My laptop L2000 lance Armstrong only boots to a black screen with a cursor.

My laptop only boots to a black screen with a cursor. Can this be because the board numbers may be different then whats on the HD? I swaped a HD from a old and ugly L2000 to a new and shiny looking laptop! dbarselow

Boot from the first of the system discs (by holding down the C key until the welcome screen goes away) and, in Disc Utility, repair privileges. Not just permissions, but privileges. Then reboot at normal. That will probably fix it.

Similar Messages

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.

Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support

Black screen with no cursor after installing Windows 7 through Boot Camp on Retina MBP

Hey all.
So, I have a Retina Macbook Pro (15", late 2013). A couple weeks ago I tried to install Windows 7 on it through Boot Camp.
After some struggles with trying to repair my disk with Disk Utility and having to recover the system etc, I finally managed to actually install Windows 7. However, after the installing was ready, when Windows was supposed to boot, it just gave me a black screen with no cursor. I really had no idea what to do there, I tried to do some research from google but only found answers regarding a black screen with a cursor DURING the installation. However, I managed to launch Windows in safe mode. I deleted graphics drivers that bootcamp assistant had installed, and then it worked and I got to boot Windows succesfully.
However, as probably all of you know, you can't do much without those drivers. Games, videos, overall performance of the system is kinda horrible.
After that, I wiped the whole system, Mac and Windows, and reinstalled Mac. During the Windows installation I was running on Mavericks, now I've got Yosemite. I might try installing Windows again next week, does anyone have any clue why the black screen happened? What could I have done wrong? And the most important question in my mind, in case that happens, is there any way to install the graphics drivers manually from somewhere? After I uninstalled 'em earlier, I tried to find them manually, but couldn't find any.
Thanks!

Yes, that's exactly what was the problem in the first place, I had a USB3 device. Switched to USB2 device and the installation progress started flawlessly.
The later part I didn't quite get. What are those installation methods, how could they cause the problem there? I had no problems during the installation, but after installation when launching Windows I had the black screen, and that I suppose was GPU drivers problem if I'm not totally wrong? I could hear the basic Windows system beeps etc when I tried clicking everywhere (had no cursor either, just clicking randomly), so the system was running there, but just didn't draw the picture at all.

Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

Boot Camp- Windows installation boots to black screen with blinking cursor.

I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

I'm sorry to learn that your phone is having problems starting up, marinema08. I'm sorry if this is incorrect, but are you using the original HTC Droid Incredible or a later Droid Incredible model? Please try placing your phone in Safe Mode to see if you are able to move past the Droid eye. http://vz.to/1kdQWVI If you are able to enable Safe Mode, please try deleting any recent applications you have added.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Sometimes when I open my laptop back from sleep, I get a black screen with the cursor showing.

Recently I've been getting this weird problem where my macbook air will show a black screen with only the cursor visible that I can move around but nothing else can be done to get to the desktop. The only way is to close the lid and wait for around 10 or more seconds and then open the lid again to bring the laptop back from sleep and hope that the laptop goes to the lock screen and then to the desktop. This works often but sometimes the only solution seems to be to restart the laptop. This also happens when I tilt the lid to the point where it is almost closed and when I tilt it back the screen presents the above state. Theis has been happening often now and it is almost impossible for the above not to happen atleast 2 to 3 times a day. iThis is a relatively new problem that has been occuring since the past two weeks or so and never happened to me on my Macbook Pro 15 2011. My current system is a Macbook Air 11" 2013 Haswell 1.3 Ghz 4GB RAM 256 GB SSD. Now I dont want to have to send in my laptop if I dont have to if there is a way I can solve this myself. Anybody else have this problem?

Hello tseten,
I would be concerned too if my MacBook Air was not waking from sleep appropriately. For an issue like this, I recommend resetting your System Management Controller (SMC) and NVRAM.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964http://support.apple.com/kb/ht3964
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
You can find the full article here:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thank you for using Apple Support Communities.
Best,
Sheila M.

Windows 7 on Boot Camp stuck at black screen with blinking cursor... starts up fine in Parallels desktop

Hi,
Recently my dad's Windows 7 (Ultimate 64-bit) on his Mac Pro has stopped working. It gets stuck at a black screen with a blinking cursor. I've waited at least five minutes and it doesn't do anything, I have to power it off.
However it starts up perfectly fine and intact in Parallels desktop. If I insert the original installation DVD and boot from the Disc that says 'Windows' it will boot into the partition and work fine, unless I press a key to boot from the DVD.
I find both these things to be strange. The partition is backed up, which is fine, but I'd rather not have to re-install it if possible.
I have booted from the DVD and tried to repair the disk. It said it found a problem with something related to startup and that it needed to restart to repair it. I clicked yes, and then held alt/opt and (I think wrongly) booted back into the disc rather than the Windows partition. However it now says that it can't detect any problems.
In the repair my computer section when booting from the DVD, it detects the OS as Windows Vista Business. I followed these steps I found online:
Fixed! Peroblem was I think using OEM, which Bootcamp advise against using... they advise to use retail only. Fixed like this:
1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.*
Done. Rockin'
FixMbr was successful, as was FixBoot. However RebuildBcd reported that it found no Windows installations.
Does anyone know what could be wrong here? I should note that recently I removed the drive Windows 7 is installed on and put it back in. Also Windows Updates probably have been done by my dad. Not sure if they could be the problem.

Cult, welcome to the forum.
It sounds like you have a failing power supply unit (PSU). This will cause the symptoms that you describe. If the computer isn't getting enough power, it can cause numerous problems. You can try disconnecting any unnecessary components to see if it will boot. Here is a guide to help you troubleshoot the problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Black screen with blinking cursor while trying to boot from Win Install CD

I'm running Leopard with all updates on a brand new MacBook Pro.
I initially had no problems with Boot Camp - the Assistant partitioned my drive, I put in my Vista DVD and hit Start Installation and the MacBook rebooted from the Windows DVD just fine. I made a mistake, however, when I used my retail Leopard disc instead of the install DVDs from my new MacBook, so the wrong drivers got installed and things were a mess. It wasn't painful setting up Boot Camp, so I decided I'd just go back into Leopard, wipe the Windows partition, and retry.
The Boot Camp Assistant had no problem merging the boot camp partition back with the main one, then making a new boot camp partition (I'm not sure if this was necessary, but I did it). I then put in my Vista DVD again and hit Start Installation. The MacBook rebooted, but not into the DVD - it just sat at the black screen with the blinking cursor in the top left corner. After 10 minutes of nothing, I held the power button to shut the MacBook down and tried again - same thing. I booted back into Leopard and tried Start Installation again - same problem. I remerged the boot camp partition, restarted the MacBook, then made a new partition and tried the Vista DVD - again just that blinking cursor.
What went wrong and how do I fix it?

Try resetting the PMU. See link here.
http://discussions.apple.com/thread.jspa?messageID=7188736
I tried everything mentioned previously (in this thread AND the link thread) and the PMU reset (shutdown, pull out power cord and other cords, wait 30 seconds, plug back in and restart) let me continue to install windows after partitioning the HD. Good luck!

Satellite L300D boots into a blank screen with mouse cursor

Hi,
I have been asked by friends of mine to help them fix their L300D. Their son got to it and they are not sure what he did, but now when it loads into VIsta, all they get is a Black Screen with a mouse cursor in the middle. The cursor looks as if it is at a lower resolution than the normal display.
I thought this would easily be fixed by running a restore, but it does the same thing when I load the restore function (via holding 0 on boot), and even the copy of Windows 7 I tried to install as well.
I think it might be a hardware issue, but before getting them to contact Toshiba Service for a warranty repair, I thought I would post here and see if anyone has any suggestions on what it could be.

Hello
Well buddy, if the same issue appears if you load the restore function and also with Windows 7 I think its a hardware issue.
You can try to load the default settings in BIOS Maybe it works.
To be honest I think the best way is you contact the nearest authorized service provider. The technicians can check the notebook and exchange the hardware if there is a hardware problem.
Greets

Computer boots to a black screen with prompts and code!?

hey
I have a Powerbook G4 15" 1.5GHz Aluminium.
I recently had big issues with the computer where it froze and kept crashing. The computer then completly died and i had to take it into an apple store for repair.
While it was in i had the ram slot failure repaired also (go apple!)
The technician repaired the directory structure on my hard drive but noted a program, which he thinks is XPostFacto has some how come to be installed on the system. I collected it and as soon as i got home backed up all the data i needed.
When booting the computer into OSX the startup would go to the grey screen with an Apple and the spinning gear. Then a black screen would come on and present me with a whole heap of code about the system etc the system would then proceed into OSX as normal. I managed to copy all the data i needed onto an external HDD however in the process the computer crashed multiple times.
I have now come to reformat the entire thing, i have zero'd the drives etc however even after that, when i boot from the install CD i still get this screen of code!!
I tried to install Panther and it won't work due to an error in installation..
What do i do?!?!?
I'm not too up for the idea of taking it back into the shop cause they will charge me mad prices ($120 an hour!) to fix it for me..
Any help would be awesome!
Powerbook 1.5 GHz G4 15" Aluminium Mac OS X (10.3.8)

Boot from the first of the system discs (by holding down the C key until the welcome screen goes away) and, in Disc Utility, repair privileges. Not just permissions, but privileges. Then reboot at normal. That will probably fix it.

My iMac won't boot, get a black screen with alarm sound, then gray screen with start up sound, then repeats

this problem started last fall after upgrading to Mavericks. If I shut down my computer (or restart) I have problems getting it going again. This is getting progressively worse. I hadn't shut down in over a month, forgot about this issue and shut down (which I used to do daily), so now I can't get my computer to boot. When I hit the power button I hear it starting, then a loud alarm sounds, then a long pause then start up sound with a gray screen with a progress bar. Once the progress bar fills, the screen goes black again for a bit. This whole process will repeat until I get frustrated and force - shut down by holding the power button. I have tried reseting the pram, starting up in safe mode, starting up with the command - R, starting up with my original install disc... none of it works. I'm at a loss! I do have an external hard drive that I have been using for Time Machine, but it's not recent because the disc needs repairs and I hadn't gotten around to buying a new HD to back up to first. Has anyone else had this problem? I really can't afford a big repair/replacement bill.

A long, steady, load tone followed by a progress bar can indicate it is trying to install a Firmware Update. Any other Tones would be multiple beeps and show an error code.
http://support.apple.com/kb/HT5860
You can also see a progress bar similar to booting into Safe Mode. However, the firmware update bar is thinner vertically than the Safe Mode bar.
http://support.apple.com/kb/ht1455
Either way, I would say something is wrong and it would be better evaluated at an Apple Store as Kappy points out.

My iMac will not boot up. it brings up a black screen with a cursor

all of a sudden my imac will not boot up. it brings up the grey page with the apple, then instead of going to the login, it goes to a blank black page. The cursor moves with the mouse, but that is it

First carefully read and then methodically follow Apple's troubleshooting steps in Gray screen appears during startup

HT4623 i updated my ipad 2 with ios 702 today and it has crashed only showing me a black screen with the itunes logo and a charging cable diagram on it. wont turn on at all, any help appreciated?

I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?

iPad is in Recovery mode.
Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start.

Reset my laptop now I can't get past this black screen with text?

I tweeted toshiba telling them my problem on Twitter (about how it would let me log in but it wouldn't take me to the desktop, it would just keep loading for hours til I would turn the computer on again to try and use my laptop) then direct messaged the @toshibausahelp and asked them if I should just reset my laptop and asked if it would then work. The person messaged me back and told me to reset my computer so by pressing f8 at the toshiba logo at the start up it took me to the options to reset my laptop. Then it took like 2 hours to reset and then my screen literally says "reboot and select proper boot device or insert boot media in selected boot device and press a key" idk what to do? That's the only place it'll take me to, any key I press won't effect it. Everything is gone which I knew it would be, but I thought resetting it would give me a fresh start to try again. But I can't even try, it won't let me go anywhere else can someone help me. I got this laptop in June and it's had so many problems. It's a satellite c55-b5202
Attachments:
image.jpg ‏2048 KB

Aftre the reset you need to configure correctly your router. Using Cisco Connect is the more easy way because it try automatically to sense the type of connection without asking to the user/operator. If you don't have Cisco Connect you have to configure manually using the web interface (http://192.168.1.1) but you need to know the right parameters for your ISP (and they depends only from your ISP, not from the router). You can try also to ark the customer support for your ISP or find another user with same provider and use similar parameters.
You can also try to re-download Cisco Connect software from here:
http://downloads.linksysbycisco.com/downloads/utility/1224662063213/CiscoConnect.E2000.1.3.11006.1.e...
Of course you can connect your computer directly to modem for the download, then reconnect router between you and your modem. Better to connect router to you computer with cable, not wireless for first configuration.
Ciao
Roberto

Desktop stuck at black screen with cursor in normal mode but boots fine in safe mode after updates.

After running some updates the other night my laptop stopped loading the desktop and just gets stuck at a black screen with a cursor after I log in to the user account. The only thing I can do from there is do ctrl+alt+delete, then log off or restart.
I can't open up task manager. I tried creating another account in safe mode thinking there was an issue with the account but I still have the same issue. In event viewer I have two warnings one is
event 6000 winlogon, The winlogon notification subscriber <GP Client> was unable to handle the notification event
and event 4006, winlogon The windows logon process has failed to spawn a user application. Application name. Command line parameters: C:\Windows\system32\userinint.exe.
As well as error event id 1003, CertificateServicesClient Certificate Services Client failed to invoke the Providers in response to event 512. Error code 2147956401
and error 1001, certificate services client. certificate services client failed to load provider pautoenr.dll. error code 14001. I checked the registry and the path points to the right directory for userinit. I have tried running
System Repair but no errors were found, and I ran sfc /scannow and no errors were found either. The computer did not have System Restore enabled and I do not want to restore to factory settings. I also ran registry mechanic and it found no errors. Any suggestions
besides restoring to factory settings?

Hi,
We may try to reinstall Windows 7 Service Pack 1 for a test.
In addition, let us perform the following steps.
1. Click Start, Run, type lusrmgr.msc then ENTER.
2. Select Groups in the left pane.
3. Double-click Users in the right pane.
4. Click Add, and then click Locations. Scroll to the top of the Locations dialog and select the local computer name, then click OK.
5. In the Enter the object names to select field, type Interactive; Authenticated Users (separated by a semi-colon). Then click OK.
6. Restart the computer.
Or we can run the following commands from a command prompt:
Net localgroup Users Interactive /add
Net localgroup Users "Authenticated Users" /add
Kim Zhou
TechNet Community Support

My laptop L2000 lance Armstrong only boots to a black screen with a cursor.

Similar Messages

Maybe you are looking for