My lightroom update is not installing (the file can't be open)

I downloaded the new version (I had 4.4) and it's not possible to open. I feel that is a mac file (dmg) but I have windows 8 and no one ask me to select which operative system I have before the download.
please let me know how solve it

If you have a license key it is cross platform Mac and or PC, you can have two installations current at any point in time. the PC downloads are located at the link below
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
If you have not yet purchased the upgrade you can still install and run for the trial period of 30 days.

Similar Messages

HT5242 I keep getting an error, and the Java Update will not install. What can I do?

I keep getting an error, and the Java Update will not install. What can I do?

Never mind. I kept trying, and finally when I opened "About This Mac" and clicked the software update from there (as opposed to the "Software Update" just below), the Java update finally worked.

HT6058 7.0.4 update will not install. What can I do?

Software will not install after download. Repeatedly gives error. Any suggestions?

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

Is there a feature in Adobe Acrobat that allows me to create a PDF that has a 'self destruct' capability? We have a situation where we need to allow people to download PDF files, but after a set time (48 hours), the file can't be opened and read (e.g., s

Can Acrobat create PDF files that once downloaded - can't be opened after some preset time (48 hours)?

Hi Edward lkeda,
I am not very sure of that however as per my knowledge , you can use Adobe send service and provide public link to your users and then after 48 hrs you can delete the file from server and make File-link inaccessible.
Hope that helps,
Please revert back for any further query. I will try my best to help you with your problem.
Regards,
Rahul Tyagi

"Some updates were not installed"

http://i29.tinypic.com/ziklqq.jpg
So I am trying to installed updates on a Lenovo Desktop 3000 J115.
The message I get is shown in the picture, but I will write it out so this thread shows up in Google:
"SL46.tmp - Common Language Runtime Debugging Services
Application has generated an exception that could not be handled.
Process id=0x390 (912), Thread id=0x38c (908).
Click OK to terminate the application.
Click CANCEL to debug the application."
"Some updates were not installed
The following updates were not installed:
Security Update for Microsoft XML Core Services 4.0 Service Pack 2
(KB954430)
Microsoft .NET Framework 1.1 Service Pack 1"
In the first place I tried uninstalling Avira free antivirus, then installing Norton Antivirus 2009 (full version), but when I restarted it would not launch. I've removed all of my antivirus's at the moment and I want to eventually install Norton after I get the updates installed. But I thought I would ask you guys to see if theres anything I can do before I consider reformatting for the 50th time. I have already googled every keyword I can think of, and this is my last resort. Thanks in advance for any suggestions!.

Welcome to the forums
You can try to install the latest version of windows update agent and see whether it solves your issue
http://support.microsoft.com/kb/949104
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

10.5.4 Update: The Installer could not install some files in "/"

I am unable to install 10.5.4 on my Intel iMac. I have rebooted multiple times, disconnected all external drives including my printer and tried the installer with no success. I have not found anything pointing to why on the forums. Any assistance would be helpful.
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0055.B08
SMC Version: 1.1f5
Thanks,

I am having the same issue, and a permissions repair did nothing for me.
I have attempted an install from software update, downloaded both the 10.5.3/4 combo update, and the 10.5.4 update and manually tried to install, each time with the same error: The Installer could not install some files in "/"

Update problem" "The installer could not install some files in "/"."

I've been trying install the 10.5.3 update, but keep getting this error message:
"The installer could not install some files in "/". Contact the software manufacturer for assistance."
I tried software update AND downloading the update for manual updating to no avail.
Anyone know how to solve this?
Thanks,
Ron

I have never heard of this problem, but try repairing permissions with Disk Utility.

After yesterday installing the latest itunes upgrade 11.1.5.5 my CD drive is no longer recognized. I do not have the file afs.sys on my computer which is supposed to cause the problem. Any ideas?

I yesterday installed the latest itunes upgrade to version 11.1.5.5. After doing so my computer no longer recognizes my cd drive Device manager states that windows cannot load the device driver, the device driver may be corrupted or missing. When I have tried to renew the driver it states the latest one is installed. I do not have the file afs.sys on my computer which is quoted as the file which causes optical drives to disappear. Any ideas

Hi, I've managed to get my CD & ipod working now but it wasn't easy. Maybe this will help you fix it.
This is what I did:
The problem: OS Windows 8.1 - was working ok with itunes (not sure which version). Upgraded to 11.1.5.5 and my old ipod stopped being recognised by itunes. As I had just bought a new ipod touch 5G I didn't pay too much attention however I soon realised that the new ipod wasn't recognised either. I uninstalled iTunes & reinstalled but that didn't fix it. I found a technote (see below) that says how to get get your ipod reconised. That worked but on a a reboot I realised that there was no CD drive appearing in windows.
It now works & this is what I did to fix it:
Went through the apple technotes on CD issues & looked a the Gear website
Looked for afs.sys file but didn't have that
The registry settings for device filters looked the same as the technotes
Device manager for CD said there were problems in the registry
I backed up the itunes folder (I was planning on a clean install & rebuilding itunes from scratch however most people want to keep their data)
I uninstalled itunes but that made no difference
I rolled back to the a system restore point that had been created not long before the upgrade to 11.1.5.5
The CD drive was now OK again
I went into Windows update and ran the updates that were available - one was for intel chipsets
I created a system restore point as a precaution
I found the registry key that is mentioned in the technotes to do with CD problems and device filters and backed it up separately as a precaution
I ran itunes (x64) 11.1.5.5
itunes asked me if I wanted to repair or uninstall - I uninstalled
I rebooted
I ran install for itunes 11.1.5.5
itunes installed ok & the CD was still there
ipods were not recognised
I followed the instructions http://support.apple.com/kb/TS1538 to update the driver
5. Verify that the Apple Mobile Device USB Driver is installed - For Windows Vista, Windows 7, and Windows 8
Update the Apple Mobile Device Driver
I now have a CD drive & iTunes recognises my ipod again - phew
Good luck

Post 10.3: Could not find the file "hw.kb" to install.

I'm getting this error on my 10.3 clients.
"Could not find the file "hw.kb" to install"
I think this is the April PRU...I have applied the post 10.3 fix and this is still not working :/
Full Message:
GenericActions.FileCouldNotBeFound{hw.kb}
Message ID: GenericActions.FileCouldNotBeFound
Related Objects: /System/System Bundles/102d38812c9437a05ee01e8bc93369f0

This was not related to the 10.3 update, atleast not directly.
I deleted the April PRU in system updates, checked for updates, and reapplied.
This solved my issue.

I have a new pc and have installed (again) CS5, however I can not install the updates Adobe Bridge, Adobe Extension Manager, Adobe Photoshop (64 bit) and Potoshop Camera Raw.

I have a new pc and have again installed CS5 however and unfortunately I can not install the updates Adobe Bridge, Adobe extension Manager, Adobe Photoshop (64 bit) and Photoshop Camera Raw ?

Hi DerrylS,
I would request you to try the below mentioned link for Error U44M1P7:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
If problem still persist and as in log file it says "Exit code 7", kindly try below mentioned links.
Link 1: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Link 2: http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
Thanks!
Atul Saini

Lightroom 3 does NOT support raw files for the Canon Sureshot S95

Have just bought the new Canon Sureshot S95
after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
Canon Sureshot S95.
Come on Adobe.....please provide an update asap.

(1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW. Hardly a satisfactory solution.
(I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ).
(2) SUGGESTION- even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting). I am sure users with that preference would still prefer a JPEG than no picture at all!
Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs. So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
JJ
* (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

10.5.2 The Installer could not install some files in "/"

I have tried to upgrade my Inter Mac Mini Core Duo 1.66 to 10.5.2.
I ran the install through software update and proceeded through the 2 restarts. Once my mini restarted I checked "about my mac" to find that it still said the system was 10.5.1
I ran software update again to find that on trying to install i now get the message
Install Failed - The installer could not install some files in "/" please contact the software manufacturer for assistance.
I then tried the same with the combo updater and got the same message
I have tried to verfiy my disk or repaire permissions using disk utility for it to completely hang with the spinning beach ball and causes finder to crash.
I have also booted up with the leopard disk in and tried disk utility which says there are no problem with the disk but disk utility in leopard still hangs
Can anyone help??
Is anyone getting the same problem?
Thanks

I'm having the same problem installing the Leopard Graphics Update on my Dual 2.5 G5. Installing 10.5.2 went fine, but afterwards the graphics update would fail to install, with the same error message you got. I tried both Software Update and downloading the standalone installer.
But wait, there's more! I also can no longer repair permissions using Disk Utility. I get the following message: "Error: The underlying task reported failure on exit." Booting from my Leopard install CD does allow me to fix permissions.
Lastly, my second internal hard drive is now also behaving oddly, Any time I try to drag a file to the Trash, I get a dialog box telling me: "The item "(file name)" will be deleted immediately. Are you sure you want to continue?"
I've run DiskWarrior from the CD and tried fsck in Single User mode (no errors found). Nothing seems to help
I had no problem updating to 10.5.2 on my MacBook, but the update to my desktop has been a real booger. Anyone who can offer any input, I'd sure appreciate it.

My iTunes installation via Windows 7 does not install the Apple Mobile Device Support file

I have followed several suggestions to resolve the problem caused because of my update of iTunes does not install the Apple Mobile Device Support folder, thus making it impossible for me to sync my iPhone 4S to my desktop version of iTunes. I have tried to install the AppleMobileDeviceSupport.msi file and it almost completes the installation before "rolling back" the entire process and giving me a message that there was a problem with the installation. Has anyone been able to solve this problem. I use Windows 7. I have seem some :"solutions" that seem to work for some people, but not for me, and evidently not for many others? Finally, would it matter if I installed Safari on my desktop and tried to install iTunes using Safari?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Safari 3.1 The installer could not install some files in"/"

I attempted to download and install the latest Safari 3.1 and Security update on march 18, 2008.
After validation and subsequent re-start of the machine the following error message was displayed.
I attempted to download and install the latest Safari 3.1 and Security update on march 18, 2008.
After validation and subsequent re-start of the machine the following error message was displayed.
*_None of the checked updates could be installed. The installer could not install some files in"/"._*
*_Contact Software Manufacturer for assistance._*
After the iMac hung on the message and a "OFF button push reboot", I attempted to run Safari and the icon bounced once and the app did not run. "Safari Broken" couldn't surf the net.
I replaced the safari app file with an original 3.04 from a memory stick and rebooted and it ran the next time around.
Other attempts days later produced the same results. Safari Broken
Any method of correction? .

See discussion from Clearlake regarding Safari 3.1 failed installation...

My lightroom update is not installing (the file can't be open)

Similar Messages

Maybe you are looking for