My location....

How can I change my location to my accurate location! Not my neighbors house?

I'm concluding that you have a WiFi-only iPad. If that's the case, there is nothing that you can do except to be patient. It took nearly a year for me! Unfortunately, the WiFi router database is a deep dark secret.
In my case, my neighbors and I did a bit of experimentation when I had the problem. By powering and unpowering routers in the neighborhood, we could make the location jump all over to every house except mine!

Similar Messages

Stream 8 tablet location does not work on T-mobile broadband

On my HP Stream 8 tablet, location works fine with GPS only (GNSS on; Mobile Broadband, Wi-Fi, and Bluetooth off).
However, if I turn on Mobile Broadband and connect to T-Mobile and turn off GNSS (or GNSS on inside where there is no GPS signal) and keep Wi-Fi and Bluetooth off, the location gives very odd results. Last week the map showed Phoenix as my location (I am actually located in San Francisco). This week, it gives Brentwood or Clayton, CA, both more than 30 miles away.
HP tech support said call T-Mobile. T-Mobile said they had occasionally seen equally odd locations.
I went to a nearby T-Mobile store. They had a Samsung Galaxy Tab 4 which always gave a correct location, within 100 feet using T-Mobile alone. Manually moving the map to a different location in an attempt to confuse it and turning it on and off, it would still find the correct location. No surprise there, my three year old Virgin Mobile LG android cell phone does just as good a job at finding locations.
(The T-mobile store also had an iPad Mini 3 that I was able to confuse. On T-Mobile alone and clicking on My Location in maps, it produced a grid that was blank except for a line saying that it was unable to find a location, no info or link to what to do next. The T-Mobile store did not have a Stream 8. The Microsoft Store has a Stream 8 but it is not connected to Mobile Broadband.)
Does anyone else have this problem? Is my unit defective? There are times that a GPS signal is unavailable and a T-mobile broadband signal is available, and it seems that this unit should be able to find a location at least as well as my cell phone.
Thanks.

I see the same basic results, wifi=off, bluetooth=off, gnss=off, t-mobile=on. Open win8.1 map-app shows my location in LA south of the 101/110 junction. I'm in SF Bay area near San Jose about 400 miles away. Turn on wifi and map-app shows me at my real address. With t-moile only, opened win8.1 IE, went to www.bing.com/maps location also shows LA.
My only t-mobile account is the stream8 free 200mb/month data plan, don't think they have my real address anywhere. My t-mobile "phone" number is 720 area code in the Denver area. No idea why middle of LA is the t-mobile location. Must be a "feature, not a bug".

Delete file from original location and when copied size of file increases.

hi !
I have 2 exe's both of 1.15MB which I want to move to another folder. The files are copied to the folder but the size of exe increases to around 350MB each. What can be the problem ?
BufferedOutputStream bos=new BufferedOutputStream(new FileOutputStream(filename));
int o=bis.read();
do{bos.write(o);}while (o!=-1);
boolean del=this.fpara.delete();
System.out.println(del); Also, the file is not deleted from the original location even though I have used the delete function. The last line produces null output.

And do follow coding conventions
{color:0000ff}http://java.sun.com/docs/codeconv/html/CodeConvTOC.doc.html{color}
If your original source is all jammed up like the snippet you posted, I'm not surprosed that you can't spot your mistakes.
db
Edited by: Darryl.Burke on Mar 9, 2008 12:40 AM

Delete File from URL located on HTTP Server.

Hello All, could you anybody help me with my Problem. I need to delete some File in URL located on HTTP Server. The File was created via using of the Function 'DP_CONTROL_SEND_STREAM_TO_URL'. Any Times I need to delete this File from the url Location, but I cann't find any Functions or Method of any Class (GUI 6.20) to realise that. I read lot of very good Blogs from Thomas Jung about HTTP classes, but I cann't find somthing relevant for me...
Sincerely Yours,
Lubomir

Hi,
You can try with GUI_DELETE_FILE and give http location in FILE_NAME
or WS_FILE_DELETE.
I am not getting any CNDP function module for your purpose.
Hope you will get sucess..
Thanks,
Chetan Shah

When i login to pc or some another iphone to find my iphone Web it show me wrong location

When i login to pc or some another iphone to find my iphone Web it show me wrong location.
and whn i check my location to map tht show me correct.......
Today i wast my 1Hr to search my friend va find my iphone it show me wrong loction 4km wrong location...
ThankQ

Try signing out, then back in on your phone: Settings>Store>Apple ID, tap the ID shown, sign out, sign back in. If that doesn't work, reset your password here: https://iforgot.apple.com.

Manage-bde command is not generating recovery key on network location

Hi,
I am trying to save the recovery key to the network share location and start up key in the USB drive while enabling bit locker.When the OS drive gets encrypted, the default folder for recovery password shows that it contains 1 file but not getting anything
inside it when i checked the properties of the folder.
i have already changed the group policy as "choose default folder for recovery password".
I am using the command to enable the bit-locker as "manage-bde.exe -on C: -rk
<network location to save recovery key> -sk <location of the USB drive>
-rp to enable the bit-locker. It is generating the start up key in the USB but not the recovery key on network share.
Can anyone suggest what i am missing or what else i should do to generate the recovery key on network share.
Does manage-bde process be able to save the recovery key on network share or it hand over to some other process to perform this task.
Thanks
Gaurav Ranjan

I got you Manoj, but I want to ask you one think that what if i lost the startup key or my USB stick. I have my recovery key on the network share. In order to log-in my machine I need the recovery password. From where i will get the recovery
password(48 digit). Surely from the recovery key on the network share. So how can i get the recovery password if only we have the recovery key.
I know both are different in context. Both are two different thing. I have lost my USB stick along with the recovery password and I have to log-in my machine. How can i do that i want to know that. Do there is any method to get recovery password from the
recovery key on network share. I have retrieved the recovery password when the recovery key in AD. But this time it is on network share.
Also one think which I need to solve is that the manage-bde -protectors -add command creates a new .bek file along with the older one. So the .bek file which get shown at the time of the start up of the machine is different from that stored in the network.
So i am getting confused as which .bek file is for which machine and hard to retrieve the password.
Is there any method to store recovery key on network without the -protectors -add command line so that both the .bek file should be matched and can easily be known for indiviual machine in an OU. As if both the .bek files will be different it would be difficult
to to retrieve the recovery password for the machines.
Please do inform if you need some more information about the scenario if i missed something.
Thanks
Gaurav Ranjan

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Power view in SharePoint - Changing the default save location?

Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???

Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Date Wise and Storage Location Wise Stock Qty & Value Report......

Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
Yusuf

Hi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK

Stock on posting date -storage location and batch wise

Dear All
I need to developa report exactly same as MB5B but with storage location and batch wise.
We need storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
I have gone through some history tables like MCHBH and MBEWH.
But all the history tables are having fileds for period wise but not date wise.
Any focus on this?

You have to read the coding of MB5B to see how SAP is doing it.
The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

Storage location wise Opening/Closing Stock on posting date (mb5b)

Hi,
Report mb5b gives opening stock and closing stock as on date. In the selection screen, if we do not enter specific storage location then the opening/closing stock is displayed as sum of all storage location stocks for a given material.
Where as if we enter storage location, it gives storage location specific output. (with Storage loc/batch stock radio button)
My requirement is - without entering storage location in the initial screen, the system should display storage location specific opening/closing stock.
To get this, presently I need to execute mb5b transaction individually for every storage location.
Warm regards,
MS

Hi Madhavi
This report you can have in T code MC.6 and another t code for opening and closing stock in t code MC.9
Regards
Vivek
-- Reward if helpful
Edited by: Supergene on Feb 28, 2008 3:17 PM

Opening and closing Stock report at Storage location level- date wise

Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
Sam

Do I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam

Help - Class name and descriptions for a function location.

Hi Guys
i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
please help.
many thanks.
seelan.

sadiepu1 wrote:
When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
Did you use facebook to log in?
Verizon will not be able to help you retrieve any of the information you need. You will have to contact Zynga.

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

Can 2 diff itunes in one household have one central music location?

Hi everyone,
my husband and I each have iTunes on their (Win based) computers. (it syncs with our phones, outlook, etc).
currently, our music library is divided between the two computers - which is not ideal...
i was hoping to move all the music to one location, that we could both access and play.
any ideas on how to do this?
thank you!

How to use multiple iPods with one computer
http://docs.info.apple.com/article.html?artnum=300432
Using iPod with multiple computers
http://docs.info.apple.com/article.html?artnum=61675
I don't have an iPhone so I am not sure if the above article apply directly or not.
Patrick

My location....

Similar Messages

Maybe you are looking for