My linkeys e2000 gets disconnect each time someone connects wirelessly

This is happening all the time and my isp does not have a solution for it so hear I go.
My internet connection seems alright when I'm the only person using it but when family or guess comes over and wants to use it my whole internet connection gets disconnected and I have to wait about 20 minutes to if it's connected. Yes I time it because this has been happening all the time.
I've tried disconnecting the router and modem, waited 5 minutes and still no connection.
My software is up to date.
I tried pressing the center butten for a few seconds, nothing. 
All I could think of has been done and no results. The only thing is that I had to wait thats it. 
at times I would feel that when people connect it disrupts the wifi or modem.
Does anyone know why this is happening and a solution to fix this?

hawkweb wrote:
This is happening all the time and my isp does not have a solution for it so hear I go.
My internet connection seems alright when I'm the only person using it but when family or guess comes over and wants to use it my whole internet connection gets disconnected and I have to wait about 20 minutes to if it's connected. Yes I time it because this has been happening all the time.
I've tried disconnecting the router and modem, waited 5 minutes and still no connection.
My software is up to date.
I tried pressing the center butten for a few seconds, nothing. 
All I could think of has been done and no results. The only thing is that I had to wait thats it. 
at times I would feel that when people connect it disrupts the wifi or modem.
Does anyone know why this is happening and a solution to fix this?
Make sure channel width is set to 20MHz only. Set it to a fix channel (1, 6, 9, or 11). Customize the advanced wireless settings, set beacon interval to 50, fragmentation threshold to 2306 and RTS threshold to 2307. If you have the same issue after doing these steps, don’t forget to update the router’s firmware to the latest. You can download it here http://homesupport.cisco.com/en-us/support/routers/E2000. After the router upgrade, reset and reconfigure.

Similar Messages

  • Is there a way to create a temp table each time someone hits a procedure?

    I am creating a procedure in Oracle 10g to take data from Oracle to be put in a cognos report. The problem with creating a perminent table is that several people will be running this report at the same time, which means the procedure will be run each time someone runs this report. The perminent table will either drop the old data or the data will get mixed up which means the different peoples reports will not be correct. I tried putting a lock on the tables that would release the lock once one person was done running their report but that didn't work. I suggested we put the data directly into the cursor but what happens when more than one person runs this procedure at the same time?
    Any help on figuring out how to resolve this would be greatly appreciated.

    Hi,
    If there is one table 100 people inserting in the same table, i dont see a problem.
    Few things you will have to take care of.
    When you are retireving the data from teh table to show on the report,
    how will you identify it is for which user, obviously you store the user name too.
    Now this table will grow in size, so make sure when the report is exited you delete rows from teh table only pertainign to the user.
    Over a period of time you will face more problmes of slow response due to continous deletes because of something called as HWM.
    So make sure you also gatehr statistics for the table at regular intervals.
    So,
    1) Store user while isnerting, retrieve data only for that user in teh report
    2) delete data on report exit only for that user
    3) gather statistics for table at regual intervals.
    4) Ofcourse Build indexed for "good" response time, but Benchmark  against you data whatever you are doing.Cheers!!!
    Bhushan

  • What do they mean by your apple id has been disabled and how do I enable it?  I get this each time I try to update my apps.

    what do they mean by your apple id has been disabled and how do I enable it?  I get this each time I try to update my apps.

    Got it sorted. AN e-mail to teh support centre got me three replies, two reasuring me that someone os working on it and the third giving me the information that the ID is enabled again and ready to use. All within 24h. Of course without any information as to why the problem came up in teh first place. At least it was swift action.

  • ITunes crashes each time I connect/disconnect ANY USB device... OR even Ethernet

    Hi,
    I use the last version of both iTunes (11.1.5 64 bits, last version detected) and Windows 8.1 on an Asus G750J (64 bits) and for several weeks now iTunes crashes EACH TIME I connect or disconnect ANY USB device (not only my iPhone, but my external hard disk or my... mouse) and even my Ethernet port...
    None of my other softawares are impacted
    Thanks for your help
    Serge

    Reinstalling the 64 bit version in the x36 programm folder seems to solve the problem but it's not satisfactory. I'd prefer to keep the advantage of beeing under the 64 bits version.

  • My phone flashes each time someone calls or messages me. How do I stop flash?

    My phone flashes each time someone calls or messages me. How do I stop flash?

    Settings / General / Acessibility. Explore the Hearing section.

  • Have a new iPad with ios6.  Will not send emails. Addresses are valid  but get notice each time that recipient was rejected by the server.  No help on web site, and Apple's only manual is for previous os version.  We miss Steve Jobs.

    Have a new IPad with IOS6.  Will not send emails.  Addresses are valid but get notice each time that "recipient was rejected by the server."  Apple has apparently neglected to put out a manual with IOS6 and the previous manual has no indication of what to do.  Really miss Steve Jobs.

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • Is MacKeeper supported by Apple?  I keep getting pop-ups from it but I'm also getting them each time I click links within links? This is all new.

    Is MacKeeper supported by Apple?  I keep getting pop-ups from it but I'm also getting them each time I click links within links?

    Please post a screenshot that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

  • Each time I connect my ipod to computer I am asked to register.

    I cannot get the entire registration screen to view in Itunes- think I'm missing a Submit button?

    I'm having a similar problem. I'm able to sync videos, podcasts and music, but each time I connect, I'm asked to register. When I select "submit" to download the free videos, I get an error message (something about the iTunes store not available). I also find that I get serious blue screen crashes when my Nano is connected and I try to use different features (for example, when I first attempted to check Apple support in the iTunes menu, my system crashed with a blue screen - my Nano was connected). I disconnected the device and now can access Apple support. Any suggestions?

  • Dear Communities, please kindly assist me. I use iphone 3GS with Software Version 4.1. Each time I connect my iphone to my Laptop through itune. itune automatically tells me that itunes connect to itune store. An unknown error occured(306)

    Dear Community,
    Please, kindly assist me with following challenges. I use iphone 3GS. I have used the phone for almost a year now. My iphone 3GS cannot connect to the itunes store. Each time I connect my phone to my Laptop through itunes. A message will automatically come up which states that "iTunes could not connect to the iTunes Store. An unknoown error occured (306)". It also make a footnote which states "make sure that your network connection ia active and try again". When I click the button labeled OK just below the messages, another message will come up which reads, "A new iphone software version (5.1) is available for the iphone software. Would you like to download it and update your iphone now?". It gives me the option buttons such as CANCEL or DOWNLOAD AND UPDATE or DOWNLOAD ONLY. If I click on DOWNLOAD AND UPDATE or DOWNLOAD ONLY. Another message will appear which states that "The iphone software update Server could not be conted" With a Footnote that states "Make sure your network settings are correct and your network connections is active, or try again later.
    The above challenge has continued for more that 3 months now. This challenge has hindered me from installing some applications like Facebook Application for iphone, LinkedIn application for iphone and a lot of other applications. Each time I try to get these applications my iphone 3GS while inform that my current ios version 4.1 cannot work with the application, that they requires at least ios version 5.1 or above.
    Please, I really need your kind assistance. I am ernestly waiting for responses.

    Dear Tim,
    I saw your message. Below are the problems:
    Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
    1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
    2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
    The above is the challenges I am facing now.

  • HT202213 can home sharing link automatically or do I have to connect each time after connection is lost ie if i leave house for day with phone do I have to connect shared library again on phone in evening when back in house?

    Can home sharing link automatically or do I have to connect each time after connection is lost ie if i leave house for day with iphone or ipad do I have to connect shared library again on iphone/ipad in evening when back in house? It would be good if it just links automatically

    Well then maybe I misunderstood what you meant even though now that you explained it again, I should have though about that.
    When you leave the house in the morning with your device, you lose the connection to the library because you are no longer on the same WiFi network as you are at home. You have to be on the same network in order to use Home Sharing. Once you get home again, you have to select the Shared Library again.
    I apologize for the confusion or misunderstanding.

  • Each time I connect my z10 to the windows PC link it says that there is a software update !!

    Each time I connect my z10 to the windows PC link it says that there is a software update !!
    After I finish the update and I disconnect my phone then I come back after minutes and connect my phone again the link says again that there is a software update !! I did that 5 7 times till now and here is the message which I see every time
    " Included in device software update 10.1.0.4181 :
          This important software update includes a number of new features designed to help keep you moving! Some of the enhancements include improvements to the BlackBerry Hub, BlackBerry World and BlackBerry Balance. Visit blogs.blackberry.com/blackberry-10-software-updates to learn more about the specific features. "
    could u help me Plz ,, is this really updates or what !!

    I am having the same issue with Link, posted my response in the Link Forum.

  • How can I transfer photo from my iPhone 4S to my pc . Each time I connected to my pc I can not see those pictures let alone burn them into cd

    How can I transfer photo from my iPhone 4S to my pc? . Each time I connected to my pc I can not see those pictures let alone burn them into cd

    importing pics http://support.apple.com/kb/HT4083

  • Each time I connect my iPhone 4s in to iTunes as it keeps trying to set up the phone as a new one. How do I fix this?

    Each time I connect my iPhone 4s to iTunes, it tries to set up my phone as a new one/restore from back up. I have it all set up already, but it keeps appearing. What do I need to do to stop this?

    Hello there, deelish.
    A great Knowledge Base article that has some valid information is:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    The pertinent section for you would be:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues.
    Thanks for reaching out to Apple Support Communities!
    Cheers,
    Pedro D.

  • Itunes crashs each time I connect my IPHONE 3G

    Hi,
    I cannot synchronize my Iphone since 4 weeks ago. Each time I connect my Iphone to my computer Itunes crashes and freeze right away.
    I already uninstalled and installed Itunes following the steps from the apple website.
    Thanks for helping me,
    Jenny

    Jenny,
    Make sure the iPhone is directly connected to a high-speed USB2 port on the PC, not plugged into a hub, monitor, or keyboard. Also make sure the iPhone is connected using the cable that came with it.
    Does iTunes quit unexpectedly when syncing the iPhone in another user account or on another computer? This article: http://support.apple.com/kb/TS1275 will walk you through creating another user account.
    Try restoring the iPhone from recovery mode as shown here: http://support.apple.com/kb/HT1808 Restoring the iPhone could cause some of the information to be lost if there is not a current backup. This article: http://support.apple.com/kb/HT1766 provides more information about iPhone backups.
    -Jason

  • Itunes writes off $ 1 each time they connect to the Internet. Shopping at the time was not. For what? How do I know?

    Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?

    Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?

Maybe you are looking for

  • Java SE 6 Runtime

    I have purchased and downloaded Minecraft. When I try to open it, it gives me the message "To open "Minecraft," you need a Java SE 6 Runtime. Would you like to install one now?" I then click Install. A "Software Update" window pops up, and immediatel

  • Report Job failed when Bursting is used in BI Publisher 11.1.1.5

    The Report Job failed when Bursting is used. error message: [INSTANCE_ID=aimedap1s.1347261753557] [OUTPUT_ID=1421][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document at

  • Printing to a PDF from Microsoft Word

    I need to print to a PDF from Microsoft Word. Is there any way to do so in order to have the hyperlinks in the Word document show up and work in the PDF?

  • SQL Reporting services publishing through ISA

    Hello colleagues. I have SQL 2012 Reporting Services. Into internal network when I in internet explorer go to https://reports2.domain.ru/reports - all fine. I publishing reports2.domain.ru to External via ISA 2006. Sharepoint don't used. From Interne

  • Exception error_message in rfc function module

    Hi all, I am getting a short dump Raise exception in my R/3 system when calling a RFC function module in R/3 for printing  a label in LOFTWARE. The error analysis shows the that exception condition 'Nlink exception' condition raised . The rfc destina