My laptop will not startup I did a diagnostic check and it detectef no problems what should I do?

My laptop will come on but will not start up. What could the problem be? I did a diagnostic check found no issues

Please post your full product Number
http://h10025.www1.hp.com/ewfrf/wc/findModel?cc=us&dlc=en&lc=en
#2
Please Do Not post your s/n

Similar Messages

HT201412 my iphone will not charge. I have tried everything and it just wont charge. what do i do? This is the second charger i have had to buy and i really dont wanna buy a new one

my iphone will not charge. I have tried everything and it just wont charge

Did you try connecting to a pc or man?
If no then try it.

Laptop will not startup.. please help!!

I have a L505D-S5983 w/ Windows 7 that will not start up. when i turn the power on everything looks good, the Toshiba screen pops up like always, then this black "Windows Error Recovery" screen pops up and gives me 2 options 1) Launch Startup Repair and 2) Start Windows Normally. ive dealt with this issue many times on many computers and either option always gets the computer running, but with this machine whenever i press "Start Windows Normally", the screen with the little wavey Windows flag pops like its loading up for about 15 seconds then the computer automatically restarts to the Toshiba screen. when i click the "Launch Startup Repair" option it shows a small progress bar at the bottom of the screen for about 5 seconds then goes to a completely blank black screen with only the arrow pointer showing and just stays there. ive let it sit for over an hour like that and nothing changes. i did a memory diagnostic check which did nothing. im a novice w comps so i dont know what to do. i lost my backup recovery CD so that wont help. could i download one somewhere? would that fix my problem? im so frustrated.. ive had nothing but problems with this laptop since the day i bought it. but i need it running asap. i greatly appreciate any help!!!

first, don't panic! just kidding
if you have not already made recovery discs then you will have to order them from toshiba. that is, unless we are able to use the hidden partition to restore to out-of-box state. Before that though, you should try a few things as going to out-of-box is going to compeltely wipe everything off of your computer.
turn off computer, then when you turn on, spam (hit once ever second) the f8 key and see if you can get into emergeny boot options menu. If it doesn't go in first try, try at least 4-5 more times as it's all about timing the f8 key. if successful, try to boot into safe mode. if you have made it that far, post back.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Dv9812us Laptop will not startup

I have a Pavilion dv9812us. The problem is that when I turn on the laptop, all of the LEDs (minus the caps LEDs) flash on and the fan kicks on for a sec. Then it turns off. It then repeats this cycle of on and off over until I unplug the AC adapter and remove the battery. This occurs in every combination of powering up (ac+battery, battery only, ac only).
What this tells me is that it is trying to power up, something interrupts the process, so the computer re-tries to boot up after shutting down, but the same error occurs so its a cycle. The error occurs before there is any screen activity. Based on another thread I did tried to reboot the computer without the HD in, but that wasn't the problem.
There had been signs of thing happening before this. The power button would not respond after it went into hibernation. In those instances I would have to remove the battery to get it to turn on. This led me to believe that it was a battery problem at first, but now it seems like a bios or motherboard problem. But, I'm not sure. Is there a fix? Any help would be greatly appreciated.

The 9000 series are prone to graphics problems, see this video
http://www.youtube.com/profile?user=mixcatcom#p/u/58/bnkQNmKauEc
symptoms may include:
Laptop will power and turn on, but no display on screen
When Powered on you can hear fan and blue lights light up but nothing on screen
Cycles on and off by it self however never shows anything on screen
Screen is full of "squiggles" or vertical/horizontal lines
Reboots on its own after a few minutes and repeats this
No power at all however power jack and supply are good
Here is a person who fixes this for a reasonable fee
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260595095107

I just recently added itunes to another pc and now my ipad will not sync on the new pc. It isnt even recognized. What should I do? HELP!!!

I just recently downloaded the newest iTunes and moved all my purchased and already owned music to another PC. Every since I did that I cannot get my iPad 1 to even be recognized in iTunes. I have Authorized the PC in iTunes, but my iPad still will not allow me to sync. I'm at a loss...PLEASE HELP!!!

1. You need to authorize iTunes on the new computer with your Apple ID.
2. Make sure you turn off auto sync in iTunes
3. Connect your iPad to iTunes via USB and when it is recognized, right click on the device from the Device list on the left of your iTunes page and choose transfer purchases.
4. Once purchases are transfered and you have authorized the iTunes account, you should be able to sync.

Mountain lion will not install because time machine uses hard drive for back up. What should I do?

I have downloaded Mountain Lion but it will not allow me to install because the time machine uses the hard drive to back up. How do I solve this problem?

Unless you are trying to install on an external hard drive that actually has been used for Time Machine backups, this is usually caused by having a folder named "Backups.backupd" on your hard drive somewhere. It may be at the root level of the hard drive, but may also be elsewhere. Try searching for it, and then delete it. (You shouldn't need it.)

Late 2013 Macbook Pro Retina 15' will not boot an external disk from a Mid-2012 MAcbook Pro. What should I do?

In order to simplify moving all my files from the previous mid-2012 macbook pro 15' when moving to my new late-2013 macbook pro, i superdup-ed the full hard-disk to an external ssd. Unfortunatelly the new mac resuses to boot from this external disk (i get the grey disk with a line over it). The external disk works just fine so if I boot the new mac from its internal SSD I can read/write the external disk without problems.
Old OS X is 10.9 as is the OS on the new mac.
What I need to do is to boot the new mac from the external ssd, use the same superduper to copy the external content onto the internal ssd.
How can I solve this issue?

Welcome to Apple Support Communities
If you made a backup of your files with SuperDuper, use Migration Assistant (in /Applications/Utilities) to transfer your files from the external drive > http://pondini.org/OSX/MigrateLion.html It will create a new user account with the transferred files, so you may want to merge both user accounts > https://discussions.apple.com/docs/DOC-5472
The Late 2013 MacBook Pro uses a special OS X Mavericks version which makes OS X compatible with it, and older OS X versions do not work with it. That's the reason why you cannot start up from the external drive created from the Mid 2012 MacBook Pro

Amcrest security systems. Iphone6 will not link using pnp. Iphone 4 and 5 both work. Whats the difference?

i have an Amcrest security system. It has a live view feature using PNP. I have successfully connected with an Iphone 4&5 no problems. NOT THE IPHONE6, THE LATEST AND GREATEST. What is the freaking difference?

Have you ever tried to get an answer from them? Why would I need to contact them, their stuff works as it should with the Iphone 4 & 5. Apple changed something. I will email them tomorrow and see what they say. Hopefully they are not like apple and I won't have to make an appointment to see them three days from now in their one store in a city of 1 million people.

Help. My iphone will not charge after some contact with water and it is dead. What do i do?????

My phone made some contact with water but after putting it in rice, it was fine. The only problem was that it had stopped charging and now the battery is dead and I don't know what to do

If you try to have it repaired and it still doesn't work, you'll be out that money and still need to buy a replacement phone. Water damaged phones rarely work well again. I know you're looking for a lower cost option, but spending the money and getting a phone that works 100% seems to be the best option. It's your money and your choice, but I wouldn't try to fix a water damaged phone. Maybe that's just me.........

Laptop will not power on when power button is pressed

I have a Pavilion m6
model: m6-1045dx
Laptop will not power on when I press the power button. It is fully charged. The only light that will come on is the light indicating that it is fully charged. I have tried removing the battery and then putting it back in but that did not work. I use this laptop for college and it is time to go back to school. Please help!

Try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-try power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

G580 Laptop will not boot due to the harddrive some how disconnecting

Hello,
My problem with my G580 is that when I start up there is a sounds coming from the laptop and in the booting device list, the HDD with windows 7 on it which is the main HDD won't show. Pretty sure it is because the HDD somehow disconnected but how much will it cost if I send it in to lenovo to fix it?
Video of when I start it up... https://drive.google.com/file/d/0Bzb6bwEsdb02cS1RV05aTkVSbUU/edit?usp=sharing

Hi Brandon,
Welcome to Lenovo Community!
I’m sorry to hear that your G580 Laptop is not detecting the HDD (Hard Disk Drive) and not booting to Windows. I would suggest you to perform the BIOS reset once and check if the HDD is detected in BIOS, below are the steps for the same:
To access BIOS menu press F2 when the Lenovo logo appears on the screen while the computer is starting up.
Then to reset the BIOS to its defaults click on “F9” Key and select YES.
Now click on “F10” Key to save the changes that are done in BIOS, the computer should automatically restart. Please check if the issue persists.
If the issue persists even after performing BIOS reset, I would suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed and for information about repair cost.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

A135-S2276 laptop will not power up

This laptop will not power up. The green power light will light for a second then shut down. Reseated the memory, trieed new memory. The hard drive tested OK. Removed power adapter and battery, held power switch for 10 seconds. Tried without battery. The one time it did power up just kept beeping. Any suggestions?
TIA
Tim

Phone HP Support for warranty service. If you are in US or Canada:
http://www8.hp.com/ca/en/contact-hp/phone-assist.html
If you live in another part of the world, start here>>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My macbook pro will not startup, startup disc is full

my macbook pro will not startup, startup disc is full

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
If you are no longer able to boot your computer, then the drive is too full and has become corrupted. You may be able to repair it using Disk Utility on your Installer DVD:
Repair the Hard Drive and Permissions
Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this doesn't work, then you will have to erase the drive and install OS X from scratch. From the Tiger installer disc you will choose the Erase and Install install option.

Satelite pro L350=S1701 Laptop will not load (VISTA32)

My laptop will not load whatsoever , an initial shutdown might be to blame.
The message on screen suggests that the system registry is missing or corrupted.
In addition,its showing Status: 0XC00000E9    and File: \windows\system32\config\system
The screen message is asking to use the  Windows installation disc ,and then use the repair mode, but I cannot find this disc.

Status: 0XC00000E9    and File: \windows\system32\config\system
The System hive supplies an important branch of your registry. If you haven't yet, try Last Known Good Configuration on that menu to use a previous version
   Using Last Known Good Configuration
Otherwise, try this.
On the Advanced Boot Options menu, choose Repair Your Computer.
When you reach the System Recovery Options menu, choose Startup Repair.
If that doesn't do the trick, go back to the System Recovery Options menu and do a System Restore.
Let us know how it goes.
-Jerry

Toshiba model# PSC2EU-05400L will not startup

I have a one year old Toshiba laptop that will not startup. Battery is good, power supply is good. green LED is on left front of laptop.. No fan noise, screen stays black. laptop has only been turned on maybe ten times. Unfortunately it is just out of warranty.
I don't think my next machine will be a Toshiba if this is not an easy fix.

schlip76 wrote:
I have a one year old Toshiba laptop that will not startup. Battery is good, power supply is good. green LED is on left front of laptop.. No fan noise, screen stays black. laptop has only been turned on maybe ten times. Unfortunately it is just out of warranty.
I don't think my next machine will be a Toshiba if this is not an easy fix.
If you truely do not hear the fan come on (and you should) or the hard drive (again, you should) when you boot up, and only the green power light is on, then I would think it may be either a power issue or a thermal issue (leaning toward former). thermal issue usually the computer comes on, then immediately shuts off.
have you tried taking the battery out and holding down the power button for 20-30 seconds, then reinstall battery. try to boot up. If this doesn't work, try taking the battery out and just booting up with the power adapter plugged in. If that doesn't work just try battery alone. Post back
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

My laptop will not startup I did a diagnostic check and it detectef no problems what should I do?

Similar Messages

Maybe you are looking for