My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram and still not working. Message on black monitor says"check signal cable...?

My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram per the instructions I received at the MAC store and the monitor is still not working. Message on blacked out monitor says"check signal cable". All cables are attached and monitor and MAC are both plugged into power source...Help ?

Go to System Preferences, Display. Click on dectect displays.

Similar Messages

Ever since I updated my OS, the screen on my Mac will automatically become huge if I keep my mouse on the screen. I can't figure out how to return the screen to a normal size. Any help?

Ever since I updated my OS, the screen on my Mac will automatically become huge if I keep my mouse on the screen. I can't figure out how to return the screen to a normal size. Any help?

Hold down the 'ctrl' key and scroll backwards on the mouse.
Then go to System Preferences > Universal Access > Seeing. Turn off the Zoom feature.
Similarly in Sys Pref > Mouse uncheck the box for 'Zoom using scroll wheel…'
If it still occurs after that there may be a corrupt .plist file.

I have a MBP version 10.6.8 and about 2 inches on the right side of the screen is flashing white lines. Is there anything I can do to fix it? And if not how much will it cost to fix?

I have not dropped my computer or anything, but all of a sudden the screen got all messed up. It helped to move the screen back a little bit, but now for it to go away I have to hold the screen. I tried resetting the PRAM, safe boot, repair disk utility, etc. Unfortunately, I do not have applecare. The computer is only 2 years old. Thanks for any help.

The screen is broken. Take it to an Apple Store to fix that

CUSTOM ICC PROFILES DO NOT SHOW UP IN PSCS 6 MAC OS 10.8.4 BUT ARE OK IN CS5

The only icc profiles that show up in CS 6 Mac OS 10.8.4 are the ones that are installed from the printer driver ( Epson 9900 ) Any other single or custom profiles do not show up when placed Library/Colorsync/Profiles
All profiles show up in CS 5, There has been a lot of discussion of this on many forums with no solution. I have also tried installing the profiles in the contents folder of the Epson printer in the main library folder with no luck. Please advise

Mac OS 10.8.4 is still in beta. You need to be reporting this to Apple.
What happens if you move these profiles to the Adobe/Profiles folder, or the users/Library/Colorsync/Profiles folder?
There has been a lot of discussion of this on many forums with no solution.
What forums? A google search turns up nothing but this thread.
I have not seen this problem with the released versions of 10.8.

I have 2 Apple TV's in my home. When I attempt to login, is say cannot connect to the internet. I have reset both Apple TV's and also restarted them both.but still cannot connect to the internet. I al reset my router and still not change

I have 2 Apple TV's in my home. One is 2nd Generation and the other is 3rd Generation. One one that is 2nd Gen cannot connect to the internet. First I restarted, the I rest it and I even changed the password. still no connection. So I purchased the 3rd Gen TV and I have to same problem, but they are in different rooms. Before I had no problem with my 2nd Gen TV, but then one day it did not connect. I even had my internet provider come and check my internet and it worked ok, but no connection with the Apple TV. I have tried everything but no results. Somebody please help me.
Regards,
Richard

Hi richardwilliams51,
If you are having difficulty connecting to the Internet using your Apple TV, I would suggest troubleshooting using the steps in this article -
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
If that does not completely fix your Apple TV, you may need to restore it, using this article -
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Thanks for using Apple Support Communities.
Best,
Brett L

For some reason my icons are not showing up in my bookmarks, those help so much when you are looking for a link quickly. So annoying not to have them. Any solutions?

many sites have icons showing just before the web site address, those used to show up in the bookmarks but they don't any more, why? Can it be fixed?

Hi charli2k,
You should take a look at [https://support.mozilla.org/en-US/kb/latest-firefox-issues#os=mac&browser=fx9 this article] that discusses some of the issues with the latest build of Firefox.
There is some information in there that should help you to resolve your issue. Luckily, it is a very easy fix.
Hopefully this helps!

I've accidentally apparently put my iPod Touch 4th Gen into Recovery Mode. I have not jailbroken. When I plug it in to my Windows 7 computer, it says that all values are n/a. I tried restoring and I got error message 2005. It won't turn on. How do I?

As the title says. Please, help me, I'm a little worried. Is it possible that I have somehow bricked my iPod?
EDIT: My iTunes is not up to date, I updated it last the week iOS 5 came out, it tells me that there's a new update. Could I need this update to restore to iOS 5.0.1 from my PC? Because I just did OTA to get to 5.0.1.

Never mind, got it to work. I stumbled around on Google for a while and somehow ended up reading things from the 'jailbroken' community. They had easy instructions to get out of Recovery mode. Thanks anyway though!
P.S. For anyone who experiences this, here is the fix: Hold Power and Home in unison for 6 seconds, then power on as normal.

What cause Macbook Air A1237 time and date always return from an older date when it restarts? I have tried to reset its PRAM and still it has the same issue.

So here is the story,
1. First, this Macbook Air A1237 always display the wrong date and time every time I open it after shutdown.
2. The Battery always in zero percent and not charging at all.and the magsafe always in color orange.
*also the battery displays the colored black plug that states it was plug in using the power cord.
I need help on how to fix this issues.I'm hoping for your kind assistance.
Grazie Mille!
Ciao Ciao!
Regards,
Freddierick Llarina

Hi,
Had similar issue with the same model. It works with power adapter plugged in, but not with battery alone.
You need to get the battery replaced.
Cheers,
Clarence

My new iPhone 5 has stopped connecting to wifi whilst all my other devices connect fine. I have reset network settings and still not connecting via wifi or 3g

iPhone 4 has stopped connecting to Internet on wifi and 3G . Resetting network settings did not fix problem Help please

Howdy TrumpetCharlie,
We've an article that can help get your WiFi working normally again.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Allen

MacAir not detecting external monitor. 'check signal cable' error

Brand new MacAir OX 10.7.4 not detecting samsung external monitor. I keep getting 'check signal cable' error on a blank screen.

Hi Walter,
I'm not sure this'll fix your problem, & it's info from earlier OSX versions, but I'll toss it out...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
Trash these files...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.windowserver.<12digitHex#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist
There may be more than one of each of the above, then trash...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
Reboot
You could test it by first, depending on OS version...
To find out if it's system wide or user specific, try this...
Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?

"check signal cable" screen saver

I was enjoying my Mac-Mini with a third party monitor, that seemed to work well together, but the only problem with it was that the OSD always came up. So I bought a new monitor (LG E1940). I've first tested it with the previous monitors VGA cable, and as soon I connected the monitor with that cable, the typical "check signal cable" message disappeared, regardless the cable other ends was not yet connected. Regardless the monitor proved to be working with the Mac-Mini.
When I replaced with the slim one that is shipped with (because the other is a bulky cable, and the manufacturer made the connector stick right out in to the wall) the "check signal cable" message still present, after I plugged both end of the cable. At first I was surprised, and despite the message, I booted up the system, and the monitor works. But every time, the system does not sends any signal, the "check signal cable" message comes up.
Then I checked it on my (non-apple) laptop, and right after I connected both ends of the cable, one in the laptop, the "check signal cable" went away.
I'm using a mini-DVI to VGA adapter shipped with my Mac (for the Mac), and I'm suspecting that it is a defect in that adapter. Or this is the normal behavior?

Does the Mac mini (Late 2009) supports the VESA Display Power Management Signaling (I learned about it right now,) through the mini-DVI to VGA adapter?

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I keep getting 'check signal cable; on Samsung tv when connecting macbook using HDMI cable

Please help, I want to connect my laptop to my Samsung plasma TV. I am using a mini display port to hdmi adapter and then a hdmi cable to the tv. It keeps showing a 'check signal cable' error message.
I have tried another HDMI cable (which works on another device) but it still does not work.
Hep please
Thanks

OK, OK, I think I've solved it. Once again, I'm no techie but I hate not solving a problem, so I dug deeper,learned Korean last night and found thid solution - it's free and takes one minute.
As I thought originally, the problem stems from the Samsung expecting a TV signal in the HDMI port so you have to tell it it's a computer signal.
Go from the Mac HDMI socket to the Monitor HDMI socket with an HDMI cable.
Go to the Samsung input/source button on the remote and on that screen select tools.
Select 'edit name'
Scroll down to PC and press enter. It should now read HDMI - PC
Under apple 'system prefs - displays, select your monitor pref - mine is 1080p
and... BINGO, it should work.
If it works for you guys, I accept gifts of beer and public praise with no problem.

Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000 photos not showing up. What happened?! Where did all my photos go?!

I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000 photos not showing up. What happened?! Where did all my photos go?!

WOOHOO!!! i finaly fixed the problem. Here is what to do:
Chances are if you did the same thing as me you either have
A) No album names at all for ALL your songs in your library
or
B) Have the same name for every album for ALL your songs in your library.
Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
For some reason having the same album name for all your songs messes up the organization of the iPod.
Hope this helps anyone else that is having the same problem

Hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram and still not working. Message on black monitor says"check signal cable...?

Similar Messages

Maybe you are looking for