My Location now 1000 miles after swapping xfinity modem - @ComcastChirag-K.

Just installed a replacement Xfinity x1 Modem/router.  Since doing so my location for all location based web sites/services has me in Peoria,  IL not West Orange, NJ.  How can I fix this?  The net effect is that my google search results give me Weather, TV Listings, Shopping/Stores near me relevant to Peoria IL not West Orange NJ. This happens on my Mac and PCs in Chrome, Safari and Firefox Browsers and on my Android phone & tablet when connect to my home router. Thanks for your help Attention - ComcastChirag-K.  

  Google requires the MAC address for geolocation over wifi.  It allows CONSIDERIP as a fall back.  It your Gateway's MAC is tied to a distant location, KEEP swapping Gateways until geolocation works. It's the most practical solution.   OverviewThe Google Maps Geolocation API returns a location and accuracy radius based on information about ... WiFi nodes that the mobile client can detect.  Request bodyThe request body must be formatted as JSON. The following fields are supported, and all fields are optional:...considerIP: Specifies whether to fall back to IP geolocation if wifi and cell tower signals are not available. Note that the IP address in the request header may not be the IP of the device. Defaults to true. Set considerIPto false to disable fall back.wifiAccessPoints: An array of WiFi access point objects. See the WiFi Access Point Objects section below.{
  "considerIP": "true",
  "wifiAccessPoints": [
    // See the WiFi Access Point Objects section below.
}WiFi access point objectsThe request body's wifiAccessPoints array must contain two or more WiFi access point objects. macAddress is required; all other fields are optional... An example WiFi access point object is shown below.{
  "macAddress": "01:23:45:67:89:AB",
  "signalStrength": -65,
  "age": 0,
  "channel": 11,
  "signalToNoiseRatio": 40
}

Similar Messages

  • I have just launched icloud on my windows 7 laptop, and stupidly added my outlook email contacts - ie addresses to my icloud contacts. So, there are now 1000's of contacts.  How do I delete these and preserve the original telephone and address contacts,?

    I have just launched icloud on my windows 7 laptop, and stupidly followed the instructions and added my outlook email contacts which come up as email addresses to my whole icloud contacts. So, there are now 1000's of contacts which have now appeared on my iphone.
    How do I delete these email addresses and preserve the original straightforward names with telephone and address contacts?  I am not very technical and am frustrated in my attempts to rectify the situation.
    Thanks

    For your contacts go to settings on your phone - mail contacts and calendars - scroll down to contacts and change display order to the one you want ( you can also change sort order, but ususally people prefer last name first and see if that is what you have).
    For your yahoo emails go on your computer open outlook
    In Outlook 2010, choose File > Accounts.
    Click account settings and confirm the command by clicking "Add and remove accounts or change existing connection settings."
    Select account and click "Change."
    Click "Advanced."
    Click "More Settings."
    Click the "Advanced" tab.
    Enter "7" in the box to the right of "Remove from server after."
    Click OK.
    Close Account Settings.
    If you have outlook 2007
    In Outlook 2007, choose Tools > Account Settings.
    Click the account you wish to edit and then click Change.
    Click the "More Settings" button.
    Select the Advanced tab located across the top of the window.
    Select the "Leave a copy of messages on the server" option.
    Select the "Remove from server after" option.
    Enter 7 in the box to the right of "Remove from server after."
    Click OK.
    Close Account Settings.

  • Where is the find/replace-special feature located now?

    Where is the find special feature located now?
    I used to be able the search for "<space><tab>" and replace with "<tab>"
    I can no longer locate that feature and if I try to paste it into the find dialog, it says that no instances are found although I might be looking at several.
    I made extensive use of this and "Convert text to table" and "convert table to text."
    Ars-Technica reports that many of the "advanced" features have been removed. If that's correct, is Apple trying to relagate it's apps to the "Un-professional" level? Are we going to end up looking elsewhere for the features we had come to rely on? Granted, some of them still didn't work as expected, but the ones that did, I really made a **** of a lot of use of, including, but not limited to mail merge, which I'm told is also gone.
    Why can't apple just keep the great, if not at least standard, functionality intact? Give users a preference to hide the "Standardized" features if they are going to confuse them. Note that I'm not even going to say "professional" here because a robust find and replace to me is considered common place. Find and replacejust text is simply dumbed-down and, for me is a bit of an insult, especially after hemming me in to not being able to edit my documents once I open them in iOS and killing iWork on my machine after the update - sure the apps are there, but they crash complaining of a missing library.
    On that note, if anyone knows how to fix that so that I can keep working with iWork '09, I'd be relatively happy to be able to work with some of my old work that won't function in the new Pages.
    Any help on any of this is greatly appreciated.

    Pages 5 has over 90 other features removed:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=b14426a2c5af2 65f2213d98ee45f08d7&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Export your Pages 5 files to Pages '09 or Word .docx and trash/archive Pages 5.
    Then rate/review Pages 5 in the App Store.
    Peter

  • I just upgraded to 9.1.4, and am being asked for the serial number from my packaging, which unfortunately is 1000 miles away at the moment. Any way I can get it from Apple or something? Thanks.

    Just upgraded to 9.1.4, now being asked for a serial number from my packaging, which is 1000 miles away at the moment. Any way out of this? Thanks.

    Add me to the list. This is a nuisance.
    Fortunately, if i click on cancel, Logic will start the next time i run it without asking me. (But it asks again the third time i run it, and so forth - really strange!)
    Please report this bug to Apple! http://www.apple.com/feedback/logicpro.html
    Fox

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • I moved iTunes folder location, now all my personal song ratings and playlists are gone.  How can I get them back?  All the iTunes files are intact, just in a new location.  Running iTunes 11.1.5.5

    I moved iTunes folder location, now all my personal song ratings and playlists are gone.  How can I get them back?  All the iTunes files are intact, just in a new location.  Running iTunes 11.1.5.5 on Windows 7

    Put everything back the way it was.
    Them move the folder correctly.
    http://support.apple.com/kb/ht1364

  • I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

    I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Location sensors not found after 3-7 days work

    Good afternoon. I want a permanent job location sensors in my own program. Everything works fine about 3-7 days. But then SensorManager stops include location sensors. I make sure with it when I open any other program from windows Store using location sensor. Location sensors start working after the restart windows or off/on option "Turn on the windows Location platform" in Control Panel. There are other software developers on this tablet with this problem. Is there any way to restart sensor location software programmitically? Or newest drivers?
    sorry for my english device:Lenovo thinkpad 10
    Hardware ID: Sensors\BcmGNSSLocationSensor_LNV_4752_0000
    Driver: 20.18.1477.17Windows: 8.1 Bing 

    That driver version (20.18.1477.17) is the latest one listed on the Lenovo Support page:
    http://support.lenovo.com/us/en/products/tablets/thinkpad-tablet-series/thinkpad-10
    I am currently running the Technical Preview of Windows 10 (build 10166) on a ThinkPad 10, and I see that I have a newer version of the Broadcom 4752 driver: 20.22.405.18. That may be part of Windows 10.
    When I was running Windows 8.1 on the ThinkPad 10, I also occasionally saw the same issue: the location sensor would stop working. It might also be caused by the tablet being indoors, and losing contact with GPS satellites. Does the tablet restablish contact if taken outdoors, or is a reboot the only way to get the sensor working again?
     

  • Where is the SE Aino Support located now?

    Hi
    Just out of curiosity, I was wondering where the Sony Ericsson Aino Forums are located now, I understand that the actual SE Aino Section was deleted but where would I post for assistance if I do encounter a problem on my aino?
    Also, a suggestion, Add a "Entertainment Unlimited" topic in the forums for the Aino, Satio, Vivaz, yari and the other phones that were originally in that catagory
    Thanks

    Under this one, or under Phones.

  • Slow requests after swapping staging and production slots

    Hi!
    I'm sometimes experiencing an issue where swapping staging and production slots creates a first slow request on the production (and sometimes on the staging) URL. I thought the whole point of staged deployments were to eliminate slow requests after deployment.
    When creating a simple Hello World Website a normal load time for the website could be 100ms, but after swapping it sometimes increases to over a second.
    I also tested this with a bit more complex websites and the first request after swapping sometimes exceeds ten seconds, which I find unacceptable.
    I am measuring the request times with my browser throughout the swapping process. The websites I tested this with were Standard Websites which had Always-On enabled. The staging slot was called before swapping.
    Am I doing something wrong? Why are first requests sometimes so slow? Or is this normal behavior?
    Thanks in advance for an answer!

    I'm still able to reproduce the issue.
    I just created a new Website (Web App) with the name swaptest and a staging slot named staging. Then I created a git repository in the staging slot and this is the repo I am always pushing to.
    After that, I created a basic node.js Express app via the generator and pushed it towards the staging slot. After I loaded the site successfully on the staging slot (which sometimes takes a few seconds, but is fine since this is the warm up) I swap the slots
    via the new portal. Most of my swaps were fine, however one of the swaps was slow again. See the screenshot for a very long request time (9 seconds). I already loaded the page once on the staging slot, so it should have been warmed up already.
    Screenshot: http://i.imgur.com/HXfDJr8.png
    Website: http://swaptest.azurewebsites.net/
    Staging: http://swaptest-staging.azurewebsites.net/
    Timeframe: Within the last 30 minutes.
    Please let me know if you need more information,
    Thanks,
    Peter.

  • Photoshop elements 12 stopped working after swapping mainboard

    Hi everybody!
    On a Win 7 Pro PC the PSE 12 Photo Editor stopped working after swapping the defective mainboard.
    I tried uninstall and reinstall as admin, with disabled security software.
    We always get the welcome screen from where you launch organizer or editor, of which only the organizer works.
    Launching the editor directly from the application folder or from within the organizer fails too.
    Also the newest update installed, does not change this behaviour.
    I'd appreciate your suggestions!
    Dirk

    I am having the same problem and tried calling tech support was on hold for an hour and a half its
    driving me crazy trying to figure it out.  Did an online chat which was no help what so ever.
    If I find out something I will let you know for sure...

  • HT201274 my device have now 8 hours  after i did Erase All Content and Settings doing erasing , is this normal

    my device have now 8 hours  after i did Erase All Content and Settings doing erasing , is this normal

    Something has gone wrong, as this should have happened almost instantaneously. Turn your phone off, then force it into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • Where is the apps update located now?

    I'm using itunes 8.2.1 and iphone 3.01.
    can someone tell me where is the apps update located now?
    I don't even see an apps icon in the left column of itunes anymore.

    I don't even see an apps icon in the left column of itunes anymore.
    iTunes presf -> GEneral.
    Tick Apps.

  • Os lion crashing on mac pro now and then after startup trying to open first app

    Os lion crashing on mac pro now and then after startup trying to open first app like safari, nothing seems to respond then I restart it and its ok. Then after many uses it does it again.

    Take it to an Apple Store.
    Claypool Addict wrote:
    I've tried holding r, command + option + p + r, option + r, c.
    That command does nothing.
    Try option/command/R
    Don't press it until you hear the chime, don't release it until you see recovery loading, don't press other random combinations unless you know what they do.

  • My MacBook Pro showed Spinning weel (SPOD) and when I tried to reboot took ages to restart (20 minutes)now shows SPOD after every command and is extrmely slow

    My MacBook Pro showed Spinning weel (SPOD) and when I tried to reboot took ages to restart (20 minutes)now shows SPOD after every command and is extrmely slow

    See if you can download and post an Etrecheck report:
    http://www.etresoft.com/etrecheck
    Ciao.

Maybe you are looking for