My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset. It was working fine until I went to activate it and update the PRL. It turns on, but Freezes on the LG Logo. it currently goes into the LG Download Mode, and When I restore with LG's Mobile Support Tool, It finishes, reboots, and stays at the boot Logo. I was wondering if I can possibly get a replacement phone? This is a little upsetting, as i was hoping to have it transfered from prepaid to postpaid service next month

Who is your Internet Service Provider...?
Do you have any computer which is able to go online wirelessly...?
Have you forwarded any ports on the router...?
Try to adjust the wireless settings on the router and check...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Also,for the gaming system,check this link.

Similar Messages

  • Where does downloaded software go and how can I access it and install it?

    Often when I try to download and install software, a dialoge box comes up telling me that my only option is to save the software upon downloading. After it completes the download, I have absolutely no idea where the software has gone or how to access it so I can install it!
    First, I'd like to know where my downloaded software goes so I can install the things I need to install. Second, is there a way that I can change the settings for downloads so that things don't go to a mysterious location, unbeknownst to me? If I'm downloading something, that means I want to install it 99.9% of the time right then and there!
    Thank you,
    Andrea

    Open the Downloads window - {Ctrl + J} - and right-click the file that was downloaded, select '''Open Containing Folder'''. Your downloaded file is there.

  • All of my computers have had hard drive issues and I can't authorize the new hard drive.  What can I do?

    I have itunes on 5 of by 8 computers and 6 of the 8 had hard drive issues.
    I was unable to deauthorize any of the computers and now I can't watch or listen to any of the tings I've purchased from the iTunes store.
    Help
    Tsuki56

    Can you not deauthorize all?

  • I recently took my 27 in i mac to peach mac for service for a flashing green screen. They said it was not a hardware issue but a software issue and want to charge me 99.00 to re-install it. WiIll mac come out with a patch for OS x for this?

    I recently took my 27 in I Mac to Peach Mac for service for a flashing green screen. It comes up when I log in.  They said it was not a hardware issue but a software issue and want to charge me 99.00 to re-install it. WiIll mac come out with a patch for OS x for this? Is this worth it?

    Having a similar issue with my MacBook Pro w/Retina 2012.
    I did the reinstall my self and incrementally did the updates by downloading them from Apple's website instead of using the App Store.
    I found that the problem occured after updating to OS X 10.9.3.
    The issue is in a 4k resolution update for mirroring displays.  Not that you should be doing that from an iMac but your packaged update may have been similar even though the update was meant for 2013 MacBook Pro's.
    You can try reseting the Nvram chip during boot up by pressing "Option + P + R" keys.  You may have to do this after entering your password to log in if you have that set up on your computer.  However this only works on certain models of Mac hardware and may not do anything at all.
    After you get your second opinion from Apple, if they again confirm it's a software issue, then you should reinstall OS X Mavericks and download updates from the website instead of the app store.  This way you control your updates.  You will find the OS X 10.9.2 update as well as a seperate security update prior to the released update of the dreaded OS X 10.9.3
    Again if you don't want the issue to occur again, then hold off on updating to OS X 10.9.3, but be cautioned that you do so at the risk of leaving your computer less secured even though it will seem to run better.

  • Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix.  The edited image appears back in lightroom in a new folder.

    Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix.  The edited image appears back in lightroom in a new folder.

    I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows:  Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
    Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
    *** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
    Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
    Thanks for the help, dj_paige.

  • I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

    I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

    Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"

  • I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?

    I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?
    It is not showing on the Desktop or the left colomn of Finder (Set to do both in Finder Prefernces) and is not showing up under the Disk application under Utilities (Sorry can't remember the name off the top of my head!)

    cjz0r wrote:
     ...I'm starting to think it is most likely NTFS, am I looking at needing an Application to read the NTFS partitions on the drive?
    You should be able to read NTFS formatted drives, just not write to them. For that matter, USB Flash drives generally come formatted NTFS for use with PC's and they have to be able to mount on a Mac in order to reformat them for Mac use. The Windows utilities supplied on those Flash drives will be deleted when the drive is reformatted for Mac use so I routinely copy them to the Mac desktop first before reformatting.
    You might look into something like this http://eshop.macsales.com/item/NewerTech/U3NVSPATA/ if the enclosure is an issue. It looks weird but it works.

  • Can I exchange for a new laptop? Since December it has been having hardware issues and it has already needed to get parts changed twice already. My laptop is not working properly again. I feel like I have unfortunately gotten a lemon laptop.

    Can I exchange for a new laptop? Since December it has been having hardware issues and it has already needed to get parts changed twice already. My laptop is not working properly again. I feel like I have unfortunately gotten a lemon laptop.

    Apple will repair or replace at its discretions, parts found to be defective in materials or workmanship.
    You will have to discuss whether your history warrants a complete replacement with the folks at the Genius Bar.
    I do not speak for Apple, but it sounds to me like you have been unlucky, but not unlucky enough (or have spent so much time with your MacBook in the shop) to warrant a complete replacement.
    You have not provided any details of what the faults were or what was replaced. If they replaced the motherboard, you already got a new computer -- because everything except the drive and the display is on that board.

  • HT4528 i am having problems since downloading ios8.  app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id.  Anyone else having these issues?  i did not download the update

    i am having problems since downloading ios8.  app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id.  Anyone else having these issues?  i did not download the update

    No.  But thank for asking.

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • Safari Error:cannot connect to server.Was able to click on all tabs within website many times,no issues.Now can't access the"shop" tab within website-What do I do Now?

    Safari and/or internet question:
    I have MacDeskTop W/Intel/OS X Lion 10.8.2   and Safari:Ver6.0.2(8536.26.17)
    Currently I am having a big issue to access within this website's the "SHOP section(tab)" I ca click on the tabs and read the info in each section, except for the "Shop" Tab.
    While in the process of paying for my items in my cart, I received a website message saying something
    To the affect that this website is being updated. Your items in your cart will be in your cart.
    Then the website's screen kicked me out the door.
    A few days later I accessed the main page of this website with no problem.
    I can read the information on the main web page pertaining to items I need to purchase, etc., with no problems.
    I click and maneuver from on one tab to another from the main page within this website with no issues.
    When I click on the "SHOP section(tab)" within this website to complete my purchase.
    Part of this website an error occurs on this "SHOP tab".
    "Safari can't connect to the server".
    Safari can't open the page "https://and the name of this website" because Safari can't connect to the server "www.the name of this website".
    I click on the reload from the view of the toolbar and I can't access this website's"Shop section(tab) at all.
    I e-mailed the webmaster of this website a few times, but no response.
    In the past I was able to access the "Shop section(tab") within this website many times to purchase items with no issues.
    Now I am at my wits end as I really need to complete my purchase from this website.
    I cannot purchase these items from other websites. Only this website.
    So, I really need anyone's tech expertise to help me access the "SHOP" tab within this website.
    I also have another website that i have visited numerous times within the last 6 months with no issues.
    Now I can't access this website at all.
    Safari error: "Safari can't connect to the server".
    I can't figure this out
    No issues with:
    * Comcast tech says that My modem, Wi-Fi connections are fine.
    * Cables and wires and Power strip unit to protect my electronics are fine
    * Utility bill is up to date.
    I have a Mac Desktop 23 inch screen (Purchased 01-01-2013)
                                                      Lion: OS X
                                                      Version 10.8.2
                                                      Processor: 2.7 GHz Intel Core i5
                                                      Memory: 8 GB 1600 MHz  DDR3
    I use Safari: Version 6.0.2 (8536.26.17)
    I use the Mail app that shows a postage stamp with the picture of an eagle 
                                                      It is the Version 6.2 (1499)
    I really need help access the "Shop section(tab)" of the website to complete my purchase.
    What is the next step to fix my dilemma?
    Thank-you all in advance with your expertise, and patience.
    Very Much Appreciated.
    With Kindest Regards
    Mac Desktop, OS X Mountain Lion (10.8), Safari: Version 6.0.2 (8536.26.17)

    Hi There Linc Davis,
    Wow, you are the best.
    Yip this is what the website looks like. Great job Linc Davis.
    Not surprised that the "Shop" tab is missing. Darn.
    Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
    Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
    Please Linc Davis

  • My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

    My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls  urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

    Hi there,
    Use the method described in the link below to get back up and running:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

    With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • Reload Software: 552 AND computer can't connect

    I've been at this trying to fix my phone for 2 days and still nothing.  I installed an app that didn't work (it came up with an error) so I uninstalled it.  I told it to reboot later and then later did a battery pull.  After that, it came on and said "Reload Software: 552" and I can't get it to reload the software.
    I think it has something to do with the drivers.  I have Vista.  It was barely detecting it at first, and when I tried to reinstall it it would always mess up somewhere in the process.  I tried with the battery both in and out.  However, after resetting or when the battery was out, Windows told me it was installing the software driver.  So I thought that I should re-install Desktop Manager.  I redownloaded it, and clicked repair (Maybe I should try "Uninstall," make sure the drivers are deleted, and reinstall it?) and then after that it couldn't detect it at all.  I directed Windows to install driviers directly from C:\Program Files\Common Files\Research In Motion\USB Drivers and it told me "Windows cannot install this because another process is using the file."  I copied the drivers to my flash drive and had it install from there, and it did the same thing without even reading my flash drive so I suspect it's a Windows configuration file that is in use.  So I tried the same thing in Safe Mode, even opened the Task Manager and ended a few processes that don't crash my computer upon doing so, and still it said that.
    Oh, and the AppLoader program doesn't work either.  The device box is blank and the check box to scan for devices is grayed out no matter what I do.  Even installing Desktop Manager using WINE for Linux doesn't work.
    So I am completely out of alternatives.  Any idea what I should do?

    Wow... so it's not just me?
    Paco, I'm on the THIRD phone that has done this. I've been on these forums looking for help.
    But I'm seeing something I hadn't seen before: someone else who: added a program and removed it... .is running Windows Vista (I'm using SP2)..... and the machine will NOT recognize the phone when the reload is attempted!
    I have no answer for you (yet). I'm pretty upset with my carrer (T-mobile).... Why, with all the people I had to tell of my issue, does NO ONE see this as a problem? (Um.. Ma'am.. have you recently loaded a program? Which one(s)?)
    If we can find a resolution, I would rather go back to my 8220! I am not so happy with this 8520!
    Pax,
    GFApryl
    Detroit

  • I tried to update the software overnight, and it was still in the beginning stages of the progress bar when I woke up.  When I restarted the process I have to restore the phone, its again stuck in the beginning of the process. Does anyone know how long th

    I tried to update the software overnight, and it was still in the beginning stages of the progress bar when I woke up.  When I restarted the process I have to restore the phone, its again stuck in the beginning of the process. Does anyone know how long this should take?  The beginning sections seemed to fly by.

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

Maybe you are looking for

  • Can I use more than one type of iPod on my computer?

    Hello! I just purchased the iPod 80GB but I also have the second generation shuffle. My husband now wants the shuffle. With there be any problems with setting up my new iPod in regards to over-riding anything my shuffle has on it? Can I use two diffe

  • How to show images and text together in textfield or textbox.

    I want to show text and image both in text field or text box or any other container. I actually want to make an messaging application like msn message chat. Where user can add emotion along with their text messages. Do any one have any idea how to do

  • Copy and Paste from Oracle Forms to Excel

    Hi to All, I ran into this unusal problem with one user. She is trying to copy data in a cell from oracle form to excel. She does control+c and tries to control+v in excel. The data does not get pasted. I tried logging into oracle on her pc and do th

  • Pdf File can't be opened after downloading

    Hi, everyone! I am using Adobe Acrobat 7.0 Professional. I downloaded a file sent from my friend as the pdf file. I downloaded it and opened it, but it couldn't be opened. It gave me the alert information as in the attached file. Or it's that the fil

  • Credit note linked to a closed AR invoice

    Hi! I have a problem: I need to create a Credit Note for an invoice with status 'closed' but i noticed that the copy feature is disabled and i wanted to know if there was a SAP note that refers to this problem.