My line in does not work with output from my ipod

I hooked my ipod up to the line in and changed the sound pref's to line in. No sound comes from the speakers, YET, I see the volume graph on the sound prefs at high levels. I then checked garage band. even though I can record the sound from my ipod using the line in, it does not play as it's recording in garage band, HOWEVER, when I play the track back it DOES play. I have the volume up on my IPOD classic, and it plays thru any other output source.
Then I plugged my radio's output port (amplified) into the port, and it still does not output thru either the line out port OR the built in speakers. NOTHING I plug into the line in port will make sound out of the computer (either speaker setting), YET, the volume adjustment definately shows that there is sound coming into the computer. And as I've stated above, when I record the "silent" input from the line in, I can then play it back and HEAR the songs.
This is very strange and I need it fixed...
YES: I've changed the sound pref settings to LINE IN
YES: I've played with the settings of garage band's audio
YES: I've rebooted
nothing makes it work.
Sure looking for a solution.

Please do not give this any thought. I was such a dummy.. duh, you have to have something running to PLAY the input!!! I thought the Monitor was on in garage band, and found it was not.....
have a nice day
Sure wish you could remove posts you've made after you do the "DUH" thing.
dale

Similar Messages

Ipod touch does not work with hex from sharper image

I just bought an ipod docking/speaker from sharper image (Hex) for my ipod touch. My ipod does not work on it. I have also had problems playing my ipod touch music on ihome products - works on some but does not work on others. Is it my ipod touch. thanks.

Some docks are not compatible with iOS 5. Ceeck with the manufacturer. Other users have post problems with iOS 5 and iHome docks too.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Applet does not work with a proxy server.URgent

Hi,
I have an asp page being hosted from a IIS server.
The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
The problem occurs when I use an proxy in the middle.
I have changed the browser settings to include the proxy.
The following is the error I recieve:
Full :http://172.25.11.63:4590/
<-------------------------------->
OPening input stream
in Run ::::
ERROR: Created data socket but can't open stream on
it.172.25.11.63:4590//
172.25.11.63:4590//
java.io.FileNotFoundException: 172.25.11.63:4590//
     at com/ms/net/wininet/http/HttpInputStream.connect
     at com/ms/net/wininet/http/HttpInputStream.<init>
     at com/ms/net/wininet/http/HttpURLConnection.createInputStream
     at com/ms/net/wininet/WininetURLConnection.getInputStream
     at TalkClientApplet.rendezvous
     at TalkClientApplet.actionPerformed1
     at TalkClientApplet.start
     at com/ms/applet/AppletPanel.securedCall0
     at com/ms/applet/AppletPanel.securedCall
     at com/ms/applet/AppletPanel.processSentEvent
     at com/ms/applet/AppletPanel.run
     at java/lang/Thread.run
...Disconnecting.
Following is my code.
url = new URL("http://" + host +":"+i);
urlconnection = url.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
          System.out.println ("Protocol: " + url.getProtocol());
          System.out.println ("Host :" + url.getHost());
          System.out.println ("Port :" + url.getPort());
          System.out.println ("File :" + url.getFile() );
          System.out.println ("Full :" + url.toExternalForm());
          System.out.println ("<-------------------------------->");
os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
System.out.println("OPening input stream ");
// is = new DataInputStream(urlconnection.getInputStream());
     System.out.println(urlconnection.getInputStream());
is = new DataInputStream(urlconnection.getInputStream());
The exact place where I get the error is whn i call URLConnection.openInputStream().
Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
Please help.This is urgent and a showstopper

Thanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
Example:
I use this code:
try {
            URL url = new URL(protocol,hostName,portNumber,URLstring);
            InputStream in = url.openStream();
            BufferedInputStream bis = new BufferedInputStream(in);
            StringBuffer input = new StringBuffer(60);
            int c;
            while ((c = bis.read()) != -1){
                System.out.print((char)c);
                input.append((char)c);
            bis.close();
            dataFromServer = input.toString();
        catch(Exception ex) {
            ex.printStackTrace();
        }I use input file test.html with exactly 100 chars ('a')
Netscape Java Console:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
Netscape Java Console:
?JL?yyxk?cedataFromServer : ?

Adobe Flash Player does not work with Safari. What can I do?

Hi,
I have a MacBook Pro, Retina, 15 inch, late 2013, 2 GHz Intel Core i7, using OS X 10.9.4. I have installed Adobe Flash Player. In my System Preference, in the advanced settings, it is set to install updates also tells me that I have the NPAPI Plug-in (version 14.0.0.145) installed but not the PPAPI Plug-in. Is this the reason why it does not work with Safari (keeps telling me to download the app, which I did but still does not work)? Is there any way I could fix the problem? Please, help.
Thanks.

If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
          When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
          Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
          Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
          Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
          Allow (or Enable) plug-ins
Then click the button marked
          Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
          Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

OBI 11g Enterprise Manager (EM Website) does not work with IE8 (v8.0.6)

I am unable to login to the 11g EM website on Windows x64 2003 server. I get the below error:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0)
Timestamp: Wed, 6 Oct 2010 10:41:18 UTC
Message: Object doesn't support this property or method
Line: 4354
Char: 1
Code: 0
URI: http://YZU-1:7001/em/afr/partition/ie/default/opt/boot-11.1.1.3.0-0084.js
Any help is appreciated.
Thanks
B

Hi,
OBIEE 11g does not work with IE8.
Check this......What's wrong in OBIEE 11g
Regards,
Srikanth

Adobe Fourms does not work with Opera too well

Adobe Fourms does not work with Opera too well. I have to use in Opera "Identify as Firefox just to post this message!
I also have run into the same junk with Hotmail.
Web Design Tip: Always code for Opera and all other browsers will fall in line most of the time.

dave milbut wrote:
of course you're right east texas. hadn't noticed that. bad bad adobe. someone smack them with a rolled up news paper on the snout!
I've installed a button in my Firefox tool bar to toggle iFrames on and off through a Firefox add-on called "Toolbar Buttons".
The forum Reply Editor does not work when iFrames are blocked, so I need to toggle them back on when posting, then back off. I imagine that's better than having them on all the time.
Message was edited by: Ramón G Castañeda

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

AT&T Microcell does NOT work with Time Warner Technicolor Modem!

After a frustrating two weeks of working through problems with AT&T, trying to get my Microcell on-line, Time Warner finally informed me that the Microcell does not work with their new Technicolor modem. Incredibly annoying that none of the AT&T reps I spoke to knew this. I walked in the Time Warner office to swap out the moden, the clerk there immediately knew the problem because he use to work at AT&T. How a former AT&T rep knew this and none of the new ones did, is beyond me.

There are so many ISP configured routers and gateways out there that it is impossible for AT&T support to keep track of what is compatible and what is not. We are just starting to see reports of incompatibilities with the Technicolor gateways (TWC equipment has a long history of problems with the MicroCell). Unfortunately the support reps are limited in what they can tell the customer and unless AT&T documents and verifies equipment incompatibilites they can't say anything. What the "former AT&T rep" knew may have been in-house discussions. AT&T, like any provider, has to be careful not to immediately blame the other party without "proof". The more documented complaints AT&T receives concerning a specific piece of equipment the better. However, it is up to the ISP to fix and/or replace their equipment when it comes to compatibility problems. Specific firmware pushes for specific equipment by AT&T to the MicroCell is not a viable alternative nor is it realistic.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

My line in does not work with output from my ipod

Similar Messages

Maybe you are looking for