My laptop doesn't recognise my ipod when I plug it in

I want to transfer my music library from my laptop to my ipod but when I want to sync nothing happens and I get the message reading "no device plugged in" when there is...

well, i didnt need to charge ipod cos its full battery,
restarting computer takes less than a minute,
restarting ipod takes less than a minute.
i cant reinstall itunes cos it has my whole library on it and i cant use homesharing anymore cos i gave the only other laptop with my itunes library on to my dad who took it to a friend of his about 30 mins ago. and also why would i need to reinstall it if i only installed itunes about 3 hours ago anyway? and its more like 25 mins actually cos i was already halfway through going through the article when i wrote the first post.
oh and fyi,  i dont have quicktime.

Similar Messages

  • My computer doesn't recognize my ipod when I plug it in.

    My computer doesn't recognize my ipod when I plug it in.  This happened after my daughter connected her ipod to my pc.

    Try here:
    iOS: Not responding or does not turn on
    Next make an appointment at the Genius Bar of an Apple store.

  • HT1320 My Laptop doesn't recognise my iPod nano. When I connect to laptop it charges it but does not recognise it as a storage device or iPod

    I have tried all of the online help topics and still cannot get it to work. It use to be fine on my old Laptop, but just will not connect to my new laptop.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - See if another computer sees the iPod in iTunes
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I tunes doesn't recognise my ipod since i've moved my songs

    Here's the problem. I was filling up my hard drive on my laptop so decided to buy an external network hard drive. I cut and pasted the I tunes folder into the new hard drive which took forever. Then I opened itunes and found that I had no music, so I changed the folder that it looks in to the new external hard drive. Still no music, so I decided just to add the whole folder back to itunes which has worked to a degree.
    My next and main problem is that when I plugged my I pod into the laptop it says that it's registered to another computer and that I can't access the songs which is very annoying because it clearly is the same computer that I have been using. Its almost as though it's a new itunes that doesn't recognise the ipod, would this happen because i've moved the data? Any one know what's going on??
    Any help would be amazing so I can stop banging my head against the wall.

    That message is misleading. What it really means is your iPod was synced to another *itunes library ITL database file*.
    Did you cut and paste the whole itunes folder, or just the _itunes music_ sub-folder?
    If you copied the whole itunes folder, try this - press *and hold* the shift key while starting itunes. Find the ITL file on your exHD and use that.

  • Itunes doesn't show all of the music on my ipod when I plug it in??

    This all happened since I downloaded itunes 10.5 and ios 5:
    itunes only shows some of the music on my ipod when I plug it in, (and click music on the left underneath 'Ellie's iPod' like normal), I've tried everything I can think of, and it's still only showing some songs, (always the same ones). also, if I edit an album cover or something in itunes, the change doesn't come up on my ipod either, so I can't edit songs in any way; it's driving me insane! I tried making a playlist on my ipod of all the songs that don't appear when I plug it in, and when it came up on itunes only one song was in it, and it wasn't even a song i'd put in the playlist.. (to make the playlist come up I synced my apps - when I checked the playlist on my ipod afterwards, this one song was there too).
    My itunes library doesn't have the same songs as on my ipod, so I can't just sync that to my ipod as I'll lose a load of songs, (and gain some ones that I don't want), I don't know what to do; I tried repairing itunes, and i've tried all the basic things like restarting my computer etc. I haven't tried unistalling and reinstalling yet, but I'm a bit hesitant to do that.
    If I go to the itunes store, the songs that I've purchased and that are appearing in itunes are greyed out like they should be, but the songs i've purchased that are on my ipod but aren't appearing in itunes are not greyed out, as if i haven't bought them, (yet they do show up in 'purchased' in the itunes store on my ipod..).
    It's all very confusing and hard to explain, but long story short, not all the songs on my ipod are appearing in itunes when I plug my ipod in, and I can't edit the ones that do.

    Copy everything from your old computer, or your backup copy of your old computer, to the new one.

  • HT2907 My laptop doesn't recognize my ipod nano 4th generation. What can I do?

    I connect my IPod to the laptop and it doesn't recognize it. My laptop doesn't recognize my iPod and Itunes neither.

    Hi Kegozz,
    Welcome to the Apple Support Communities!
    If your iPod nano is not recognized in your computer or iTunes, please use the links in the attached article for assistance troubleshooting. Please follow the correct link towards the bottom of the article based on if you are using an Apple computer or Windows computer.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Have a great day,
    Joe

  • Laptop doesn't recognise any plugged in usb devices

    laptop doesn't recognise any plugged in usb devices
    HP laptop G6000

    I went to the BIOS to check the power feature settings. Here's what I have set with the BIOS-offered explanation for each option:
    - ACPI BIOS IRQ--> *IRQ9*  [This field controls what IRQ the Advanced Configuration & Power Interface (ACPI) will use.]
    - ACPI Standby mode--> *S1*  [Select which power level your system goes to during standby. If S1 is selected, power is maintained to all devices but all processor activity is halted. If S3 is selected, power is maintained only for the main memory. Exit from the S3 state may not be supported by all installed adapters.]
    - Hard disk timeout--> *Enabled*  [Allows HDDs connected to the system board to automatically enter low power mode after a period of inactivity (about 20 minutes). HDD adapters may not support this function.]
    - After power loss--> *Power on*  [Select "Power on" if you use a power strip to turn the system on.]
    Yesterday I think I changed one of the above but it didn't help the problem with the detection of plugged-in USB devices.
    Today I turned off (disabled) Wake on LAN. This didn't help either: after plugging in one or more USB devices, I still have to open Konsole and run lsusb to wake up the system which then detects the already plugged-in USB device(s) and asks me what I want to do, what app I want to use to read or use the plugged-in USB device. This of course is only a minor annoyance-- maybe I'll never figure out or learn why this problem has been happening in my recently acquired older (2005-built) IBM ThinkCenter desktop tower.
    Do you still want to see the output of # lsusb -v  ?? Tell me where on the web I can post the long output of that command. [The output won't fit in this space-limited reply form.] Also, any more ideas on what could be wrong?

  • Laptop doesn't recognise back-ups on my old Time Machine disc

    The Apple store switched out my logiboard and RAM. In the process, they re-set my system. I want to re-install files and programmes from Time Machine, but when I plugged in the Time Machine disc, my laptop didn't recognise it. When I went to Time Mchine it wasn't showing any previous back-ups, even though they exist on the disc.
    How do I get Time Machine to recognise the back-ups on my Time Machine disc?
    Thank you!

    Hi brat1836
    Welcome to Apple Discussions.
    I presume that the HD in your Laptop is still the same one therefore when you connect the Time Machine drive and then open Time Machine preferences can you click on "Change Disk" and then select the disk that you have attached? My thinking is that by "changing" the disk and re-connecting to the one you have been using it should re-establish the connection.
    Chris

  • Why can't my computer see or find my ipod when i plug it in?

    why can't my computer see or find my ipod when i plug it in?
    so frustrating...

    See Here...
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    And Here
    iPhone, iPad, or iPod touch not appearing in iTunes

  • My computer won't acknolwedge my ipod when its plugged in and then some!!!!

    My computer won't acknolwedge my ipod when its plugged in and then it shows me a folder with an exclamation point on it when i try to turn it on or try to plug it into the computer it just stays at the little folder with the exclamation point. I have tried everything the FAQ and all!
    Can some one PLEASE HELP ME!
      Windows XP  

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Still no joy, see these.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    When restoring the iPod, put it into disk mode first.
    Putting iPod into disk mode.

  • I can't sync any new songs to my iPod, when i plug it in my computer I don't see the iPod icon on iTunes, please help.

    I can't sync any new songs to my iPod, when i plug it in my computer I don't see the iPod icon on iTunes, please help.

    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X

  • HT1597 How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers po

    How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers podcasts as the last step, and at other times randomly, when trying to just add some MP3's to a playlist, for example.  I can't seem to find any other option to uncheck, and can't find an answer from my so-far internet searching.

    erict, you blew me away with that suggestion! It was something so simple I couldnt believe I hadnt thought of it! But in the end it didn't work, which I was really surprised about. On Windows anytime anything was moved itunes was hoplessly lost, but on this mac it still kept up with everything. I tried renaming folders, moving folders, and even renaming moved folders but it still kept trying to import.
    I even went as far as deleting EVERYTHING i had moved to the Mac, which didnt really work. It still kept trying to import what wasnt there which made it continue to freeze up. However, after doing this it, the freezing was not nearly as bad. It gave me enough of a break to cancel it through the itunes dialog box at the top of the app. So in the end, thats all I really needed to do, only before I had deleted everything the freezing would not allow me to do it.
    So now Im reimporting everything again, only slowly, and only a few Artists at a time.

  • I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos?

    I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos? I have read other questions that say to plug the iPod into the computer and like un-sync it, but I downloaded the new iTunes and it doesnt have a photos tab. Does anyone know how to solve my problem? Please and Thank You, Megan!

    Just what did you do to the computer?
    It sounds like the iPodf is seening the iTunes libary as a new libary.

  • TS1538 My Ipod is showing the iTUNES Logo and freezing and when i try to connect to iTunes to restore, iTunes doesn't recognised my Ipod. Help Please.

    I was casually charging my Ipod when suddnely the iTunes logo appears, so i connected it to my laptop and itunes wouldn't recognised my ipod. I tried puting it in recovery mode various times but it just doesn't work. Please notify me if you have a resolution.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • SUBMIT works in one server and fails in another!!

    Dear All, I have the following SUBMIT statement that works in one server perfectly and fails in another with SY-SUBRC 8 [ Error in job scheduling (JOB_SUBMIT) ].   SUBMIT riaufk20 EXPORTING LIST TO MEMORY AND RETURN WITH SELECTION-TABLE seltab. Below

  • Fix needed? Bad tif froze cs5 ps: "No disk in drive. Insert disk into drive \Device\Harddisk2\DR2"

    Request response from Adobe moderator.  Work stoppage. 12-23-2010.    Windows 7 Home Premium.  64-bit.  All updates are done promptly.  Using NOD32 antivirus. Apparently I can't insert a Snagit 9 screen grab into this message.    Adobe's message said

  • While executing T.code F.5D system give"doc splitting is active in compcode

    Dear  Team, We are in ECC 6.0 and we have our business area wise balance sheet active and for some Business areas, balance sheet are not matching because of Non updation of business area in Tax line item for which we had configured OBXM settings corr

  • Is it possible to stop auction earlier than scheduled?

    Dear SAP gurus, We are using SRM server 550 and SP08 and we are using LAC. As a purchaser, is it possible to stop auction earlier than scheduled? I see one stop button there, but if i click stop button before the time is up, the system just give me m

  • Custom TypeMap for SQL Server

    I've created a custom type map for MS SQL Server and have gotten the IDE to recognise it but: When creating entity objects, any SQL Server column with precision - like varchar(x) or int(10,0) - is failing to match anything in the type map class. How