My lifetime calls is glitched at 4,924,000,000 and I can not figure out how to reset this PLEASE HELP URGENTLY I don't know how to resolve this
My IPhones total life time calls is at 4,924,000,00 and I can't figure out if this is a glitch because I know that I have DEFIANTLY not called for that long I don't know if this will be resolved but someone PLEASE HELP
Glad it helped!
For what it's worth, I suspect you'd have to restore the phone as new to resolve the issue. If it were mine, I'd probably elect to live with the weirdness rather than go through the fuss of a restore.
Best of luck.
Similar Messages
-
I have a iphone 5 and i can not figure out how to turn on the LED notification light. is this even possable? if not how do i know if i missed a call when i was not there to answer it visualy
If you were not there, how would you see the led?
Anyway missed calls will appear on your Lock screen under the Missed tab.
Or a small red numbered badge will appear on the Phone App icon when you have missed calls. You can then access the Recents Tab in the Phone App to see whcih calls were missed.
Missed Calls are shown in red there -
Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?
Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?
-
how do i get the phone to ring when someone calls, it seems to only vibrate and I can't figure out how to turn on the ringer
look in settings:sounds and be sure you have a ring tone set, and both vibrate buttons are off. Also be sure the volume slider id as far right as is comfortable.
-
Ever time I make a call on my iPhone 4 my FaceTime icon has a question mark in the middle of it. I can not figure out how to make it go away. Nor can I make a FaceTime call. Do I need to install a FaceTime App on my phone?
No, your FaceTime is build in, see this article for more info: iOS: Using FaceTime
Did you enable restirctions for FaceTime in Settings/General/Restrictions ->FaceTime?
Is FaceTime enabled in Settings/Phone? -
Why does my Iphone 5 ring when I get a call, but can't not figure out why it does not make a sound, when I receive a text or typing???
Deborah,
The solutions on here did not work for me. I tried.....
I have the same problem with a BRAND NEW iPhone 5c version 7.1- no sound when a text message arrives.
(1) I have "do not disturb" scheduled correctly. No partial moon on the main screen near the time and battery indicator.
(2) I have the ringer icon correct with no slash. Yes I turned the hardward mute switch to the UP position (ie the one above the + and - buttons on the left side. I tried messaging with the bell as shown and bell with a slash and neither work. The mute switch is not red (switch above the + volume hardware switch) I enabled some assistant using the Settings menu. And I press the dot (looks like a target symbol) and go to Devices and I can see what position the bell is in....either a bell with a slash or no slash.
(3) Yes ringtones are configured for text and other. I can hear them when I am under settings > sounds. But they do not link with the actual hardware.
(4) I rebooted the iPhone 5c by using the button at top, slide the red bar, then pressed it again, apple came up for a minute and it seemed to be back up.
(5) I upgraded the IPhone 5c from 7.0.4 to 7.1 using my pc and itunes. And the upgrade was successful but did not fix the text issue.
(6) I do not have it in airplane mode or silent mode.
(7) I reset all settings using Setttings > General > reset > reset all settings . this wipes settings but not data and media.
This is really frustrating. -
OS X Yosemite on my iMac 27 inch Processor 3.06 GHz Intel Core 2 Duo, 4GB 1067 MHz DDR3,
I have an app in my dashboard called AYI from Facebook.
I can not remove it, every-time I open dashboard to remove it the app opens safari immediately and I can not delete the widget.
I can not figure out how to manage this.This procedure will reset your Dashboard configuration to the default.
Back up all data before proceeding.
Please triple-click anywhere in the line below on this page to select it:
defaults delete com.apple.dashboard layer-gadgets && killall Dock
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Test. -
I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097 -
all data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ????? What is wrong with it???? How do I fix it????
You aren't attached to a bluetooth headset or other device for some strange reason? Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.
-
after making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?
Try to position your iphone that the screen is facing away from your skin.
Make sure that the back part of your phone will be the one that will contact your skin inside your pocket
Thats what i do:) -
In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
hi, i downloaded call of duty black ops on my iMac, and i had in app purchases, and it asked me if i wanted to restore them, but an error occured and I had to click cancel, now I don't know how to restore the in app purchases, does anyone know?
The developer would know, at least they should help troubleshooting.
-
I bought the subscription $9.99 for Lightroom and Photoshop. I don'T know how to install/ download them on my pcs? Plz email me or call at (310)309-9244 and walk me through steps. I need it ASAP.
Download the Creative Cloud app from your account, sign in and install the programs from there.
Mylenium -
i don´t know how to make a phone call whit my ipad...and how to senSeleneGMt a message? What do i need? or is it impossible?
You can't; not natively, anyway, since the iPad is not a phone. If you want to make a call, you'll need to use some third-party Voice-Over-IP service such as Skype.
I'm not sure what you're asking when you ask about sending a message. If you mean a text message, you can either use iMessage, which can send messages to other users also running iMessage, or you can look in the iTunes Store for SMS apps, a few of which are available. They use separate services to actually send the message and so require an Internet connection, either WiFi or 3G.
Regards. -
My new 4S is set to slide to unlock and I don't know how to answer a call.
I don't knpw how the configuration changed but it switched from slide to answer to slide to unlock.
I don't know how to answer a call and want to get the configuration back to skide to answer.
How do I do that?I should have been clearer, if I receive a call from someone who is not in my address book, I cannot answer the call because the phone remains in "Slide to Unlock" and is not in "Slide to Answer."
Maybe you are looking for
-
Hi everyone, i have a requirement that when i enter the plant number, material number, MRP element version, and range of date starting from today date till the date - it should provide the output this way. Material leadtime Satety stock available
-
Use of indexfile in import....
Hi All, Today I read somewhere to use of indexfile which will imporve in performance of import. I do as mentioned below: 1) exp scott/tiger full=y file=scott.dmp( take 2ndoption USER for export) 2) imp test/test file=scott.dmp full=y indexfile=index.
-
Query Designer crashes when using 0CALWEK
Hi all I have come accross an error when using the query designer in BI 7.0. If i try to restrict on 0CALWEEK the Query Designer first tells me there are errors but none show, then tells me there are no values for 0CALWEEK and finally crashes saying
-
What wattage adapter do I use on my ipod touch 5th generation 16gb?
I'm getting a new adapter for my ipod touch 5th generation 16gb, and I don't know what wattage adapter to use with it and what not to use
-
Hi, I bought a new iPhone 4 last month, totally fell in love with it untill there was this problem regarding the apn disappearing. I manually added the apn info and it worked fine for some time but soon after I disabled the mobile data/3g connection