My laptop's internal speakers have stopped working since i connected my wireless beats through bluetooth

My laptop's internal speakers have stopped working since i connected my wireless beats through bluetooth. It's as if it no longer recognises any other audio output, even when i have disconnected the headphones

System Prefernces > Sound > Output
Internal Speakers selected?
"Mute" enabled?  Disable it
Reset PRAM.  http://support.apple.com/kb/PH4405
If this does not help, try resetting SMC.
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Similar Messages

  • Internal speakers have stopped working (Lenovo W500 with Win 7 Pro)

    Hi
    I have a Lenovo W500 4062-5YG... O/S: Win 7 Pro
    My sound device is a Conexant 20561 SmartAudio HD.
    The problem is, that the internal speakers have stopped working all of a sudden... I think it is a hardware problem since when I hookup external speakers or headphones they produce sound... but I am no expert!
    I have done the following to try and fix it:
    Disable, then enable audio drivers
    Uinstall, then install audio drivers
    Setting the internal speakers as the default speaker source
    Restoring the system to an earlier day (where I knew that the speakers had functioned)
    None of these actions have worked.
    I actually thought I could perform a hardware test on the speakers in the "Lenovo Solution Center"... but it doesn't seem like it:-(
    So...
    How can I know for sure whether it is a hardware or software problem?
    And more importantly - How can I get my internal speakers to work?
    Any help is appreciated.
    Cheers
    Philip

    Hello Philip,
    As mentioned in your post, you have performed all the major troubleshooting steps to resolve the issue. I suggest you to update your BIOS also in order to resolve your issue. You can download and update the BIOS update utility from the below mentioned web link.
    http://support.lenovo.com/en_SG/downloads/default.page?
    Kindly click on Quick path and put your 7 Digit TYPE-Model number(40625YG) in the box and then click on the Find My Product. Please click on BIOS and then download the BIOS update utility according to your Operating System. It might resolve your issue. If it will also not work then it seem to be an issue with hardware. Kindly get in touch with the support centre they will assist you and try to resolve the issue.
    Regards,
    Harish
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    Though I have doubts for success, you might try a SMC reset.  It can do no harm.  Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
    http://support.apple.com/kb/HT3964
    Ciao.

  • My inernal speakers have stopped working. I now have a little 'no entry' sign.

    My internal speakers have stopped working - when I click on 'sound' I get a little 'no entry' sign; I've done all the Preferences things, and looked at Help, but no result!

    Though I have doubts for success, you might try a SMC reset.  It can do no harm.  Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
    http://support.apple.com/kb/HT3964
    Ciao.

  • I have an hp dv6910us and the system speakers have stopped working. I cannot reinstall the driver.

    I have an hp pavilion dv6910us and the speakers have stopped working and no longer show as installed as a device.  I have tried reinstalling the audio device driver, but the hp website does not list a driver for my specific laptop.
    Right now it shows that I have a bluetooth audio device installed.  I have never installed this device and don't know where it came from.

    I had the exact same problem, updating updating the Mbox 2 drivers on the Avid website has fixed the problem.
    http://avid.force.com/pkb/articles/en_US/Download/Mbox-2-Drivers?retURL=%2Fpkb%2 Farticles%2Fen_US%2FDownload%2FMbox-2-Drivers&popup=true

  • My iphone5 speakers have stopped working.  the headphones still work as does the ringer.  the phone indicates it is still in headphone mode.  does anyone know how to fix this ?

    after running i disconnected my iphone headset.  since then my iphone speakers have stopped working.  i can still listen to music using headphones and the phone ringer still works but the speakers are silent.  when i adjust the volume it indicates it is in "headphone" mode.  Any idea how i can solve this problem ?

    I have read in other threads with similar problems that cleaning the headphone jack/port seems to usually work.  The simplest method is to rapidly plug/unplug the headphones a few times.  See if that works.

  • What do i do if my speakers have stopped working?

    what do i do if my speakers have stopped working?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
    Apple Retail Store - Genius Bar

  • FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. Can u please help???

    FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • Hp Pavillion Laptop with Windows 8 - Speakers have stopped working but headphones do! Please Help!

    Please someone help - the speakers on my laptop have stopped working all of a sudden! But the headphones do though there is a low buzzing sound when i use them.
    When in control plan to look at the problem it tells me they are working. 
    Please help - laptop is only a few months old!
    You will be my hero.
    This question was solved.
    View Solution.

    Hi,
    Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Properties.  Click the Driver tab and then click 'Update driver'.  Select 'Browse my computer for driver software' and then select 'Let me pick from a list of device drivers on my computer'.  Left click 'High Definition Audio Device' once to highlight it and then click the Next button to install it.
    Has this made any difference?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My speakers have stopped working

    My speakers have stopped working

    Did they have you try resetting the PRAM?
    http://support.apple.com/kb/HT1379?viewlocale=en_US
    The speaker volume setting is stored in PRAM, so resetting it sometimes helps when the speakers aren't working.

  • My iPad Air has the latest software update, since that the location services are not working! What to do? Even my friend's iPod has the same problem. Our version is iOS 7.1.2. I think that the services have stopped working since iOS 7.0.4.

    My iPad Air has the latest software version(iOS 7.1.2) update, since that update the location services have stopped working. have a solution?

    I have had the same problem, so many apps do not work properly without it! Apple says the internet satellite, the Internet satellite says Apple, back and forth with the blame instead of fixing the problem. Have turned location on and off, reset everything multiple times ( lots of hours and bandwidth to download ), Siri is now working part time, I guess she has cut back her hours for the summer. Even in these forums was suggested to check with Skyhook who does the global positioning, and after hours with them, they ended up saying that they have nothing to do with it anymore, Apple does. All to no avail and much frustration! I wonder if this is happening with the iPhone's? i'd like to know if this is happening with others that do not use satellite as their ISP? That would help narrow down the argument with Apple vs. satellite. Fell for you! Someone please help us! Ta

  • Pavillion Laptop with Windows 7 - Speakers have stopped working but headphones do!

    Hello
    I have a Pavilion dv6 Notebook, with an AMD A8-3500M APU and Radeon HD Graphics card.  It is a Windows 7 64 bit system and was purchased in october of 2011
    The speakers on my laptop have suddenly stopped working, but external speakers continue to function.  I have tried the windows troubleshooter, resetting defaults on playback devices, and updating drivers both through the device manager and through HP Recovery manager.  I have tried uninstalling and re-installing drivers, and a hard reset ofthe computer (unplugging all devices and power sources, waiting and restarting).  I have tried System Restore to restore the system to a date before the problem.  None of these have helped.  Anyone have any ideas?

    Hi there @Rob5 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are having problems with the notebook speakers., and I am happy to help with this. From all the trouble shooting you have described it sounds like it may be that the speakers themselves may have gone bad, or the connection is loose.
    Before we look at the possible physical problem, take a look through this page first, just in case there is something you have not yet tried.
    No Sound from the Speakers (Windows 7)
    If you are still getting now sound, then take a look through page 62 of 137 in this guide:
    HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide
    That page shows how to replace the speaker assembly and the relevant part number, but before going that route, I would suggest just disconnecting and reconnecting the speakers, in case it is just a bad connection. Over time a connector can work itself loose. Just doing that may fix the problem. If not then you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • T510 - internal speakers just stopped working

    I have a T510 using the Contexant 20585 SmartAudio HD driver for the internal speakers. Today they just stopped working. I run the tests and I get no sound left or right. Now I did notice something odd. I open Control Panel and then I click SmartAudio. I then click the third icon from the left at the bottom of the screen (Audio Director). Now on the right hand panel of the screen I see a large, red 'X' beside the laptop. That would be between the laptop and the headphones.... anybody know what that is? (Would it appear to signify that something is amiss with the speaker?)
    Anyway, I've uninstalled, installed the latest drivers (May 2010). Still nothing... any ideas?

    I can merely offer a suggestion, reset the iPad.
    Press Home + sleep/wake buttons simultaneously until the white Apple logo appears.

  • I was using my iPad this morning and my internal speakers just stopped working when I tried to turn my nighttime playlist on. Does anyone know what I should do?

    I was listening to music this morning and the speakers on my iPad were working perfectly fine. Then I opened my iSleep App and used it to turn on my nighttime playlist and my alarm clock and my speakers weren't working. I tried restarting it (twice) and it didn't work.
    I plugged my headphones in and sound still comes out. And I don't listen my music all the way or for very long, so I'm pretty sure the speakers didn't blow out.
    Does anybody what the problem is?

    I can merely offer a suggestion, reset the iPad.
    Press Home + sleep/wake buttons simultaneously until the white Apple logo appears.

  • My computer's speakers have stopped working

    Started about a week ago.
    It does not make any sound at all. I ran the control panel feature and the speakers are enabled. The sound is maxed and mut is not on.  
    The test tone did not work.
    I ran the HP support assistant and it did not detect any issue.
    My sound equipment is IDT HD Audio CODEC and Intel Display Audio. Drivers: stwrt64.sys and IntcDAud.sys.
    I have a Pavlion dv7, run Windows 7.

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for

  • Scheduled report failed after 10 mins

    Hi Everyone, We are using Business Object XI 3.1 and Crystal Report 2008. We have a few reports which uses Java Beans Connectivity. They all run fine using Crystal Report 2008 Designer. After I publish the reports to the server and schedule it to run

  • Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

    Hi friends, Error while uploading transport request to the transport directory, we downloaded the transport request from one sap system which have a set of developments(contains screen programs) for example downloaded all co files and data files cont

  • JDBC adapter started but no message is created

    I am not able to read data through JDBC adapter. When we are starting our inbound JDBC adapter it get started and does not give any error but no message is created in XI.When we check status of adapters by clicking main menu it is red. Log of adapter

  • Restriction on memory scope for UI components binding

    Hello I'm using JDeveloper 11g 10.1.1.3 I found in the Fusion Developer's Guide for Oracle ADF (14 Getting Started with ADF Task Flows) next thing: <i> Restrict the scope of the managed bean that you reference through a UI component's binding attribu

  • Displaying BPF listing within a SharePoint portal

    All, Are there any standard SAP/BPC webparts that would display a list of reports or business process flows within a SharePoint portal?  Currently, I have taken to chopping up the various .js files and embedding them into our portal, but that functio