My lightening digital av adaptor gets no signal?

I Brought a lightening adaptor and connected to my iphone 5s and my tv with hdmi lead all I get is no signal when switch to the hdmi Channal any ideas why ?

Was it a genuine Apple adapter or a third party adapter (Brand?)?

Similar Messages

  • I have an iphone 4G-S, I get "NO SIGNAL" when trying to view Netflix while the digital AV cable is connect to my tv an my TV is on. If TV is off, signal is fine and video plays from netflix fine. Any ideas?

    Steps I follow:
    1. turn phone on
    2. ensure signal is strong (att)
    3. launch netflix
    4. select and play video
    5. watch video play for several minutes
    6. plug in digital av adaptor with HDMI cable (not yet connected to television)
    7. ensure video continues to play
    8. connect HDMI cable to television (television not yet powered on)
    9. ensure video continues to play
    10. turn on Television
    Result: video stops, results in "NO SIGNAL" as in no bars
    11. Turn off television signal comes back and video resumes play
    Is Apple or netflix purposefuly blocking the signal?

    I should add that I see the video playing for about 30 seconds, everything looks and plays fine, then I get the "NO SIGNAL" and all att bars go away.
    also, I'm using my phone istead of my laptop becuase I don't have internet service at home, wanted to just use my phone and it's unlimitted data plan to be able to watch netflix.

  • Getting audio but no picture using Digital AV Adaptor

    I have an ipad 3 running 6.0. I use the Digital AV Adaptor to play movies through my monitor, usually via the Videos or Cinexplayer apps.
    I travel a lot and the adaptor works really well at home and at the hotels that I stay in.
    However, I'm currently in the US for a while and staying at a Marriott. At this hotel both apps indicate that the picture is playing via the external monitor but I'm not getting any picture, only audio?
    The hotel tech support can't suggest a reason.

    There's a difference between a receiver simply switching HDMI inputs which I originally thought you were using throughout the chain, and one that converts other input sources such as component/composite/S-video and output that signal via HDMI, possibly upscaling on the way.
    If it's the same model receiver or very near, then there's a good chance you'll get it working, it just may be that there's an option buried in a menu somewhere you haven't set. Do Onkyo have a user forum somwehere you could ask?
    AC

  • HT4126 I CONNECTED MY MACBOOK TO THE TV USING AN ADAPTOR, BUT I STILL CANNOT GET ANY SIGNAL

    I CONNECTED MY MACBOOK TO THE TV USING AN ADAPTOR, BUT I STILL DO NOT GET A SIGNAL, WHAT SHOULD I DO?

    I just corrected my problem.  After connecting to the TV, go to System Preferences, Sound, and select the HDMI rather than Internal Speakers.

  • Lightening to AVG adaptor?

    Can I connect my i pad mini to TV using the lightening to AVG adaptor?
    Keep getting messages on TV screen "no signal" after selecting correct HDMI source.

    You need this:
    http://store.apple.com/sg/product/MD826ZM/A/lightning-digital-av-adapter

  • How does ipad digital AV adaptor works? does it have a Analog to Digital conversion?

    I wonder how the Digital AV adaptor works? I heard the ipad 30-pin connector does not have digital video out. Does it have an Analog to Digital converter inside the adaptor?

    Yes..same thing here..I get a pop up saying This Accessory is not Suported...I click Ok and I get a 4x3 "mirror" mode on my TV. However when I play a movie it is in the proper aspect. Same goes for the SlingBox" app.  I tested photos and they appear in the 4x3 ratio as well.
    I only use the adapter for the occasional movie while staying in hotels so it's not a big deal to me that most of the items are in a 4x3 ratio.
    I'm coming from an iPad 1 so mirroring wasn't an option so technically, I didn't even know what I was missing..not sure if the iPad 2 mirror function displays in 16x9 ( or whatever the native aspect is )

  • Digital AV Adaptor Failure after first use, should I return it?

    I have one iPad 2 and one iPad.  I got a Digital AV Adaptor (DAVA) today and hooked it up to the iPad2.  The iPad screen appeared on my TV.  Played with some apps to see what worked.  Tried HBO Go, idt did not work, all that appeared was the HBO Go logo.  I unplugged.
    Later I went back and plugged back in.  Got NOTHING.  I can play music via iPod app,  I CAN play my videos that I could play via the VGA Adaptor.  But NO MIRRORING.  It's like the device is nothing more than a VGA Adaptor.  It did "feel" very warm at one point.
    I have tried 3 HDMI cables,  3 TVs and both iPads (1 & 2) with the same result.  Also read many suggestions on this site and updated the OS, shut things down started things up, etc., etc. with the same result.  It just don't work any more.
    Any suggestions?  I saw the post about the return and since this thing worked then quit except it works as a VGA Adaptor maybe it was defactive and HBO fried it.
    Thanks for your help and advice in advance...
    KCW

    Peter
    My 2 cents:
    I have used FileSalvage
    http://www.subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1
    to recover files from damaged disks. It works as advertised, within limits. Some files may be too damaged to recover. More importantly yo get to scan the disk before actually recovering, and it will give you a list of what it thinks it can recover.
    My experience was that it recovered approx 85% of the data.
    YMMV but they do have a trial.
    Regards
    TD

  • I have an old (late 2008) Mac OX S and I want to hook it to my HDTV, but I get no signal??

    I have an old (late 2008) Mac OX S and I want to hook it to my HDTV, but I get no signal??
    Please help!!

    I know I had an issue trying to connect a VGA cable to my HDTV, if I did not already have the TV input switched to the VGA input BEFORE I plugged it into my Mac.  Because the TV had not been taking to the port, it was not sending the right signals to the Mac.
    When I would later switch the TV input to the VGA after the Mac was connected, I got messed up video.
    I'm just speculating this might be related.
    But playing 20 questions (some of which have already been asked by X423423X):
    What Mac
    What TV
    What kind of TV input (HDMI, VGA, DVI, other?)
    What kind of adaptor are you using on your Mac
    Did you try with the TV input already switched to the correct input source before attaching to your Mac?

  • Lightening digital av adapter firmware update?

    When I plug my lightening digital av adapter not my ipad 4, it says that my accessory will not work until the firmware is finished downloading. I leave it plugged in, wait a few hours and nothing has happened. I checked my software, there is no update available. Does anyone have a fix to this problem. I cancelled my dish network and would like to watch movies from my ipad.

    Hi Mickey,
    I did some more testing and noticed that with YouTube-app the resolution is correct.
    So if I get a wrong resolution (or picture size) with a third party app, I can fix that by switching to the YouTube-app, playing a fullscreen video for few seconds and then returning to the third party app, which now gets the resolution right.
    The trick is to keep the third party app open. If I close and re-open the third party app it will loose the resolution again..

  • IPhone 5S lost voicemail and when I tap vm icon the phone diales voicemail and gets busy signal.  No other options show.

    iPhone 5S lost voice mail and when I tap vm icon the phone dials voice mail and gets busy signal.  No other options show.
    started yesterday.  No voice mail at all.  When I tap the voice mail icon the phone immediately dials some number and that number rings busy.  I can't select anything else.   Using Virgin mobile/  I am stumped.
    I have already tried a soft boot... power and home button....
    Help!

    Other than changing the SIM card, you don't mention any troubleshooting you did with your phone.
    If you haven't already, try the following steps as needed:
    Settings > General > Reset > Reset Network Setting.
    Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
    Restore phone in iTunes using a backup
    Restore in iTunes as a new iPhone
    IF the last step doesn't fix it, there is a hardware problem and you should make an appt. with an Apple Store Genius Bar. The fact that you haven't dropped the phone by no means rules out hardware issues.

  • Connect to Dual-Link DVI-D port on monitor using DVI-D to VGA adapter -- getting no signal

    I have a T400.  I am trying to connect to a dual-link DVI-D port on my LG monitor via the VGA port on my T400 laptop. I bought a DVI-D to VGA adapter, but I am getting no signal. 
    Do I need some other method or adapter or cable?  Monitor works fine for VGA to VGA connection.
    Solved!
    Go to Solution.

    I happened onto this thread while searching for a way to connect my T400 to my wife's 27" iMac. What I learned thus far is that Atlona makes a device (AT-DP400) that will convert dual link DVI to Mini DisplayPort. But Atlona says that one's graphic card must support 2560x1440. The T400 doesn't have a DVI out (nor does my current docking station), but it sounds like one can get a docking station that does. But that won't help if my card won't support 2560x1440. So are you saying that there is no way I will be able to use the 27" iMac as a monitor for the T400?
    -Rob 

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I am using iPad 3 and I try to use 30-pin Digital AV adaptor for mirroring on my Samsung HD TV.  Unfortunately it is not a full screen projection.  Anyone can help?

    I am using iPad 3 and I try to use 30-pin Digital AV adaptor for mirroring on my Samsung HD TV.  Unfortunately it is not a full screen projection.  Anyone can help?

    The iPad Screen is almost square, HD TVs are rectangular so will never be full screen.  When watching movies, the movies native aspect ratio will be used rather than the iPads screen aspect ratio so will look full screen if the movie is full screen, but most likely will be seen in wide screen letter box format. with black bars across the top and bottom as that what most movies from iTunes are in, format wise

  • Since the latest system update to 10.9.2 I can no longer get a signal on my TV through the HDMi lead from the Macbook Air. Has anyone else had this problem and know how to fix it.

    Since the latest system update to 10.9.2 I can no  longer get a signal from my Macbook Air to my TV. Has this happened to anyone else and how can I fix it.

    1. System Preferences > Flash Player > Advanced > Delete All
        Press “Delete All” button under “Browsing Data and Settings”.
    2. Install Adobe Flash Player.
        System Preferences > Flash Player > Updates
        Press the “Check Now” button.
        http://get.adobe.com/flashplayer/
        Download it and quit Safari from Safari menu in the menu bar.
        Follow the prompts to install Adobe Flash Player.

  • Struggling to get a signal from my Midi Keyboard

    I have Logic Pro X and a couple of weeks ago managed to successfully connect up by Korg Workstation to act as a Midi Keyboard so that I could access the library and play the sounds in real time  through the keyboard. I have just moved my studio to a new room and tried reconnecting and I am just not getting things to work at all now.
    My method has been go into my Midi set up for my Mac and connect by Focusrite Scarlett 2i4 interface . I have tested the connections and the Korg is speaking just fine to the interface. I saw a video on Youtube where in Logic X it is possible now to access the external instrument via  a Software Instrument Track instead of an External Midi track + Audio ( as it used to be) . When I do that and replace the default electric piano  with an External Instrument it finds the Korg just fine. I have collaged the various windows below. This is what I did last time and it was successful. 
    I have the record button primed but am getting no signal - not a flicker of life on the  I am no doubt doing something really basic but I cant figure out what to do and its very frustrating that I have had this working just a week or so ago. Help!

    The problem is most likely with your router.  Follow the instructions in the router's manual to reset it.  Also what security are you using?  If it's WEP upgrade to WPA.  The iPod sometimes has trouble with WEP "protected" routers.  I put "protected" in quotation marks because WEP security is essentially useless.  It can be hacked in less that 30 seconds.

Maybe you are looking for

  • IPCC 7 Determine the week number of a month

    Hello, I am working towards determine the week number of month and make appropriate routing changes only for that specific week. I have tried using the trunc(), getdate() and weekday(). But i fail to get the week number of a month, but I believe I ha

  • Edge Animate CC 2014.1 issues with the new Actions Panel

    Hi Guys - I am totally confused with the latest undated EA CC 2014.1 actions panel. With the old one - its was simple : but the new one - I get nowhere, freezes the program and I cannot edit any actions... Very frustrating - am I doing something wron

  • Turkish Character 'u0130' giving space during PDF conversion of the smartforms

    Hi, I have a PO form in turkish language , which is converted into pdf file. When we take the print of the PO form the all the turkish are displayed correctly. But when the same form is converted into pdf , then only for the turkish character 'İ' the

  • Message 764 not found; product=forms60; facility=FMG

    We have to migrate a rather big Form from 3.0 to 6i, something I did about 6 years ago, so I donot remember very much from back then. in some other forum I read that a path might not be set - which I do not believe as a form could be converted. we ar

  • Widescreen Format custom preset in Compressor 4?

    I used to do HD (16X9) format only, but ever since I saw other views, especially really cool looking cinematic music videos carrying the widescreen format I've been wanting to apply that to my videos. Currently my only known solution to this is simpl