My list of Arch issues

Hello,
Below is a list of issues I am having with my install of Arch.
amd-ucode error on start-up - I have read this can be handled by installing the AMD microcode, but I am not certain if I should do this or not since it seems to affect the hardware. Everything seems to run fine even with the error, but it does consistently appear on start up.
Terminal workspace switching killing X - back when I used Fedora I was able to switch to a separate terminal workspace by pressing Shift-F2, Shift-F3, etc, but with Arch when I do this X gets screwed up upon returning to it by pressing Shift-F1.
NetworkManager not working after logging out - this happened only after my most recent update. It works fine on initial boot-up but after logging out and logging in again nm-applet refuses to appear. Restarting the NetworkManager service with systemctl does make it appear again but then it sees no connections.
lxdm being unreliable - lxdm frequently seems to crash and kick me to a purplish-blue screen. I have tried reinstalling it and restoring it to it's default configuration but that did not seem to solve the problem.
Any suggestions on any of these would be appreciated.
Last edited by Hamish (2013-05-02 22:14:15)

These are (most likely) separate issues that need their own threads, having a laundry list is not very helpful. For the microcode stuff, read up on the wiki page if you're still uncertain. There shouldn't be any issues, especially since the microcode is loaded as a module and isn't permanent.
https://wiki.archlinux.org/index.php/Microcode
The rest of these issues we can't help you with much unless you provide more information about your setup.
Last edited by SolarBoyMatt (2013-04-19 19:55:43)

Similar Messages

SharePoint Online list view threshold issues: "because it exceeds the list view threshold enforced by the administrator"

SharePoint Online list view threshold issues: "because it exceeds the list view threshold enforced by the administrator"
Office 365 SharePoint Online can be problematic when it comes to exceeding the list item threshold (e.g. 5,000).
Examples of what happens after exceeding the threshold (e.g. 5,000 items):
You can’t create new forms for the list in SharePoint Designer.
You may have challenges with metadata fields in the forms (e.g. adding metadata values, editing metadata values, deleting the metadata column from the list).
Cannot save the list as a template (i.e. you get the threshold error).
Issue I'd like assistance with: how can I create a custom NewForm in SharePoint Designer
when the list exceeds the threshold limit, given this is Office 365 SharePoint Online and I don't have access to increase that limit?
As a control for my testing, I created another list with just a few custom columns with no list items --it worked fine for that list.
I also tried clearing local AppData cache which didn't solve it. I'd need Central Admin on O365 SharePoint Online to increase the threshold which I don't have access
to do. Errors received in SharePoint Designer:
"Could not save the list changes to the server." After getting this, I tried to work around
the create new forms issue by saving a copy of the original NewForm as NewForm2 and got the root error that I suspected was underlying it all:
“Server error: the attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator”.
Any ideas for how to create a new list form in SD?

Thanks Alex.
I just found a couple new workarounds instead of using SharePoint Designer:
Method 1: Add web parts to the form pages on the client side:
Go to the list and execute one of these actions depending what form you want to edit: create a new item (NewForm), edit an item (EditForm), or display an item (DispForm).
With the form you want to edit displayed, go to the gear icon and click "Edit Page".
You should now see the web part page show up with "Add a Web Part" as an option.
Add a Content Editor or Script Editor web part.
Add your custom code to either one to manipulate the HTML objects using your favorite web languages.
Method 2: Use InfoPath 2013.
The InfoPath 2013 route appears to work.

List of mat issued

Hi, is it possible to see the list of materials issued to different prod orders for certain period? pls advise.

Dear Yadav,
In that case check in MB51 for the 261 movement and also input the date range and execute and here clcik on for detail list
(shiftcontrolF12) and then clcik on change layout (control+F8) and select the field for amount in local currecy and then check
the results.
The same you can get it in COOIS,in the change layout check for value withdrawn for the list - components.
You can get the value in MCRE also for the issued quantity.
check and revert back.
Regards
Mangalraj.S

List of arch based distros

Can someone give me a list of arch based distros? thanks

http://en.wikipedia.org/wiki/Arch_Linux … vironments
Here's a list of Arch-related distros. There are probably more floating around somewhere.

List of material issued to account assignment

HI MM Gurus,
We are issueing materials against movemnt type 261 (against order) .Say order no 4000001 .
Now I want to see the list of materials issued against that account assignment ,where i can see that ?
Regards
Project Team1

Hi,
You can use ME2K to get a list of Purchasing Documents for that particular Account Assignment and then in ME2M, you can input the list of all the documents you got from previous list. And you will get a list of materials.
Please let us know if it worked. I am not sure about direct report for your requirement.
Thnx.

ICal Print List Hang / Font Issue / Sync Problems...

Okay, here's a couple issues all wrapped up into one thread/post - reason is cause I suspect they may all be tied together somehow, but am not sure.
Sync Problems...
Regarding the Syncing problems, you can find an ongoing thread about @ http://forums.markspace.com/viewtopic.php?t=1632
In short, some of us are having issues with events syncing to our Palm to the wrong timezone, causing them to be an hour off (usually within the new & old DST date change). Yes, all the usual fixes have been tried - pls read the thread noting "adairnet" and ymatto" postings.
Also, in addition to this time issue, I have iCal events that I've deleted in iCal still show up on the Palm after one-way syncing!
Print List Hang...
Every week I print a "list" of events from a certain calendar. The past couple weeks I noticed some lines in the notes field printing on top of each other. Twas odd indeed, but I hadn't had the time to look into the reason. Then this week I was going thru my usual printing proceedure and now iCal locks up, hangs up, crashes, forcing me to force-quit the program. It's usually after I extend the dates beyond 2 or 3 days, but I've not been able to find a consistency. I've redone events thinking they were corrupt with no success.
Font Problems...
After the Print List issue above, I opened my Console program to see if it was reporting anything. At first it indicated that it could not find Helvetica Neue and would substitute it for Helvetica. This put me in touch with some font corruption - so I got rid of those bad fonts and activated Helvetica Neue which got rid of that message. But made me wonder if there are more font problems causing the print hanging & syncing problems. I have FontAgent Pro and do have some font issues that I'm trying to work out.
But the Console is displaying another string of messages every time the Print List proceedure hangs up which I cannot figure out...
2007-04-24 16:24:54.151 iCal[28975] NSATSGlyphStorage inconsistency. Cannot find run storage for character range {138 67} for CTRun 0xDBE87D0. Ignoring the run...
2007-04-24 16:24:55.175 iCal[28975] -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:] called with out-of-bounds range. For apps linked on Tiger this will raise an exception. For earlier apps it will produce this one-time warning and continue with existing behavior (which is undefined).
2007-04-24 16:24:55.176 iCal[28975] * NSThread: ignoring exception '* -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:]: Range or index out of bounds' that raised during delayed perform of target 0xdde58d0 and selector 'renderPreview'
So, all of this is causing me to wonder if the iCal or SyncServices database is corrupt. Is there a way to dig into the iCal db and check for corruption &/or fix it?
Or does anybody have any further suggestions on any of these issues?
thanx.jason.

RedKamel,
The SyncServices folder should be avoided like "a swarm of bees". This article discusses some of the issues that can arise when the SyncServices folder is deleted or modified:
http://docs.info.apple.com/article.html?artnum=301920
Data loss and Data corruption can result from deleting or modifying the SyncServices folder, and that data loss or corruption can be propogated to devices, .Mac, and other applications that sync with SyncServices.
If you have isolated an issue with the other steps in your post, I would recomend speaking with AppleCare before removing that folder.
Hope this helps,
Nathan C.

How to list the Cert Issuer for all servers in a Domain

Hello,
The objective is to list the Server name and Cert Issuer for any Cert found in the LocalMachine\My store on all servers in a Domain.
Once I'd get to a server, probably by PS remoting, I'd issue the following:
dir cert:\localmachine\my -recurse | ? Issuer -like '*'
However, the output is Thumbprint and Subject, but I really need to see the Issuer, or what is displayed in the Certificates MMC under the 'Issued By' column. What I need in my output is the following:
ComputerName       Issuer
Srv1                       Acme Cert Auth
Srv2                       Host1.Acme.Com
Any suggestions would be appreciated.
Thanks for your help! SdeDot

As you might suspect it is even easier than that:
$omputers |
ForEach-Object{
invoke-command -ComputerName $_ -ScriptBlock {dir cert:\localmachine\my -recurse}
} |
select PSComputerName, Issuer
¯\_(ツ)_/¯
Indeed.
=]
Both work great!
Thanks for the response and help Mike and Jrv!
Thanks for your help! SdeDot
Cheers, you're very welcome.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Dynamic List and Security Issue

Hi
I have a Dynamic List Wizard for orders, which the user can click on edit to edit or modify the order and if the user choose "Yes" to submit ( the order form has a submit filed which has Yes / No Values)then the EDIT button disappear and the user has no more control on the record(using show if conditional Region server behavior).
- Now i noticed that when i click on the edit the address bar includes the (www.mysite.com/form.php?order_id=1) now say the order Number 2 is already submitted (still on the list but no Edit button for it) if i write 3 or 4 or any other number instead of 1 at the address bar (www.mysite.com/form.php?order_id=3) the record which has the order number 3 displays on the screen and then you can edit it and when click update the Edit Button becomes Active which destroy the whole concept.
so, how to fix that?

Hi Lorie,
Taking it a step further
interesting that you´re mentioning this -- because I was just in the middle of finding a workaround for the very same issue ;-)
I actually did find a pretty easy solution, which basically goes like this:
1) wrap the whole table *plus* any possibly added hidden fields located below this table in a "Show IF conditional region" behaviour -- but make sure to *not* include the buttons within the "KT_bottombuttons" div in here.
2) as I assume that your "supplier_name" column holds a numeric value which equals the user´s "kt_login_id" Session Variable (which it should !), define the following conditions for the "Show IF conditional region" behaviour:
Expression 1: choose "supplier_name" from the tNG recordset
Condition: ==
Expression 2: choose Session -> kt_login_id
3) tick the Has ELSE option
4) confirm with OK
5) replace the default "has Else" message with something meaningful like "you can´t edit this record !"
Switching to Code view and navigating to the very start of your "Show IF conditional region" should display something like this:
if (@$row_rsqueryname['supplier_name'] == @$_SESSION['kt_login_id']) {
When viewing the modified Dynamic Form in a browser, you´ll note that this solution will indeed display the form instances for all "authorized" records, whereas those form instances which don´t match the required credentials will be replaced with that "has else" message.
BUT !! This solution has one major drawback which I haven´t been able to resolve yet :: when the Dynamic Form goes into Insert Record mode
(means when you click the "add new" link in the Dynamic List), all inner form instances will display that "has else" message.
The only workaround I currently can come up with is to have the List´s "add new" link point to a separate "add_new.php" page that´s going to insert a single record.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

How to Color code the list items if Issue Tracking lists in Sharepoint 2010 SP1

Hi, Can any one guide me in making the list tasks color coded according to the status of the issue.
as if issue is Resolved ( green line ), Active ( red line ) etc.
example as following:
I have read a lot of blogs, but none have step by step guide. a step by step guide will be excellent. Thanks in advance.
http://blog.pathtosharepoint.com/2009/02/26/highlight-rows-in-sharepoint-lists/
http://blog.pathtosharepoint.com/2008/09/01/using-calculated-columns-to-write-html/
etc
Thanks.

Do you have SharePoint Designer 2010 installed?
Open your site in sharepoint designer
click lists and libraries
click the name of your list
in "views" on the right, click "new..." and give it a name.
in this new view of the list, click in one of the cells of the actual list of issues, so that the contextual ribbon at the top will give you all the options you need.
Click "Conditional Formatting" in the ribbon. This will let you pick "row".
Then you just have to define your conditions:
if priority is equal to (3) Low, then pick yellow as the background color. Do the same type of thing to create the other 2 conditions.
Laura Rogers
SharePoint911: SharePoint Consulting
Blog: http://www.sharepoint911.com/blogs/laura
Twitter: WonderLaura
Books:Beginning SharePoint 2010: Building Business Solutions with SharePoint
Using InfoPath 2010 with Microsoft SharePoint 2010 Step by Step

Select list with submit issue when they are referred in report region query

I have a page with a reporting region. Same region also has 3 different list items and depending on the value selected in each item, the report is refreshed. All the 3 list items are "Select list submit with submit"
Out of 3 items, 2 (say item2 and item3) are populated through dynamic LOV using the value in item1.
Additionally, when I select a default "ALL" value in in item1, I ignore values in item2 and item3.
With this background, I am a following issue:
1. I select a value other than Default value in item1 which filters the report.
2. Then I select some value in item2 which further shrinks the reports.
3. Now if I go back to item1 and select the default "All" value, the report is not refreshed with the new values of item1, item2 and item3. But it still shows the report based on value of item2 that I selected in step2.
How do I set the value of item2/item3 to null if value of item1 is default which is "All"
Any word of advise will be a great help!
Thanks,
Girish

Hi,
Make two computations each with the computation text NULL; or
Make one process with code like:
BEGIN
:P1_ITEM2 := NULL;
:P1_ITEM3 := NULL;
END;With the condition "Value of Item in Expression 1 = Expression 2"
Expression 1: P1_ITEM1
Expression 2: ALL
(or whatever the return value of ALL is...remember that this is case sensitive)
Mike

List attachments display issue

I am using following code to display the list item attachments in the "All Items" view for a list.
<td id="ItemAttchment{$ID}{generate-id()}" class="ms-vb" style="width: 92px">
<xsl:element name="SharePoint:AttachmentsField">
<xsl:attribute name="runat">server</xsl:attribute>
<xsl:attribute name="FieldName">Attachments</xsl:attribute>
<xsl:attribute name="ControlMode">Display</xsl:attribute>
<xsl:attribute name="Visible">true</xsl:attribute>
<xsl:attribute name="ItemId">
<xsl:value-of select="$thisNode/@ID"/>
</xsl:attribute>
</xsl:element>
</td>
The issue I am facing is
(a) SharePoint attachment display does not update the attachment name on the list, If the attachment is changed for that list item later.
(b) If I sort the list, the attachments does not get sorted and show up for wrong list items.
Any ideas on how to solve this issue and what would be causing it?
Thanks
Nate

Hello ,
Are you creating new column for that or doing that in default attachment columns ???
I would suggest you to create new column and try to use below code ....
<td id="ItemAttchment" class="ms-vb">
<xsl:element name="SharePoint:AttachmentsField">
<xsl:attribute name="runat">server</xsl:attribute>
<xsl:attribute name="FieldName">Attachments</xsl:attribute>
<xsl:attribute name="ControlMode">Display</xsl:attribute>
<xsl:attribute name="Visible">true</xsl:attribute>
<xsl:attribute name="ItemId">
<xsl:value-of select="$thisNode/@ID"/>
</xsl:attribute>
</xsl:element>
</td>
Best Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful

VF04 : Billing Due List ( Order related ) issue

Hi
I have created Billing document with reference to Sale Order.
when I check the Billing Due list ( VF04) system is showing Sales Order Number
but my sale order entire quantity already created billing document and also when i check the Sale order Header level Status
Order related its showing Partially invoices
I have maintained the copy control VTFA - pos/neg Qty = "+"
Kindly guide me how to avoid those Sale order numbers in billing due list.

Hi
Thanks for Reply.
The issue is solved
Solution : I have changed the Billing Relevance as "B: in Transaction Code: VOV7

App List Remembering Location issue

I can't seem to figure this out. Before the Froyo update, I was able to scroll through my app list, click on an app that starts with say an "L", exit the app, go back to my app list and be in the same position of the "L" apps. But now, after the froyo update the app list always resets to the beginning of the list starting with "A's". It's more annoying than an issue and a coworker got the Epic from Sprint and his phone works fine. Any ideas on how to get the app list to remember my location when scrolling and exiting? Thanks!!

hello. I also noticed this as well right after the 2.2 update. from what i have noticed is that if you open the app drawer and scroll to an app and select it and then when its closed the app drawer will reopen at the top of the drawer. but if you open the app drawer and scroll to any point in the app drawer and then close out and return to the homescreen and then again reopen the app drawer it will go right back to the point that you scroll down to. I`m assuming that once you select an app it will restart the app drawer from the top but by not selecting an app it assumes that an operation started hasn`t completed yet and remains in the position last left but thats just an uneducated guess at best. i have yet to find a setting that allows for customization of the app drawer.

Verizon iPhone 4s Contact List/International Call Issues

Hi, my wife upgrade her ATT iPhone 3GS to a Verizon 4S. Everything went well except with anumber of issues that all seem to deal with how the phone interprets phone numbers. Here are the symptoms:
– When a phone number is dialed from Contacts, Verizon answer and says you are not able to make international calls
– In the contacts, phone numbers are displayed as 9165554444 in stead of (916) 555-4444. Even though on the orignial phone and her laptop they display correctly
– When some calls or texts from a number on the contact list it is not identified even though the number matches those in the contact
– When going to Settings > Phone the phone's own number is diplayed as 9165554444 in stead of (916) 555-4444.
Some solutions that begin to look promising:
– if you place +1 in front of the existing nmbers they appear in the proper format, +1 (916) 555-4444, and dial correctly but this would require a retyping of many hundreds of numbers and doesn't totally fix the contact identification issue.
– turning off "International Assist" helps in some of the issues above but not all, and I have always had this on for previous phones, both hers and mine. I have an iPhone 4 with iOS 5 and have the exact settings as she does and have non of the problems.
Anyone have ideas about a solution? I have heard of at least 4 other people having the same problem on different forums.
Richard

Here is something I found in another thread that fixed all the problems ...
Here's another fix that I found in a different thread that worked great for me and is much simpler:
https://discussions.apple.com/message/16380402#16380402
The summary:
Here is the summary of the steps I took to correct the issue:
1) Open the Phone and dial *228. This is a Verizon over-the-air programming number.
2) When the system answer press 1 for "Program or activate your phone"
3) Wait for the call to disconnect. You should get a prompt stating something like, "Settings updated."
4) Open the Task Manager and kill the Phone, Message, and Contacts Applications
5) Wait a few minutes (I waited 3 just to be extra safe)
6) Open the Message App to verify the fix.
If you are still broken, kill the Message App again, then reboot your phone.
Good luck!
Ernie
Caller ID not working on iPhone 4S

List of Goods Issues Report by Person

Is there any standard SAP report/tcode that lists goods issues performed by any person for a particular time period? Please suggest. Thanks

Hai;
Use MB51 .there have so many options for getting the goods issue details. Give movement type 261 and User name .there is also an option for giving posting date where we can give from and To period.
Hope this will help you

My list of Arch issues

Similar Messages

Maybe you are looking for