My Lion Server gets stuck on 'Reading Settings when configuring Network Users and Groups

On 10.7.1 and it gets stuck on this setting: Any thoughts?

Hi,
>>On the Server 2012 R2 - I can add the User but the field to put in the Password and Confirm Password are greyed out.
This functionality is being removed because the password was stored insecurely.
Regarding this point, the following article and blog can be referred to for more information.
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Group Policy Preferences Password Behaviour Change – MS14-025
http://www.grouppolicy.biz/2014/05/group-policy-preferences-password-behaviour-change-ms14-025/
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Similar Messages

Lion Server Profile Management error reading settings

After starting up Lion Server the profile management pane showed an error. It is also not possible to login via de browser to the profile manager. How can I fix this? Using the default httpd.conf file did not help.
This is one of the many problems I have with Lion server that does not work as expected. So if someone has a solution to remove all profile settings from my client MBP than I can try to revert back to Lion on my server also.
I hope this question is also read by someone of apple as this is not the quality I expected from apple. It lacks decent documentation and the setup of Portable Home Users is not possible. I thought apple product were self explaining and intuitive. This reminds me of the old Windows days: sitting days to figure it out and use a lot of terminal commands.

Did you ever find a resolution? If not then this might help Server: An error with code -1 occurred while setting up Device Management

Changing users and groups settings without unlocking

I recently upgraded to Mountain Lion and have noticed that I can change the settings in preferences for Users and Groups without unlocking.
Should this be the case?

I tried what you suggested but there is no change.
Many Thanks

My CS5 start up splash gets stuck at 'Reading fonts...ABSALOM', can anybody please help

My CS5 start up splash gets stuck at 'Reading fonts...ABSALOM', can anybody please help

Fritz,
You may try the list, especially 4) or 6).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

In system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, i cloud user and groups network and more

in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more.
Genius bar told me to erase the harddisk and install OSX Maverick again. This has not changed the problems with the system settings

You need to Repartition the drive as One partition which will erase all data from it and then reinstall OS X. then with the initial setup system you chose the language on the first screen that comes up. That sets the language for the whole system.
There is no other way of completely removing certain information created by a previous owner. this hold strue whether you are selling or give a Mac to someone.
To do the repartitioning you need to use the Online Internet Recovery system, if the Mac came with Lion 10.7 or above, or from the original system reinstall discs that came with it when it was new.

Imac gets stuck on spinning circle when shutting down

I have had my mac for only 1 year and still getting use to the troubleshooting. My Imac keeps getting stucking on spinning circle when I shut down or reboot. I have unplugged all my external hard drives and printer. Nothing seemed to work. Can someone point me in the right direction.
Mac OS X Lion 10.7.4 (11E53)
4gb Ram
Processor 2.5 GHz Intel Core i5

You might want to make sure that there are no open applications when you shut down, one of them may be hanging your Mac trying to shut down. Another thing to look for is to make sure that there are no print jobs that are not complete. Open the print and scan preference pane, double click your printer and see if any things hanging there.

Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16

Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone.

When I exit firefox it closes the program but it gets stuck in memory so when I open it again i have to kill the process in task manager

When I exit firefox it closes the program but it gets stuck in memory so when I open it again i have to kill the process in task manager, and it can be right away or I can come back a few hours later and its still stuck in task manager, I am tired of having to kill the processes every time I use firefox.
== This happened ==
Every time Firefox opened
== a week or so a go ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; AntivirXP08; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Hanging at exit is most often caused by an Extension or a Plugin.
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now thanks

Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now thanks

quicken should work with lion.
Quicken Essentials will work with Lion. Most people that have used Quicken for a while (i.e. Quicken 2007) have found that Quicken Essentials isn't much better than a basic spreadsheet. It is a significant step down from previous versions and does not offer many of the features previously offered. Right now, it seems like the two most common options are iBank and MoneyDance.
Frankly... this is a major opportunity for these companies. The largest commercial distributor of this type of product has been Intuit (Quicken). That makes it hard for any other company to get any of that market as so many people were already using Quicken and may have had years of data stored in it. Now, with Quicken effectively out of the picture, it's a great chance for another company. Just imagine if iPhones were suddenly off the market. That would give other manufacturers a tremendous opportunity since they wouldn't have to fight an up hill battle against a market giant.

My iphone 5 get stuck in locked screen when two or more missed calls or messages shown on locked screen list

My iphone 5 get stuck in locked screen when two or more missed calls or messages shown on locked screen list

Hi bhagath1339,
Welcome to the Apple Support Communities!
The first troubleshooting steps I would recommend in this situation would be restarting and if the issue continues, resetting the iPhone.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If the issue continues after restarting and resetting, it may be necessary to restore your iPhone to isolate software versus hardware. Please follow the attached article if you need assistance restoring the device.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a great day,
Joe

I just updated my iphone 4 to IOS 7.0.4 and it gets stuck backing up on step 2 of 7 and sometimes says step 2 of 4. I've got 2.09 GB free and ive reset it and still wont back up.

I just updated my iphone 4 to IOS 7.0.4 and it gets stuck backing up on step 2 of 7 and sometimes says step 2 of 4. I've got 2.09 GB free and ive reset it and still wont back up. It also says my phone has never been backed up to the computer, but ive been doing it for 2 years on it. My Ipad 2 also was getting stuck on step 2.

Hey there Ashleyehall,
Thank you for your question. It sounds like iTunes is unable to complete a backup of your iPhone. I found this article for you to help troublehsoot the issue named:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Symptoms
iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
Thank you for using Apple Support Communities.
Take care,
Sterling

Right now, I'm stuck in the settings, when I press the sleep/wake button or the home button it doesnt let me. But is not frozen or any thing just the buttons. help me please!!!!!

Right now, I'm stuck in the settings, when I press the sleep/wake button or the home button it doesnt let me. But is not frozen or any thing just the buttons. help me please!!!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Event ID 1085 on DC - Failed to Apply the Group Policy Local Users and Groups Settings

I have a domain with 2 DCs. The primary DC is running Server 2012 and is raising Event ID 1085 every 10 minutes and 20 seconds.
Windows failed to apply the Group Policy Local Users and Groups settings. Group Policy Local Users and Groups settings might have its own log file. Please click on the "More information" link.
System
- Provider
[ Name] Microsoft-Windows-GroupPolicy
[ Guid] {AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}
EventID 1085
Version 0
Level 3
Task 0
Opcode 1
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-10-20T20:09:03.706992400Z
EventRecordID 130087
- Correlation
[ ActivityID] {FDDFB8C5-9ECF-41B9-B2B4-3AD0B345A37A}
- Execution
[ ProcessID] 1000
[ ThreadID] 3280
Channel System
Computer SERVER.DOMAIN.NAME
- Security
[ UserID] S-1-5-18
- EventData
SupportInfo1 1
SupportInfo2 4404
ProcessingMode 0
ProcessingTimeInMilliseconds 10343
ErrorCode 183
ErrorDescription Cannot create a file when that file already exists.
DCName \\SERVER.DOMAIN.name
ExtensionName Group Policy Local Users and Groups
ExtensionId {17D89FEC-5C44-4972-B12D-241CAEF74509}
Everything I look up for Event ID 1085 seems to be about a different cause.
Any ideas?

I enabled tracing on a domain gpo and I still get the error when running gpupdate /force .
I'm also still getting Event 1085. Here's the trace file. I've anonymized the site/domain and the GUIDs.
2014-10-21 11:16:54.003 [pid=0x3e8,tid=0xcd0] Entering ProcessGroupPolicyExLocUsAndGroups()
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] SOFTWARE\Policies\Microsoft\Windows\Group Policy\{GUID-1}
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] BackgroundPriorityLevel ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] DisableRSoP ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] LogLevel ( 2 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] Command subsystem initialized. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Background priority set to 0 (Idle).
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ----- Parameters
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] CSE GUID : {GUID-1}
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Flags : ( X ) GPO_INFO_FLAG_MACHINE - Apply machine policy rather than user policy
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_BACKGROUND - Background refresh of policy (ok to do slow stuff)
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SLOWLINK - Policy is being applied across a slow link
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_VERBOSE - Verbose output to the eventlog
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_NOCHANGES - No changes were detected to the Group Policy Objects
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LINKTRANSITION - A change in link speed was detected between previous policy application and current policy application
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LOGRSOP_TRANSITION - A change in RSoP logging was detected between the application of the previous policy and the application of the current policy.
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_FORCED_REFRESH - Forced Refresh is being applied. redo policies.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SAFEMODE_BOOT - windows safe mode boot flag
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_ASYNC_FOREGROUND - Asynchronous foreground refresh of policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Token (computer or user SID): S-1-5-18
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Abort Flag : Yes (0x313be090)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] HKey Root : Yes (0x80000002)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Deleted GPO List : No
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Changed GPO List : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Asynchronous Processing : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Status Callback : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] WMI namespace : Yes (0x32273740)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] RSoP Status : Yes (0x320cc7f4)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Planning Mode Site : (none)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Computer Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] User Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Calculated list relevance. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ----- Changed - 0
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Version : 19267878 (0x01260126)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-2},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-2}\Machine
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-2}
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Prev GPO : No
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Next GPO : Yes
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-4}{GUID-5}{GUID-6}{GUID-7}{GUID-8}][{GUID-9}{GUID-10}][{GUID-11}{GUID-5}{GUID-6}]
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam2 : 0x3146f978
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Link : LDAP://DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-2}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ----- Changed - 1
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Version : 1245203 (0x00130013)
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-12},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-12}\Machine
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Controllers Policy
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-12}
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Prev GPO : Yes
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Next GPO : No
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-9}{GUID-10}]
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam2 : 0x324e8198
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Link : LDAP://OU=Domain Controllers,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-12}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Completed get next GPO. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] WQL : SELECT * FROM RSOP_PolmkrSetting WHERE polmkrBaseCseGuid = "{GUID-1}"
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Purged 2 old RSoP entries.
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Logging 2 new RSoP entries.
2014-10-21 11:16:54.159 [pid=0x3e8,tid=0xcd0] RSoP Entry 0
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] RSoP Entry 1
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] Completed get GPO list. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] IsRsopPlanningMode() [SUCCEEDED(S_FALSE)]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed settings update (csePostProcess). [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed CSE post-processing. [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.267 [pid=0x3e8,tid=0xcd0] Leaving ProcessGroupPolicyExLocUsAndGroups() returned 0x000000b7

User and group settings are not pushed

Hello,
I am just setting up a Mavericks environment including Server.app and I am facing a problem that I could not solve up to now.
None of my profile manager settings for users or groups are pushed to the mobile users on my client computer. The device registration worked without problem and also the computer settings are pushed but not the ones for user and group settings.
In my productive mountain lion environment this is no problem.
Is there any was to force the settings update for users as it is possible for computers?
Any hints are appreciated
Michael

I too am having this issue.. I had my school environtment running great on 10.8... then we had to upgrade the server to 10.9 to use the new volume purchashing stuff with ipads.. now this 10.9 has broken all my previous macbooks in the school... I can enroll, install certs, and some networks stuff but the main group with all the macbooks and restrictions will not push... it even removed them from the machiens that were working with 10.8... very big issue.. apple needs to help?

Upgraded to 3.1 and lost all users and groups. How do we get them back?

We ran the update to Server 3.1 (from 3.0) on our Mavericks Mac-Mini Server.
Everything had been fine before the update, but now all users and groups have completely disappeared.
The only user we have is the main administrator log-in.
Since we verified that all of our data, wikis, and other items are still in place, it might be easier to just re-create the groups and users (and permission therein).
But, we cannot log into Workgroup Manager, nor can we add users/groups in the Server app (because it is "grayed-out").
Can somebody please provide a suggestion??
We are a small engineering firm with only 5 users, so it's not like this would take all day.
Thanks, Mike

Have you tried
sudo sso_util configure -r REALM_NAME -a diradmin afp
(cf. Lion Server: AFP users unable to authenticate with Kerberos after upgrading)in Apple Support ?
p.

My Lion Server gets stuck on 'Reading Settings when configuring Network Users and Groups

Similar Messages

Maybe you are looking for