My laptop once turned on wont on any further than the apple logo
My laptop once turned on won't go any further than apple logo
Try starting your computer by holding down the command + R keys, then run disk utility on your hard drive. If you are running a version of Mac OS X 10.6 or lower you will need to try to start you MacBook with the original DVD. Take a look at this link, http://support.apple.com/kb/HT1782?viewlocale=en_US&locale=en_US
Similar Messages
-
Help! 80gb Classic ipod - wont go any further than the license agreement.
Hi,
Hope somebody can help - just bought a 80gb classic after my old one died.
I've plugged it in to my computer and it comes up with connecting, goes into itunes and shows me the licensing agreement. Ive then ticked the box saying that i have read it then clicked saved which then takes me to wherever i want it saved. Clicked ok then it goes back to itunes and doesnt do anything, its just left on the licensing agreement page.
Ive taken off my previous itunes and reloaded with the current itunes with still no avail - also switched off norton anti-virus which doesnt seem to be affecting it.
Anybody have any ideas what it could be?Are you seeing a Continue button anywhere? Click the little Agree box then the Continue button, there's no need to save the agreement. If you aren't seeing all the buttons try increasing your screen resolution to at least 1024x768 so you can see the whole page: iTunes window does not display all options
-
Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo. Tried reset option/troubleshoot several times. Also wont show up on computer at all when I plug in to USB.
Any tips are very much appreciated.Place the iPod Touch into DFU mode. This will be similar to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the latest iOS for your device.
Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it) Or go into an Apple Store. -
What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
When I turn on computer I can't see the apple logo the screen is just a gray screen
When I turn on computer I can't see the apple logo the screen is just a gray screen? I know a person presses "alt" to switch people apple and windows using bootcamp, but I just don't see the apple logo anymore. What is wrong with this thing?
So, do you see any boot choices if you hold alt at bootup?
-
My ipod touch is frozen wont do anything, but displays the apple logo only
my ipod is frozen wont do anything, but displays the apple logo only
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
my phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??
Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).
-
I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?
Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it. -
Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks
Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable. -
My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
My Mac book won't turn on. All I get is the apple logo and a loading icon and bar, then it just shuts down. What do I do?
What OS are your running?
Mavericks 10.9.4 boot into recovery and run the DiskUtility >Repair Disk
Recovery http://support.apple.com/kb/HT4718 -
On my Iphone 4s, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. A few days before that the speaker suddenly stopped working during a call. I also reset everything by connecting to itunes but no luck then. help?
Hey there xntricj,
It sounds like you are putting a password for your Apple ID that works without issue on your iPad into your iPhone but get a message saying that the password is incorrect. I recommend the steps from the article named:
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
After completing iOS 7 setup, go to Settings > iCloud.
Scroll down and tap Delete Account, then enter your previous Apple ID and password.
If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
My little brother stole my iPod touch and when I got it back I tried to turn it on and it goes to the apple logo, which its usual, then it gets stuck on a Playboy bunny logo and won't go away.
connect it in recovery mode, then restore from your backup.
-
ANY IDEAS WHAT I CAN DO
Mike19981 wrote:
I just updated my phone today to ios 7 a iphone 4s once it turned on it wouldnt boot past the apple logo
Perform a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Acrobat 7.0 error 1311, file needed
During install, error 1311 comes up. Source file not found C:\Program Files\Adobe\Acrobat 7.0\Setup Files\AcroPro\ENU\Data1.cab , then the process quits and I cannot install product. Any suggestions how I can get this file? Next step?
-
MX 6.1: ARGUMENT values in the wrong place
Im having a very strange problem. I have a CF web service I am invoking and sending it several arguments. In one web service method it works fine and Im only sending 3 arguments. The other I am sending 6 and when I dump the ARGUMENTS arrary the value
-
The date and the time of printed of purchase order
Hi, Wich field can me watch the date and the time of printing document like purchase order Thanks in advance
-
Hot backup centralized of database distributed
I will like to know if it is possible to make a hot backup of the data base distant help!
-
I'm unable to turn of the lidwake.
With my powerbooks I always turned off the setting that wakes the computer from sleep when the the button is pushed. This is essential when I travel as I don't want the thing waking up in my bag accidentally. But this doesn't seem to work on the MacB