My laxmark wifi printer and iPad2 can't get married, what to do?

My laxmark wifi printer and iPad2 can't get married, what to do?

Is it one of the Lexmark printers that support AirPrint ? Those that do support it are listed on this page - there is also a bit of troubleshooting on that page. If it's not an AirPrint printer then have Lexmark got an app that supports your model ? If they haven't then there are third-party printer apps such as Print Central For iPad and Print n Share which might work with it.

Similar Messages

  • I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.

    I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.  I can manually send and receive faxes but I can not do it through the computer. 

    Try deleting the printer, deleting the job queue and reinstalling the printer again.

  • I have a  ipad 64GB Wifi 3G and i can not get onto the internet, i have  set up wifi but it wont get on the net

    i have a  ipad 64GB Wifi 3G and i can not get onto the internet, i dont have a data plan yet & i have  set up wifi but it wont conect to the internet

    From your description above I conclude that the WiFi transmitter and receiver of your iPad appear to be working, but I abviously cannot tell how well they are working.
    Have you reset your iPad already?
    Press the Home and sleep/wake buttons simultaneously until only the white Apple logo appears on the screen - usually 10 to 15 seconds - ignore anything else.
    Genius Bar: http://www.apple.com/retail/geniusbar/

  • I have a hp photosmart D110 printer and I can't get it to print. It will not connect to my wireless

    please help me get my printer to print and connectto my wireless

    Wnat router?
    What operating system? 
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a epson wifi printer and I can't print only my photos and

    I have a epson wifi printer styliusnx330 and I can only print my documents or photos otherwise I can't print anything else

    Other than documents and photos... what else is there to print?

  • I have a LaserJet 5L printer and I can't get it running properly under 10.5.8 while it works fine under 10.4.11. It only prints the first document and then shows the queue and prints slow like ****, it says so, but nothing printed after30 minuts.

    Hi.
    I have problems to get my Laser Jet 5L running properly under 10.5.8. I prints the first page/document and then it says1,36 % printed than printing but nothing happens. Under 10.4.11 everything works fine, sometimes I have to get the print jobs running again,but then it works.
    I have the Laser Jet 5L connected via USB to parallel.
    I am running a PowerBook G4 1,67 GHz and 2 GByte RAM.
    Best regards
    LasertJet5LApple

    Hello, since nobody has piped in yet...
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x
    1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2. Choose System Preferences from the Apple menu.
    3. Choose Print & Fax from the View menu.
    4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • I have a Office Jet Pro 8500 printer and I can not get it to print 8x11 pictures keep getting 4x6.

    Have all setting set for 8x11 paper and on final I only get picture to fill 1/4 of sheet. What needs to done to get full 8x11 prints

    Hello mariamac80,
    It sounds like you cannot print from your network printer on your MacBook. Printer issues can be a but tough to nail down, but I would recommend trying the troubleshooting in this article named:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Everytime when I get emails from my gmail account. I end up getting 2 emails one from the email app and one from gmail app. Also I have my wifi off and I can't get 4G LTE

    Any suggestions please and thank you

    Fix number one: turn one of the Gmail applications off. Then it will come to just one app.
    Fix number two: You must turn on cellular data/LTE on your device to access your 4G LTE or turn off your WiFi to use cellular data.
    Good Luck

  • I updated Pages, and I can't get the "What's New in Pages" splash screen to go away.

    The "Continue" at the bottom is useless. *** Apple?

    Just close the app and relaunch it or close the app and reboot if closing alone doesn't work,
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Pages app and then swipe "up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    My iPhone will
    not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    Try resetting your network settings.
    Settings>Genenal>Reset>Reset Network Settings.

  • I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

    i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

    Care to share which OS you are using?

  • Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

    Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected.  Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices.  After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected.  Just can't seem to get it to generate an IP.  Any solutions other than turning it on and off again?  Not a Merry Christmas morning.

    Ok, so, a couple of things:  Denisefromwaleska and I have the exact same size/type/color iPod.  Now wishing I'd bought the black one maybe...
    Second, Airport is an Express and I have a second one that I carry with me when I travel.  Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem.  Updated firmware on my travel router, still could not connect to the internet.  Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod. 
    Thanks again for all your help, hopefully I can get a solution in place soon,

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • My acrobat printer uninstalled itself and I can't get it back working...How do I fix it???

    My acrobat printer uninstalled itself and I can't get it back working...How do I fix it???

    Hi edhones,
    Please update Acrobat to v11.0.09 and check.
    You might want to repair Acrobat from the 'Help' menu and check if it installs the pdf printer back or not.
    Regards,
    Rave

  • TS4002 Can´t configure secondary e-mail. That is I have the icloud account and earlier bought an account för my wife. Now she can´t get it to work. Where the h--l do I configure this?

    Can´t configure secondary e-mail. That is I have the icloud account and earlier bought an account för my wife. Now she can´t get it to work. Where the h--l do I configure this?

    Welcome to the Apple community.
    If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

Maybe you are looking for