My lightening charger is not fitting snug into the charging port

Hello. I am having trouble with the lightening charger for my iPhone 5. When I plug it in, the phone makes the sound that it always does, indicating that it is charging. Then, it starts making the noise over and over. The lightening charger is not fitting snug into the charging port. I tried cleaning it out and got a big ball of lint out, but the issue remains. It is hard to get a charge, I have to place my phone down and finagle the lightening cord so that it will charge. I have a Genius Bar appointment, but it isn't until the end of the week. Does anyone have any suggestions? I'm also having this issue with my car charger, so I know its not the lightening cord that came with the phone that is causing the problems.

Make a Genius Bar appointment before you make the drive.

Similar Messages

The iPhone 3G S does not fit perfect into the iPhone 3G dock does it?

Anyone else having this issue? I mean, it sits in there, but going in and coming out of the dock doesn't feel as smooth as it did with the iPhone 3G, yet Apple says the dock works with both.

I know what you are saying, which has nothing to do with the dock being compatible or if it works with both.
Does your dock work with your 3GS?
If so, then it works with the 3G and with the 3GS as Apple says it does.
I don't use a dock. I never used the dock included with my first generation iPhone, and I didn't purchase a dock for my 3G.

HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button?

My iPhone 5 Bricked after plugging it into the USB port on my AT&T car charger

I plugged my factory USB cable from my iPhone 5 into the USB port on my AT&T car charger and it killed the iPhone 5 dead. I guess I thought since Apple is making a 30 pin converter and that all of my other apple products work this way that it should work...I guess I was wrong!

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Volume problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do I use my ipod in the car without it constantly charging? I have to use a docking cable into the USB port because the 3.5 mm to 3.5mm jack I bought doesn't work on the ipod.

How do I use my ipod in the car without it constantly charging? I have to use a docking cable into the USB port because the 3.5mm to 3.5mm jack I bought doesn't work with the ipod (although it does work with an MP3 player). My ipod is a 5th generation 80GB classic.

I know this is old - but did you ever get this working. Thinking of getting a 780 ti card and I have an older mac with the mini-displayport too.

Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5 seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge

Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??

Also my Itunes and computer won'r reconize it

I have an optical mouse that came with my Mac Pro plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

Well
I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem. Just inverting it on paper did not do the reick, it needed some help with the alcohol. Of course the probelm is the debris that gets inside and it really needs to come out.
This is a huge problem for RIM devices users too.

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

Is there a specific reason why apple did not incorporate hdmi into the thunderbolt displays ?

Is there a specific reason why apple did not incorporate hdmi into the thunderbolt displays and the new imacs? Everything on the market uses hdmi...they then add one to the new macbook pros, but none on the displays. Is there a reason?

These are User to User support Forums where we all help each other. No one from Apple replies here. Obviously we have no way of knowing why Apple does or doesn't choose to do something.

SSRS sub report not fitting exactly in the parent textbox in main report.

Hi All,
I have a small sub report placed in the main report. Everything is working fine except that the sub report not fitting exactly in the parent text box is bothering me and disturbing the look of it. Can any one tell me how to make the sub report fit to its
parent properly ???
contents of my report are as below.
1st column - project name,2nd column - location(sub report),3rd column - client name,4th - consultants(sub
report), 5th - registered contractors and date(sub report).
At the end of the sub report a line is displayed indicating its end. This is what i am concerned about.

Hello,
If I understand correctly, you have get a mess format with subreport.
We can adjust the subreport report body size and tablix with the same size. It will fit exactly in the parent text box. Please refer to the screenshot below:
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?

After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?

When you right (control) click on the disk and click eject "disk name", do you pull it immeadiatly or wait a few seconds for it to unmount? Try waiting and see if you get the same message. If you do, when the disk is connected go to applications/utilities/disk utility, after opening DU, select the volume in question from the left side bar and try a permissions repair, you may also run verify disk and see if it comes up with any errors (they will be in red)

I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder? How do I get access to it to install?

I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder? How do I get access to it to install?

Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.

I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can do? C

I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can do? Can someone answer in German?

I suspect you will want to ask your question at the forum for Adobe Digital Editions which is eBook, eBook reader device focused.
Be well...

HT4623 My iPad will not come on. When I updated it, I did not plug it into the outlet. What do I need to do?

My iPad will not come on. When I updated the settings, I did not plug it into the outlet. What do I need to do to get it to come on?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

My MacBook Air keeps asking me for my yahoo password; which when correctly entered will not allow me into the account. iPad and iPhone both working on the same password/account.

my MacBook Air keeps asking me for my YAHOO password; which when correctly entered will not allow me into the account. iPad and iPhone both working on the same password.

I've got automatic downloads turned off and I tried signing out and in via the settings and still keeps asking me for an apple id.
It doesn't do it continuously, it'll just pop up randomly ... if the phone is just sitting there it may ask for my apple id and regardless of whether I press cancel or enter my password nothing happens .. it may be another 2mins, 5mins, 15mins but eventually it'll just randomly pop up and ask me again. It does accept my password though because I tried entering an incorrect password to see what happens and it gives me the error saying it's incorrect, so when I enter the correct one in the box disappears and it accepts it as I say, but only for so long before it pops up again.

My lightening charger is not fitting snug into the charging port

Similar Messages

Maybe you are looking for