My Labels Print without spaces ?

I am printing avery labels that were produced by the "label assistant.
All good... except when I print the label items print without spaces.
Like This:
JamesHammil
123MainStreet
AlbuquerqueNM87111
Any Ideas how to fix this?

Duuuu I figured it out.
Sorry

Similar Messages

Zebra label - text without space.

Used BAR-ONE for SAP. Create an ITF file, that was uploaded into a SapScript layout. With the output of the lable the text areas even free text contains no spaces between the different words example "Please Help" get printed as "PleaseHelp".

Hi,
Check the following link:
http://www.sap-img.com/sapscripts/sample-sapscripts-label-printing-program.htm
you will get one sample program of sample label pring program.
hope it help you.
Regards,
Bhaskar

How can I print a selection in Firefox 11 without it wasting paper and printing blank space in place of the non-selected material?

In Firefox 10 and before, I could select a small portion of a web page and it would print the selected portion on a single page. In Firefox 11, it prints blank space for the portion above my selection before printing my selection. This blank space could span several pages, and my printer prints those several blank pages with only headers and footers.

Still happens with Firefox 12. I wish they'd just fix it, the way it used to be in Firefox 10, without the complicated workaround suggested above.

Problem in continuous Material Label Printing

Hi Experts,
          I am using SAP Script for Material Label Printing and Dot-matirx printer for printing.
          There are 6 labels getting printed on a Page. There is no problem in printing but what happens,
          whenever there is a new material getting printed, it skips the current page and resumes the
          printing from new page.
          Example. there are 8 labels for a Material-1 and 3 labels for Material-2. 6 labels for
          Material-1 would print on 1st Page, the rest 2 would print on 2nd page. Now the 3 remaining
          labels for Material-2 are getting printed on 3rd page which should get printed on 2nd Page itself
          as there is space for 4 more labels on 2nd page.
          Please help me out on this.
Regards,
Ravi.

Hi ,
every material there will be started an new sapscript (probably)
You will have to change your program that way that all materials and belonging data comes into 1 internal tab.
If you print this tab in 1 big loop (instead of a nested loop for everymaterial) everything will go fine.
Sucees, Gr., Frank

Custom Label Printing - Print position creeps up and across labels

Hello
I am using VS 2010 and have updated to SP4 for Crystal Reports
I used the custom size option to make a label report. The built in options for label sheets do not match the labels that I have
I made a label report for 3 columns and 8 rows using the label size, margin widths top and bottom, left and right, with the 2 widths between the columns. But this does not print correctly on the labels. The printing on the label rows creep up so by the time you reach the 8th row the label is partly on the 7th Row. The left hand column prints correctly. the middle column prints closer to the left edge of the label than in the first column and the third column is printing on the gap between the 2nd and 3rd column.
I tried making a new report and set the dimensions to the maximum sizes that would allow 24 labels (3 columns and 8 rows) but the same problem occurs as when having set the correct sizes
I am not sure if there is a method to edit the label sizes, and margin widths as happens when creating a new report or if the only option is to create a new report.
Any assistance or information on how to make the labels print with the correct row and column spacing would be appreciated.
My Labels are 67mm x 36mm. there is no space betwwen the rows, the margin at the top and bottom of the sheet are the same, and the left and right margins are the same. The space between the columns is 2mm

Thank you for the reply Rob
There is no Avery template in the list that has 24 labels, which is why I was using the Custom Label
I have tried many variations trying different widths and gaps between the labels, but in all cases by the time the 8th row is printeed the printing has crept up and is now overlapping onto the bottom of the 7th row label. The third column is printing on the gutter between the 2nd and 3rd column.
When creating a Custom label it would appear that the Wizard works on Letter size Paper regardless of the paper size that the printer is set to. All my printers are set to A4 size paper.
Letter Paper is 215.9mm x 279.4mm compared to 210mm x 297mm for A4. While the width is not a problem the length is less, and that may well be what is causing the problem when the Wizard creates the labels, despite changing the Paper size to A4. But the paper size can only be changed and set to A4 after the wizard has been given the label size and spacing for margins and gutters.
In my view the Wizard should ask for the paper size and then ask for the label size settings and layout
Regards
David

Problem while printing back space...

here is my code:import java.io.*;
public class Stars4 {
     public static void main (String []args)throws IOException{
     final int target=10;
     int space, star=1;
     for(space=0; space<9; space++){
          System.out.print("\b");
     }//end of method main
}//end of class Stars4output is:
Press any key to continue...
prints no backspaces at the beginning..
any suggestions appreciated.

aaaaa....pardonnsss...i am the victim of my english..i thought that backspace and space are the same things and thought that to print some space without other characters, the only way is to use escape sequence for backspace. when i use (" ") it is ok. thanks vdheiden. friend danielyeap, i used variable target and class name stars because i am planning to add more code and change the program. again pardon..

Label printing problem from Business Object Infoview

Hi,
I got a problem with printing label (roll) from Zebera Label Printer. The label is designed in CR XI which works properly printing from Crystal Report XI and Zebera printer prints labels (more then one labels) without any trouble.
But the same label (report) does not get printed with all its pages (labels) from the same Zebera Label Printer using BO infoview. It prints only one page (1st label) and stops.
It seems that BO infoview takes all the labels converted in pdf as one page. Where I want that each label should be considered as single page.
Any idea?

Thanks Don
Yes the same report is published in the BOE.
From infoview, It prints on the screen eight (8) labels in two column on one A4 size page. While I want to have each label (W=3.9in x H 2.1in) as one page printed. So that, each label can be printed as one page on label printer.
I want to print as pdf format then printing on Label Printer.
Thanks
GJ
Edited by: GuroJee on Apr 28, 2010 1:36 AM

Contacts and Brother QL-580N Label Printer

Hi,
I'm trying to get Contacts app in Mountain Lion (previously known as Address Book) to print natively to a Brother QL-580N printer. By 'natively' I mean without having to install Brother's GUI application.
At the time that I added the printer in System Preferences > Print & Scan, Mountain Lion reached out and downloaded QL-580n CUPS drivers nicely.
I can select QL-580N as the printer, with CUPS driver, and send it print jobs.
What I can't do is figure out how to format it for 1.1" X 3.5" labels (Brother address labels DK-1201) in Contacts app.
In Print Dialog box > Contacts > Size I can choose 1.1" by 3.5" but it prints portrait instead of landscape, printing only part of the address across the middle of the label.
If there was a landscape option it would be easy... am I missing something?
Thanks,
b.

Ok... I got there, kinda.
I found that the 'envelopes' style has a landscape/portrait option.
With some help from this post: Re: Address Book label printing
I was able to prit a label directly from Contacts.
Be very careful of the Basic > Length setting. It defaults to 11 inches. This will waste a LOT of tape if you don't remember to set it to something appropriate. Unfortunately you need to do this each time; saving as a preset does not save this option
b.

Label Printing with ZPLII

Hello All,
We are trying to print labels with Zebra printers using ZPL II programming.
The prints are ok for english characters but it does not print the characters belonging to European characters.
We changed the device type to support special characters. But we are not sure if the new device type will support that.
Please suggest your thoughts on this.
thanks
Seema

Hi Seema,
if you use sapscript, I guess you use the method described in SAP Note 179534 where you create the label in the third party BAR-ONE program and upload it to the sapscript form in the SAP system. In this case, device type like LB_ZEB is used which just passes the print data with the embedded ZPL-II commands to the printer without changing anything.
I'm not sure which languaegs you are trying to print. Usually, it is necessary to copy the device type e.g. ZLB_ZEB and change the character set of the device type to a character set, which supports the required language. The current character se for device type LB_ZEB is 1162.
Regards,
Aidan

Opening .cld files (CD-Label Print - a Canon cd labeling software) on iMac

After transferring my PC files to my shiny new iMac, I am having trouble opening my DVD/CD labels which were created by Canon's labeling software CD-Label Print on my old PC. It appears that the file extensions .cld are unrecognisable to iMac, does anyone have a quick fix that will allow me to open those files as I have around 300 of them? Your help would be very appreciated.

I think you would have a better chance of resolving the issue by contacting Canon's tech support. Although you may find others here with a similar problem that won't solve the problem. Unless you can find a Mac compatible program that can read those files you're pretty much dependent on Canon producing a Mac version of their software or running Windows on your Mac. For the latter there are these options;
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Most Mac freeware, shareware, and some commercial software may be found at VersionTracker or MacUpdate. There are quite a few labeling programs available although I have no idea if they can read the Canon files you have.

Intermec PX4I Label Printing Problem

Hi,
We are facing issue while printing Bar Code Labels on Intermec PX4I label printer. While printing few labels could not print. When I tried to process the failed spool requests with the same settings again, the printer printed labels without any problem. After that the user was able to print the labels normally bust faces the smilar issue randomly. The user has to restart the printer to start the printer. We are facing similar issues on the other lable intermac lable printer as well.
When i checked the error log, I could see the below error:
SAP spool error log
      =====================
Print request processing log
Character converter active when first problem occurred
Data was saved with character set 4102
Data will be converted to character set 1117 (synt = 1117)
Errors occurred processing this print request
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
Most important attributes of spool request
Request number 56457
Request name LVS1   AKN
Client 100
Owner AKN
Request attributes
Time created   2010072522521300
Remaining life +00007215825
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     D
Dispo 3 (Indirect/Direct) D
Default output device AUTZ
Default no. copies 1
Format DINA3
Main print request characteristics
Spool request number 56457
Print request number 2
Print request attributes
Time created   2010072600534800
Output device AUTZ
Format DINA3
Character converter active when first problem occurred
No information available
Any suggestions to solve this problem?

Hello Abhijeet
As you rightly pointed out, inspite of the above error label printing is not impacted.
The problem is that print control SC400 is not maintained in transaction SPAD.
Please refer to OSS note 17559 for more information.
Regards
Chokkalingam Pillai

Mail label printing from Address Book

I am trying to print labels for Christmas cards using the label printing feature in Address Book (Tiger version). The cards in my group include First and Last Names as well as the Spouse Name. Sometimes the label prints with the person name and the spouse in the form: John Doe and Jane. Other times the spouse is left off. I would like consistent behavior. At this point it truly seems random. I've tried deleting cards, rebooting and reentering new cards without effect. Can anyone help?
Does anyone know if the problem is resolved in Leopard? If so, I could convert my MacBook and print from it. I can't convert the MacPro yet because some 3rd party software that I rely on is not yet compatible with Leopard.

I encountered the same issue last year around Christmas time. This is what I learned about how Address Book works when printing labels:
If you have a spouse or child listed on contact card it will print them all on the mailing label IF the first name of each person is unique to your entire address book. For example, if the contact is John Brown and the spouse is listed as Susan Brown and the child is listed as Chester Brown, the expectation is that the label would print as:
John, Susan and Chester Brown
This assumes that there are no other contacts in your address book with the first name of Susan or Chester. However, if, for example, you have another person in your contact list named Susan (the last name could be anything), Address Book will print:
John and Chester Brown
This is because Address Book looks at all the first names in your contact list and if it sees a first name that is also listed in one of the spouse or child fields then it looks to see if the the other contact shares the same address as the contact you are trying to print. If the address is the same, then it prints properly on the label. If not, then it doesn't print on the label. So if you have two Susans - Susan Anderson and Susan Brown - Address book looks at the address on each card and determines that Susan Brown has the same address as the contact you are trying to print (John Brown) and therefore prints her name on the label.
So, to make a long story short, if you want consistent and predictable results when printing your labels you should assign a unique card to each person that you want to appear on the label and make sure that the individual cards have the same address listed on each. So, in the above example, there would be a card for John Brown, a card for Susan Brown, and a card for Chester Brown. On John Brown's card, Susan Brown would be listed as spouse and Chester Brown would be listed as child. Print John Brown's card and you should get:
John, Susan and Chester Brown
Although this makes logical sense, it's not incredibly intuitive and not very well documented by Apple. I was hoping they would enhance Address Book in Leopard since this seems like a feature that a lot of people would use around this time of year. Unfortunately, that wasn't the case this time around.
The next issue that you will probably encounter is what I'm dealing with now: I want to send Christmas cards to the home address of some people on my list and to the business address of others. When printing labels, you can choose to print home addresses, business addresses, all addresses (prints two labels, one for home and one for business) and Distribution List. You can choose your preferred/default mailing address for each contact in your group in the Edit Distribution List menu item. I did this and picked the default address that I wanted for each person on my list. The proper address for each contact should print perfectly when I print labels using the "Distribution List" option. Indeed, all my contacts print to the proper address BUT spouse and child names don't print on any of the cards - they only print when you choose All, Home, or Business!
Good luck!

Zebra Label Printing - DPI issue.

Hi Guru's,
I have a script for Zebra label printing. its an old script working fine. Now the issue is:
The above script is printing labels for 200 dpi printers as per the requirement.
Now one of the Markets have purchased 300 dpi printer. When the print the same label using the new printer using the script, they are getting the Label compressed.(i.e.. the Script is now much smaller and aligned to the left top corner, no data is missing but the Lettering is compressed and not occupying the total space alloted on the label).
I have chcked the manual for Zebra label printers, but could not solve my issue. Can any one of u help me. Thank you.
Here is extract of script used for initialisg the label:
/:   NEW-PAGE
/    ^XA
/    ^PW1200
/    DFI128FS
/    ^PRC
/    LH0,0FS
/    ^LL1500
/    ^LT12
/    ^MD0
/    ^MNY
/    CW1,B:CGTRI_NCW2,B:CGTRI_ICW3,B:CGTRI_BCW4,B:CGTRI_J^CW5
=    ,B:CGTRCO_NCW6,B:CGTRCO_ICW7,B:CGTRCO_J
/    LH0,0FS
Can anyone of you check this code & tell me where exactly the 'DPI' issue is handled in the script. Also any additions to the above script to acheive the solution....
regards,
Chaitanya L

Hi Balakrishnachaitanya,
i've made just a couple of sapscript whit the ZPL language, and i dont't think that you can set the DPI of print,
maybe you have to set the printer' settings.
Regards,
Davide

Destype=Printer; without url being redirected or popup window

In our old client/server enviroment, our users printed some reports directly to the printer. In the Oracle 9I web server, we user web.show_document to run a report with '_blank' so that the form is not changed to the report URL. Destype=Printer is in the URL and printers are setup on our AIX Unix server. It works but our users do not want to see any popup window and want to stay in a form. A message comes up saying "Report ran successfully". The users don't want this message or the window that it is in caused by web.show_document. They just want to print without seeing anything on the screen. Is this possible?

Hi,
Please try with following options
1. Enter DESNAME with in quotes as '\\rgasion\F5-copyroom east -1' and print the Report
(or)
2. Go To Windows Printer Setup, Change printer name to F5-copyroom_east_-1(Remove space with underscore), then try to print
or
3. If you printer is Shared Network printer, Open Printer Property dialog and go to Sharing page, there set share name as F5-copyroom_east_-1, then try to print
Thanks
Oracle Reports Team

Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

Hi,
No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My Labels Print without spaces ?

Similar Messages

Maybe you are looking for