My laptop doesnt work...
My not even 2yrs old Macbook pro won't work. It powers up, but then loads forever... Never reaching the login page
I have tried letting it go and it just ran out of battery, still loading... This problem happened overnight, one moment it was working perfectly
and the next that happened... I don't know what to do, can I just show up at the genius bar or do I need more help?
If you have AppleCare, call them up. If not, just take a trip down to your local AS or an AASP. Diagnostic testing is FREE! That being said..............
Care to share which OS you are using?
When troubleshooting connect the Magsafe.
http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup
Similar Messages
-
My laptop won't start up, everytime i turn it on, it just stays at a black screen unless I press Esc
Try a hard reset.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.
Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling -
i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work. help plzzz
Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling -
Yutube, twitter, facebook doesnt work on my mac (10.4.11).
I checked my mac with other networks, it worked.
I complained to my network provider, but to my surprise, these sites
works on other systems (HP/DEL etc) on my network but
it doesnt open on my Mac pro.
I wonder what the reason could be.I'm running v10.4.11 on an older Mac laptop with Safari 4.1.3 installed and no problems accessing those sites. Click your Apple menu / Software Update just in case there's an update available.
Check Safari / Preferences - Security. Make sure Java is enabled.
Cookies could also be a culprit. Back to Safari / Preferences - Security. Click: Show Cookies.
Delete the YouTube, Twitter, and FB cookies. Quit then relaunch Safari.
If it's not cookies, try uninstalling then reinstalling the Flash plugin which is required for all three sites.
Instructions here > Troubleshoot Flash Player | Mac OS -
i cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!
Unless you're trying to tether your phone to your computer or create a personal hotspot, it won't pair with your computer by bluetooth. File transfer by bluetooth is not supported. So, you can quit trying unless you're trying to tether.
-
Personal hotspot on my iphone 5s operating ios7.1.2 doesnt work. my work laptop can see it and the phone initially registers contact but then it seems to give up and the connection always fails. i have tried resetting settings, switching hotspot on/off, switching 4g on off and nothing seems to work. it worked fine on the same service plan with EE on my old 4s. can anyone help?
Dear brothers
Thanking you so much to be interested about my answer but what I figured out is as long as you bought your iPhone from gulf or Arabian area it will not has face time application cause I think apple has made special software for Arabian areana to privent facetime according to special request by phone cells companies and one of my friends has told me if you want to make sure that your iPhone not for Arabian areana you should check the model number on your iPhone backside if it ends with 29 it means it's for Arabian countries if other numbers it's gonna be for US. Or Hongkong so it's ok
That's all I could know if you have another solution just please let me know
Thanks for all answers -
How can i save it permanently to my iPhone when everytime I sync i cant access it ? When i use home sharing as soon as the wifi is down it doesnt work ? I need it to be saved to my phone and I can use it on the go ! I need help, its killing me !!!!!!
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the iPhone forum.
Regards. -
My sister bought me an ipod touch less than a month ago. when he first came, he was conecting normal to my wifi, but today, he isnt. I use the same wifi at my laptop, and its perfectly working. My ipod identify the network, conects to it, but when I open an app that needs it, it doesnt work. What should I do?
And why is this happening?- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
Airport setup asst. doesnt work. Is there way to use Windows to add airpor
Airport setup asst. doesnt work. Is there way to use Windows to add airport express to my current linksys network so that my iTunes will play through my stereo?
Previously the air-assit recognized the air-exp unit but kept asking for a password to continue. I tried passwords like admin and public but nothing worked. Then Windows network connections kept trying to connect my laptop to the internet using the air-exp. Don't remember what I did to fix that problem but now my laptop doesn't try using it to connect me to internet anymore.
However, now air-asst. doesn't read the air-exp anymore. Windows network connections DOES read it now but doesn't try to use it anymore to connect me to the internet.
I have a linksys WAP and separate linksys router. If memory serves, when I firt got the air-exp about 6 months ago I could not connect either and Apple tech support had to help me. I think, but not sure, they had me use Windows to add the air-exp to my wireless network. Also if my memory serves me, but not sure, I had to type in either some IP or MAC addresses in order to get the air-exp to connect to my existing network. I DO remember thinking after it was finally working that "Wow, this is definately NOT a plug and play thing." It wasn't very easy to set up.
I lost my laptops wireless connection last week and couldn't connect to my network and had to call linksys tech support. They had me input a new IP and DNS address because somehow my laptop "lost" the previous ones. Since then I have not been able to use my air-exp to connect to my stereo.
I have called Apple tech support but since my 90 days is up they want to charge me $49.95 for up to five days worth of tech support. Which I think is a rip off becau linksys will help you out at anytime for fee but that's a topic for another discussion group. Common Apple, how about a $10 charge for one day of tech support, or even just 15 minutes worth to get my gear working again?
Anyway, if anyone knows of any on-line walkthroughs of how to deal with these airport express set-ups or problems please let me know. Or, of course if anyone can walk me through this that would be even better. THANKSThank you for your help.
When I run air-util a window called base station chooser comes up and all the fields are blank. When I push "re-scan" nothing happens. When I push "other" a window pops up asking for IP address and password. I typed in the IP address given to me from Linksys tech and tried to move on but it came back asking me to fill in the password. I tried the default linksys password "admin" but it came back with an error.
Do I hard (factory) reset the air-express by simply pushing the reset button or do I have to hold it in while I plug it in or simply push the button for a certain length of time?
Thanks again. -
I dont know why this doesnt work now. I updated to 11.1.3 on my windows laptop. I followed all the steps on other posts but it still doesnt work... HELP!
Welcome to the Verizon family irishlass82! I know how important it is to stay in touch and we'll make sure that you don't regret your decision! Before trading in your device, did you turn off iMessage? In effort to correct this issue, text the word STOP to 48369.
AshleyS_VZW
Follow us on Twitter @VZWSupport -
Showing product key doesnt work
Hi, my name is varun, I bought my laptop (G6 pavilion 2320tx) one and a half year ago with inbuild windows 8 in it, 2 weeks earlier i refreshed my laptop. Now its showing "Activate Windows, This product key doesnt work". What should I do......
Try Factory Reset:
http://support.hp.com/us-en/document/c03546603
Else HP System Recovery should work:
http://support.hp.com/us-en/document/c03489643
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution" -
Cannot connect to WLAN because FN+F8 doesnt work!?
Can anybody help or I have to get my notebook to guarantee. I have problem with wireless capability of my computer because FN+F8 doesnt work. I bought my notebook 3 days ago and thats very big problem for me. I have to get to wireless connection.
Please help
RiunoI had the same problem on my new L300 laptop and the wireless adapter couldn't be found.
I was advised by my dealer that this is a problem that the software was not installed by Toshiba and the solution is to
create a backup DVD and reboot from that.
I created the DVD and the machine advised me to shut down & install some updates that had materialised.
The updates solved my problem.
I didn't get as far as rebooting from the DVD.
I don't know if the process of creating the backup opened the wireless driver, or whether while searching this forum (using a cable) the computer automatically checked for windows updates, but any way, it now works! -
Hp pavillion dv6 password doesnt work,,!!!
... I cant open my hp pavillion dv6 laptop...ive set a password before but i dont know why it doesnt work anymore..when i try to open it always says "the user profile service service failed the log on,user profile cannot be loaded"!!
I dont know what will i do...im afraid to lose all my files..please help.........
tnx in advance for your help...
...pauline
This question was solved.
View Solution.Hello Pauline05
Thank you for posting on the HP Forums!
I understand that you are experiencing a "the user profile service service failed the log on" error. I apologize for the inconvenience, but I will do my best to assist you! Fortunately, there is a Microsoft document with complete troubleshooting for this issue here: You receive a "The User Profile Service failed the logon” error message
Please try all of these steps and let me know the results. Thanks again for posting and have a great day!
Mario
I worked on behalf of HP. -
My Laptop's AMD catalyst Control Center Doesnt Work. It used to Work But I Accidently Deleted One of the AMD catalyst Files. And then After that I cant use it. I got no Recovery. Everytime I click Configurable graphics. It shows a CLI.exe - Application Error. The exception unknown software exception (0xe0434352) occured in the application at location 0x788d8b9c. I tried Redownloading The AMD catalyst thing with the suitable one But it still doesnt work And happened the same thing again. Anyone can help me solve this problem? I was using AMD Website to download it.
RedCheesecake wrote:
My Laptop's AMD catalyst Control Center Doesnt Work. It used to Work But I Accidently Deleted One of the AMD catalyst Files. And then After that I cant use it. I got no Recovery. Everytime I click Configurable graphics. It shows a CLI.exe - Application Error. The exception unknown software exception (0xe0434352) occured in the application at location 0x788d8b9c. I tried Redownloading The AMD catalyst thing with the suitable one But it still doesnt work And happened the same thing again. Anyone can help me solve this problem? I was using AMD Website to download it.
Means you need to go to your HP driver site and redownload the AMD driver for your O/S and reinstall it again and hopefully this should fix the problem.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-
Maybe you are looking for
-
I have uploaded photos from the past and they are automatically arranged by date. As a result, there are many events grouped into one library/event/folder/album (not sure of the proper terminology) I'd like to separate them into folders/albums/smart
-
Can't create a 3rd partition in Disk Utility
Long story short I have used Boot Camp to get Windows, so I have 2 partitions. But, I need to create another partition to install another copy of Windows on it, but Disk Utility has grayed out the '+' to allow me to create a new partition. All I can
-
How To use JFree chart in Oracle Forms 11g ?
Hi all I had a graph in oracle forms6i I would like to convert them to 11g forms as graph builder is not supported by oracle forms 11g while goggling came to knew that there is Jfree chart through which we can develop the same as 6i graph..but unable
-
Failing to extract xml value using Jdom & Xpath
I have a method (getSingleNodeValue()) which when passed an xpatch expression will extract the value of the specified element in the xml document refered to in 'doc'. Assume doc at this point has been initialised as shown below and xmlInput is the bu
-
How to force rpc.nisd_resolv to stay off in Solaris 10?
I've got a couple Solaris 10u3 hosts running as NIS slave servers to a Solaris 8 master. I'd very much like to have them stop spawning rpc.nisd_resolv, so they won't try to do DNS lookups for clients. I've done the traditional two things that accompl