My lock button all of a sudden just got jammed. My phone is under warranty but I don't know how to get it fixed, My lock button all of a sudden just got jammed. My phone is under warranty but I don't know how to get it fixed
My iPhone 4S lock button is jammed. My iPhone is still under warranty but I don't know how to get it fixed. Someone please help me !!
Make an appointment at the Genius Bar at your local Apple Store. Or, see the information here:
http://www.apple.com/support/contact/
Similar Messages
-
After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.
The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards. -
My computer just got back from getting fixed, they wiped out everything. Now I cant authorize my i phone purchases because it says Its been done by more than 5 computers? If you can please help. Thanks
Use the Deauthorize All function documented in the article you asked this question from.
(73313) -
Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.
This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording) -
Hi, I just got an iPod Nano 1st generation and I plugged it into my computer and open iTunes but it never showed up in iTunes. So then I updated my iTunes to the latest version but it still didn't show up so is there a way you all can help me A.S.AP.
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
Help, I can't sync my apps on my 3GS phone to the newest iTunes software. On top of that, my purchased apps under my apple ID seem to have disappeared! I want to transfer them to an iPhone 4S I just inherited, but I can't! Thanks!
How did you get iOS 6 with an iPhone 3GS? I need help updating my software on my iPhone I have iOS 4 and can't figure out what to do.
-
I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.
Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.
-
Hi, I just got done installing IOS 7 and now whenever I send an i message my email shows up on the other phone. My phone number is greyed out and doen't give me the option to click it. Please help!
Where is the phone number on the iPod?
If you have an iPhone with iOS and use the same ID for Messages and FaceTime as on the iPod the iPhone's phone number will be listed for Messages and FaceTime on the iPod.
If you changed phone numbers on the iPhone, sign out of Messages and FaceTime and then sing back in. Then do the same a little while later on the iPod.
For some info see:
iOS: About Messages -
my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.
Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad. -
Just got the Iphone 4s in June, now everytime I go to download an app, it will not download. When I go to get updates, the apps will not download. I tried, reinstalling, resyncing, turning the phone off and on, what is happening? How do I fix this?
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I have an ebook in ITunes that is showing up under Music>more>Genres>Audiobooks, and I would like for it to go in the IBook app. I just added to my phone, is there a way to add this book to that app.?
Sioux7 wrote:
I have an ebook in ITunes that is showing up under Music>more>Genres>Audiobooks
Audiobooks go in Music, not ibooks. Is the book you are talking about not an audiobook but an .epub or some other format where you read text? -
Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...
It looks like ocz is aware of the issue and trying to address it via firmware:
http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
It's a shame because apple is clearly the party that changed something. -
I just used "Erase" via "Find my phone" to erase and reset my MBP. It's caused my MBP to be locked. I entered correct 4 digit PIN and it seemed to accept it, but it won't allow use of the internal drive. Yosemite loaded. Anyone else had same problem?
Greetings Fraser Alexander,
Erasing your Mac shouldn't harm your internal hard drive but erasing does clear Yosemite and everything else off of it. Are you not able to restore it with your Time Machine backup?
iCloud: Erase your device
If you erase then find your Mac, you can restore the information on the Mac using a Time Machine backup. For more information, see the Apple Support article Recover your entire system. If you set an EFI firmware password on your Mac before it was lost, then erase it and later find it, you may need to take your Mac to an authorized repair center to unlock it before you can use it again.
OS X Yosemite: Recover your entire system
Take care,
Nubz -
I just got my new iphone 5 and had to upgrade my mac (version 10.5.8) version of i tunes. Trying to install and it says i need 10.6.8 or later. What can I do to get this phone installed?
Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading... -
How can I get my HP Officejet Pro 8100 to work.
I'm using an iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.Greetings paulr.paulr,
Welcome to the Apple Support Communities!
I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know.
OS X Yosemite: Printing troubleshooting
Cheers,
Joe -
I've been using Photoshop for years, but tonight I ran into an issue that I don't understand. I was working with a file that I had been working with for months. I added a new image and resized it to fit as I needed just as I always have (select layer with image > EDIT > TRANSFORM > SCALE.) All was working fine. I added a second image to the file I was working on (I added it by dragging it into the file from another window just as I had added the first image.) However, this time when I tried to select EDIT > TRANSFORM > SCALE this option was not available to me. Only the FREE TRANSFORM PATH or TRANSFORM PATH options were available. When I selected the SCALE in the TRANSFORM PATH menu (just to see what would happen) it started to scale a completely unrelated layer that DID have a path to it. However, the layer of my image was still selected and NOT the layer with the path. This image layer has no path even on it or around it in any way. I tried to select the folder layer and the same thing happened. It selected this one path and tried to scale it. I selected the layer I just previously scaled and tried to scale it again and it will only allow me to select the transform path option. I selected it to see again what would happen and once again it selected this completely unrelated path on a completely different layer. WHAT????? This makes absolutely no sense! I have tried restarting both my computer and PS and it won't stop happening! I really need to get this file finished and uploaded to my developer ASAP so I really hope that someone has some insight as to why this is happening.
hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
Javascript to save form in Acrobat X Pro
I have developed a return authorization form using the form function in Acrobat X Pro. I would like to insert a "save" button into the form that would save the pdf form into a specific folder using the number field in the form as the file name. I'm
-
I need help, my hangman works, but I want the hangman to show a GUI shape for each wrong answer. help me out! thanks import java.awt.*; import java.awt.event.*; import java.applet.*; import java.io.*; import javax.swing.*; public class Hangman extend
-
Thinkpad SystemUpdate - Language settings for downloaded utilites?
There seem to be slight troubles in the way how Lenovo's SystemUpdate keeps (or does not keep) track of regional, language-dependent settings. Scenario: Installed a clean Windows (english, non-T61-specific) XP SP2 on a T61, copied and installed T61-s
-
Canon LBP5050 doesn't work OSX Maverick
I update my imac OSX Maverick. I can't get printing my Canon LBP5050. I install new driver but nothing happend. I try delete printer and install again but nothing works. Have anybody get working this model printer? Please can someone help me?
-
Can't open NeoOffice, need java update, do update, can't open, same reason
Try to open NeoOffice. Told I need java update download latest update try to open again get same message that I need update.