My led flash for alerts is not working in ios 8.3 . what to do now ?

i updated it last night and the led is not working till now .

gave up on flash player 15 - installed flash player 11 .msi package - works straight away.
http://dwaves.de/index.php/2014/11/11/install-flash-player-11-on-windows-8-embedded/

Similar Messages

Led Flash for Alerts not working.

iOS5 - Accessibility - LED Flash for Alerts turned on.
But LED does not flash when phone call coming in.
Anyone has the same problem. How to fix it?

G Lam wrote:
I seem to have found out the problem.
It works this way. It the LED flash alert is already set to on, turn it off, then press the home button to return to home screen. Then go to setting and turn it on again.
It should work. The LED will flash only when your your phone is locked or asleep.
But however, if you somehow have turned your phone off, reset it or its battery runs out, it won't work again. You then have to redo the turn off and on process again for it to work.
This is true even after I have updated to 5.0.1 yesterday.
This is definitely a bug.
Apple, please look into this too while you are working with the battery issue.
Thanks for your tip on making this LED work as an alert. It's too bad it does not work when the vibe/ring button is set to vibe.

Flash for Photo Booth not working. Can it be fixed?

My flash in Photo Booth stopped working--can it be fixed? And if so, can a local computer store do it?

Apple doesn't fix phones, they replace them. Bring your phone and $199 to Apple for an out of warranty replacement. Damage to the camera by the excessive heat has voided your warranty.

Autocorrection for every keyboard not working in iOS 6

Apple promised at WWDC "Autocorrection for every keyboard". I am using a Bluetooth keyboard on an iPad 2 with iOS 6 and it's not working. The same is true on iPhone 5. I have it enabled in settings and it works with the virtual keyboard.

I have an iPhone 4 with current iOS.
I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
Just wondering if this common among iPhone 4 users.

Setting different vibrations for contacts is not working in iOS 7. Thoughts?

Setting a different vibration alert for a variety of contacts "appears" to be working; the settings are accepted and visible, however, when an incoming text arrives, they all vibe the same - not differentiated. <shrug>. Using iphone 4S / iOS7

Works fine for me on my iPad and iPhone.
Did you turn it on on the iPad?
Settings-videos-homesharing

Led flash alerts not working in iOS 5

I have turned on led flash notification on and nothing happens when I get phone calls, text, e-mail etc. I have turned off the led setting and then turned it off the phone. I then restarted it and turned the setting back on and nothing happens. The light never goes off. I checked the light and it works fine. Any ideas on how to fix this?

   For Everybody Who's Having Issues With The LED FLASHING ALERT On The iPhone 4S, I May Have Promising News For You.
   I Just Spent The Last Hour Or So With An Apple Support Tech, Who Then Forwarded Me To A Senior Support Person. I E-Mailed Her This Link So That She Could Research This Issue.
   Long Story Short, We Eventually Went Into The Settings - General - Reset - & Reset All Settings. 3 Minutes Later Tops, I Went Back Into The Settings - General - Accessibility, & Then Turned The LED FLASH FOR ALERTS Option ON. Tested It, & IT WORKED!!!!!!!!
   Tested It A Couple of More Times & It Still Works!
   I WANT TO THANK THE INCREDIBLY PATIENT APPLE SUPPORT STAFF, FOR AN AWESOME JOB!!!!
   The Senior Support Tech Also Requested That I Relay To All Apple Product User That Their Techs Do NOT Monitor Their Support Discussions. Sooooo, If Your Having Issues With Your Apple Product, Call 1-800-MYAPPLE, & They Will Do Their Best To Assist You With Your Problem. AND I Am Not Affiliated With Apple In Any Way. I'm In Law Enforcement!

Alert is not working for a library

Hi,
Alert is not working for one library in a site collection only. For others it is working fine. So, we have taken the template of the library and created a new library and tested there, alerts are working fine also.
So any idea what can be the issue?

Hi
Try troubleshooting using the link
http://blogs.technet.com/b/steve_chen/archive/2009/11/20/alerts-in-sharepoint-troubleshooting-moss-wss.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Alerts are not working for Site collections in a content database

Hi,
We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
or changes happen in the list/document library.
We have tried with Immediate as well as scheduled alerts both are not working.
FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
Any help would be appreciated.
Thanks
Ramkumar

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

Alert configuration Not working in RWB

Hi,
In RWB alertconfiguration is not working, showing the error
<b>404 Not Found</b>". I gone through this thread
Alert configuration or Alert Inbox-----404 Not Found
And my host name is full host name.
In exchange profiles my port is 50100 (J2EE PORT) (Not Changed)
1. In SMICM when I changed to port to 50100 (J2EE) then alert configuration
working, But My scenarios not working throwing error : System Error.
<b>Error Category XI_J2EE_MESSAGING_SYSTEM
Error Code HTTP_TRANSMISSION_ERROR</b>
2. In SMICM when I changed to port to 8001 (ABAP Port) then Alert configuration not working (Error : 404 Not Found), but my scenarios were working fine.
what would be the reason?
thx in advance,
Ansar.

HI,
If Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs.
Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination
Also see the below links
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
Regards
Chilla

Flash Player 11 not working with IE 9. What am I missing?

Flash Player 11 not working with IE 9. What am I missing??

Hi Hitomi,
Yayyyy! found it, downloaded 11.7 and it works on both Second Life media players and websites.
Thanks so much for your help sderik

Trace & Alert is not working

Dear Friends,
iam using snackr open source to evaluate and learn flex. i
know Flash3 & AIR very well. iam New to Flex.iam trying to use
trace or alert.show command in order to debug the coding. it is not
giving out put. even it is not going to that line. i read the help
file and searching for mm.cfg to edit and fix enabletrace =1.
pls help me..
Thanks and Regards,
Syed Abdul Rahim

Dear Mr.Rushme,
Thks for your reply, as u said, i creeated a folder called
c:\user\syed.rahim\mm.cfg, and run the following code, i want to
find the saving path of the file, i mean application storage
i.e. trace(docRoot.nativePath);
Alert.show(docRoot.nativePath);
in some case i want to use trace for debugging, like certain
function is getting fire or not? but the trace or alert is not
working, basically i want to display a message and debug..
code is:
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
applicationComplete="handleApplicationComplete(event)"
frameRate="60"
visible="false"
autoExit="true">
<mx:Style source="styles/styles.css"/>
<mx:Script>
<![CDATA[
import ui.utils.UIUtils;
import model.logger.Logger;
import model.feeds.FeedModel;
import model.options.OptionsModel;
import ui.windows.SnackrMainWindow;
import mx.controls.Alert;
* Name of the database where we store all feeds and options.
This file
* is within the user's documents folder in the Snackr
subfolder.
static private const DB_FILE: String = "FeedDatabase.sql";
private var _mainWindow: SnackrMainWindow = null;
private function handleApplicationComplete(event: Event):
void {
// Create the Snackr data folder if it doesn't exist (inside
the user's
// document's folder).
var docRoot: File =
File.documentsDirectory.resolvePath(UIUtils.appName);
docRoot.createDirectory();
trace(docRoot.nativePath);
Alert.show(docRoot.nativePath);
// Initialize the logger. The logger writes to the file
Log.txt in the
// Snackr data folder. We keep the previous 3 log files
around.
var oldLogFile: File;
for (var i: int = 2; i >= 0; i--) {
oldLogFile = docRoot.resolvePath("Log" + (i == 0 ? "" :
String(i)) + ".txt");
if (oldLogFile.exists) {
try {
oldLogFile.moveTo(docRoot.resolvePath("Log" + String(i+1) +
".txt"), true);
catch (e: Error) {
// Too early to log this. Oh well. It just means that we
won't be preserving
// log files earlier than the current one.
trace("Can't back up log file " + oldLogFile.name);
Logger.instance.initialize(docRoot.resolvePath("Log.txt"));
Logger.instance.log("Snackr starting");
// Open the Snackr database file and initialize the models
from it.
var feedModel: FeedModel = null;
var optionsModel: OptionsModel = null;
var sqlConnection: SQLConnection = null;
var dbFile: File = docRoot.resolvePath(DB_FILE);
try {
sqlConnection = new SQLConnection();
sqlConnection.open(dbFile);
sqlConnection.compact();
optionsModel = new OptionsModel(sqlConnection);
feedModel = new FeedModel(sqlConnection);
catch (error: SQLError) {
Logger.instance.log("Couldn't read or create the database
file: " + error.details, Logger.SEVERITY_SERIOUS);
throw error;
_mainWindow = new SnackrMainWindow();
_mainWindow.initializeModels(sqlConnection, feedModel,
optionsModel);
var showInTaskbar: String =
optionsModel.getValue(OptionsModel.OPTION_SHOW_IN_TASKBAR);
if (showInTaskbar == "0") {
_mainWindow.type = "lightweight";
else {
_mainWindow.type = "normal";
_mainWindow.open();
]]>
</mx:Script>
</mx:Application>
Thanks and Regards,
Syed Abdul Rahim

Camera flash of iphone 4s not working

Camera flash of iphone is not working can not take a picture with flash??
Please suggest a solution.

If you bring up the shortcut bar from the button of the screen by swiping upwards, can you switch the torch function on and off?
Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
You will not lose data by resetting.
Did you make sure that the flash is activated in the camera app? Did you try to switch it off, take a photo and switch it back on again?
To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the camera. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

Ical alerts are not working on Lion

I've got a problem with the new ical on Lion: alerts are not working. Any clues?
(The "turn off all alerts" is unchecked )

Same problem, alerts are not being triggered. I am getting fast and perfect syncronizing between iCal, MobileMe Cal, and iPhone. But alerts are not happening consistantly.
Unreliable notification is a big problem.
I looked in my user preferences as noted by "xbarn" but there's no iCal login item. Can't imagine that iCal would need to be running for events to activate, since they are syncing correctly without iCal open.

Iphone 4 Alerts Tones Not Working / Ringer Is WORKING KINDLY REPLY ME

HI , PLEASE HELP ME I WANT TO FIX THIS ISSUE THAT I AM GETTING PLEASE HELP
MY ISSUE IS IPHONE 4 ALERTS TONES NOT WORKING AND CALL RINGER IS WORKING.. PLEASE HELP ME!

If the iPhone came from the US then it is locked to AT&T. To unlock an iPhone the original carrier is the only one who can unlock the iPhone and AT&T will not unlock iPhones. So there is not official way to unlock the iPhone 4.
At this point there is no way to hack the iPhone 4 running 4.2.1 to unlock it either so the phone and messaging apps will never work. You basically have an iPod touch.

My led flash for alerts is not working in ios 8.3 . what to do now ?

Similar Messages

Maybe you are looking for