried all of the steps mentioned, setting optimized defaults, even tried changing all memory timings to the most conservative available. The only way the system will boot with 2 DIMMs installed is if they are in the two slots furthest from the CPU. It will also post with 3 DIMMs installed in any configuration.
I also have a generic 500 w PSU that is rated 32a on the 12v rail that I tried quickly plugging in (just plugged the 2 PSU connectors to the motherboard without hooking any of the IDE devices to it) It still exhibits the same behaviour. With no hard drives, optical drives, etc plugged in, wouldn't that pretty much eliminate the PSU as an issue?
I don't want to just spend $100 on a new PSU if it's highly unlikely to be the issue. Does this sound like something I'd need to replace the motherboard to fix? Is the performance difference between dual channel and single channel enough to even warrant buying a new board? The reason I want to avoid replacing the board right now is because I still have an AGP card, and don't want to replace it right now as well as the board, and getting another AGP based board seems to be stupid. Also, AGP boards are really hard to find now, and most of them available locally run on the ULi chipset -
When I boot up it says 64 bit single channel, this is confirmed by CPU-Z.
I bought 2 PQI 3200 512 DAH Dual channel memory sticks (Identical) bought in a single package ($159.00) when I got this Mobo and machine , originally Fry's installed them in slot 1 and 2,javascript:void(0);
noidea
I've moved them to slot 2 and 3 which accordinhg to the hand book and what I've seen in forums should enable the dual channel mode. Still single channel. I've set the bios to force dual mode and still I'm in single mode. I don't know if this is related but anytime I've ever tried to use top perfromance or best performance settings in BIOs it won't reboot and I have to clear the CMOS so no overclocking for me...... I have the latest Bios version 2.0, just updated that from 1.90 todayand all the latest VIA drivers etc.
Name : Physical Memory
Memory Capacity : 512MB
Memory BankLabel : RAS 2 & 3
Memory DeviceLocator : DIMM2
Memory Type : 3DRAM
Name : Physical Memory
Memory Capacity : 512MB
Memory BankLabel : RAS 4 & 5
Memory DeviceLocator : DIMM3
Memory Type : 3DRAM
I wondered why Sandra said my memory was choking my processor. Its 800 FSB and HT is enabled. In addition, I have frequent BSOD issues, IRQ less or not equal, pagefile in non paged area, I just want to play some battlefield without getting kicked to desk top or boot.....
Other question, sitting here typing this and my CPU temp is 46 C.
Any help would be appreciated, I'm not sure what I've missed and I'm a noob at this stuff, would increasing the voltaqe help????The online manual for the PT880 NEO-FSR says slots 1 and 3 are used for dual channel.
I don't know about the Via chipsets, but the Intel chipsets need the DDR voltage set to at least 2.65 for stable operation. -
How can I run the report for different input values at the same time?
Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh -
Can I run Quickbooks Contractor for Windows on my Macbook Pro with Bootcamp ?
Can I easily run Quickbooks Contractor for Windows in my Macbook Pro and exchange QB data files with my accountant ?
You can run any Windows program once you install Windows on your computer using either Boot Camp assistant or a VM like Fusion, Parallels, or VirtualBox.
-
Can SAP run the depreciation for closed Period and posting to diff month?
My client forgot to run the depreciation for Jan 2011, and now the Jan period has been closed and report also done.
My solution was to re-open the Jan and does the depreciation, once completed reclassify Jan depreciation posting to Feb 2011 manually.
I am just wandering whether SAP can handle this different way.
Can SAP performs Jan (Closed Period) depreciation and post to Feb period automatically or any other suggestions?
CheersHi
Yes, you can do that
Follow this thread... Unable to post depreciation- Error AA730
Using ABF1, you can do it
Br, Ajay M -
How can we run MDBT transaction for non-valuated items only
HI,
We want to run the MDBT transaction for non-valuated items only...but through this transaction we can run for all items..
How can we run only for non-valuated items???
Regards,Dear Anil,
MD02 - Material level planning ( Multilevel )
MD01 - Plant level planning ( Multilevel )
MDBT - Back ground MRP ( Multilevel )
coming to ur query if all 20 materials belongs to one storage location or one MRP controller
Then you perform MRP for that 20 materials with the above given user exit
Also Plz refer my reply from this thread
[Re: MD01 Replanification.]
Regards
Madhu -
OS 10.3.9 - Can't run printer utility for Epson 1520
My ink jets are clogged, but I can't run the printer utility. It's grayed out in the print monitor and I can't click on it. I had the same problem a few months ago and downloaded a driver someone recommended. It worked, but it was a trial version and started printing logos on everything after 30 days. So I uninstalled it. Ideally, I need a free printer driver. Or if not, another trial version will get me by for now.
ThanksHave you tried downloading and installing the latest Epson driver? The Epson driver should include a printer utility.
Here's a link: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=Overview&oid=14435
Maybe you are looking for
-
Printing custom sizes on HP Officejet Pro 8600 Plus from Macbook Pro
I am having trouble setting up a Word Document (Word for Mac 2011) to print in a custom size on my HP Officejet Pro 8600 Plus. I'm using a Macbook Pro running Yosemite. I would like to print on a card stock that is 4.5 in x 13.5 in. I have tried
-
Use of APIs to update Absence info in Oracle HR/SSHR 11i
Dear all, Use of APIs and Absences 1. Can you please let me know which are the relevant APIs to update Absences Information into Oracle Human Resources Application? 2. Where can I find relevant documentation on how to deploy these APIs? Thanking you
-
I cannot get iTunes to automatically launch at startup in Windows 7. I need it to do this so my Apple TV 'finds' my Music Library, which is stored on an external hard-drive, connected to my Windows 7 PC. Anyone know how I do this? I cannot seem to fi
-
Hi all my client wants that the system should automatically reverse the previously calculated WIP after final confirmation of order.Is it possible? if yes what is procedure?(with out useing KKAX &KO88) urgent pl Regards Sankaram
-
Parameters not displaying all values
Hi, I have a parameter on a Discoverer report for selecting where the absence category is in a list of values. However, the list of values that you are able to select from is not complete, it's only a partial list. But if you type the values in manua