My lock button isn't working this is the second time my iphone 5 had a major problem....not fair these phones are not cheap..anyone else with this problem
If I'm force to change phone I want one 6.1.2 or lower the new ones drain batteries in my opinion
It doesn't matter what you want. You will be given a replacement phone and whatever iOS is on the phone from the factory is what you will get. You don't get a choice. iOS 6.1.3 has been out for quite a while; it is VERY likely your new phone will have this version of iOS.
Similar Messages
-
Cannot use 2 optical drives (Apple Super drives) at the same time on my iMac after downloading OS X 10.8.5. Reported to Apple Care. Anyone else have this problem?
Cannot use 2 optical drives (Apple Super drives) at the same time on my iMac after downloading OS X 10.8.5. Reported to Apple Care. Anyone else have this problem?
-
HT201210 This is the second time my iphone has had to restore, how can I stop this from happening?
My phone completely freezes and I get the itunes update icon. Can I change a setting on my phone to stop this from happening as I am unable to use my phone at all when it does this and sometimes when I have gone to update I just keep getting error messages.
There is no setting to stop this from happening, which means there is a major problem with your iPhone and the reason you can't use your iPhone at the time.
If you restored from your iPhone's backup, try restoring as a new iPhone or not from the backup. If this occurs again shortly thereafter, the iPhone has a hardware problem. -
Own two iphone 5s with ios 7.0.2 loaded. Both phones do not allow camera video to start. Anyone else with this issue? Any suggestions how to correct?
Hello markittwo,
Thank you for details about the issue you are experiencing with recording video after upgrading to iOS 7.
The first thing I recommend is quitting and relaunching the applications on your iPhones:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/HT5137
If you are still seeing the same issue after quitting and relaunching the Camera app, I recommend restarting your phones and then resetting if recording video still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhones:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My lock button isn't working. I am using the assistive touch thing right now. Can I get my phone fixed or replaced?
Rice is hit or miss but if you can (assuming you live in a home with a furnace) sit it up with the speakers facing down on an air flow register for about 10 minutes. The heat from the furnace will not harm the sensitive components and will dry the phone out nicely including the display layers. DO NOT USE a hair blower! The iPhone is capable of drying out much more easily than phones with removable backs as the iPhone while sumbermeged in liquid (for a short time) will take on limited moisture hence can be dried and keep on keeping on. My dauhter dropped her iPhone 5 in a toilet and it was fine after spending 24 hours in rice and 10 minutes on the air register while the furnace was producing heat.
One last thing. DO NOT POWER ON the phone until the drying out efforts have been completed and certainly DO NOT plug it in. -
Half of my lock button isn't working.
I bought my iPhone 5 on December 26th and it has been in an otterbox since I bought it, and I have never dropped it. If you tap the back of my phone right about the apple logo you can hear a slight rattling noise and the right half of my lock button isn't working. But if I press to the left of the middle of it, it does work. I have Applecare, the one problem is the nearest Apple store is 2 hours away. What should I do?
Thank you!You can also call them to have your phone serviced:
Apple - Support - Service Answer Center -
My lock button isn't working and I completely forgot that, I turned off my phone to restart it and now I cant turn it back on, Any suggestions?
You need to get the on/off button repaired.
You can try connecting the iPhone to a power source which should power the iPhone on. -
lock button got stuck or broke.. this is the second time this has happened and my phone is refurbish. do i have to pay the replacement cost?
Warranty on a refurbished unit is 90 days or the remainder of the original phone's warranty, whichever is longer. If you're outside this period, you will again pay the replacement fee.
-
My iPhone 4s is dark, this is the second time. The first time I was able to get it back up and running by plugging it into my PC. However this time it has been plugged in for an hour or more and nothing. There was still at least 70% charge left on it when it went dead. I have pressed the sleep and start button separately and together. It said that I did not have much space left this morning so I deleted Apps and photos but there was still space. Just two days ago it was losing power even though it still 55% charge left so I plugged it in and it seemed to gain power. Any suggestions on the problem?
Sounds like faulty battery. Make Genius reservation and take to Apple for quick (minutes) free battery diagnostic testing. If you have Warranty or AppleCare the problem will be covered.
-
Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD displayafter going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support
-
I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you seem to be going down the tubes slowly but surely..
its not apple going "down the tubes" its that you have windows junk. These opinion best left at apple.com/feedback
you need to completely uninstall itunes and all components
see these for help
http://support.apple.com/kb/HT1925
http://support.apple.com/kb/HT1923
Peace, Clyde -
I recently purchased the 16GB 5s. I didn't notice this before, but when I attempt to take a photo with the flash in the "on" position, the flash only works sporadically when I take a picture with the phone vertical. Anyone else with this problem?
I recently purchased the 16GB 5s. I didn't notice this before, but when I attempt to take a photo with the flash in the "on" position, the flash only works sporadically when I take a picture with the phone vertical. Anyone else with this problem?
-
I have a LG Lucid phone and after the recent LG software update, I have not been able to import my Outlook mail. Anyone else with this problem?
Connecting through email is extremely important these days donhinson. Let's get this fixed today. I first recommend removing the email account and readding it back to your device.This will help reset the settings. Listed below are steps to check the email settings, outgoing, and incoming servings.
1.From a home screen, select Apps (located in the lower-right).
2. Select Email.
3. From an Inbox, select Menu ( located below the display).
4.Select Account settings.
5.Select Account display name.
6.Enter an name then select OK.
7.Select My name.
8.Enter the name then select OK.
9.Select Signature.
10.Select the desired signature.
--To add a custom signature, select New signature (plus ( ) symbol located in the upper-right), enter the signature then 11. select Save.
12.Select Retrieve interval.
13.Select one of the following:
--Manual
--5 minutes
--10 minutes
--15 minutes
--30 minutes
--1 hour
--2 hours
--4 hours
--8 hours
14.Select Maximum emails to show.
15.Select one of the following:
--20 messages
--40 messages
--60 messages
--80 messages
--100 messages
--200 messages
--500 messages
--1000 messages
16.Select Delete from server.
17.Select one of the following:
--Never
--When I download from server
--When I delete from device
18. Configure the following as appropriate:
-- Enabled when a check mark is present.
--Forward message
--Forward attachment
19. Select Change login settings.
19. Ensure the following settings are correct then select Save:
--Username
--Password
--Email address
--INCOMING SERVER SETTINGS
--POP3 Server
--Secure type (e.g. Off, SSL, TLS)
--Port number
--APOP secure login
-- Enabled when a check mark is present.
--OUTGOING SERVER SETTINGS
--SMTP Server
--Secure type (e.g. Off, SSL, TLS)
--Port number
--Authentication. Enabled when a check mark is present.
--Username
--Password
I hope the information above is helpful.
KinquanaH_VZW -
my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?
Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish -
Safari crashes and shuts down every time I visit Grays Online. Anyone else with this problem?
Safari crashes and shuts down every time I visit Grays Online. Site usually flicks off in under a minute. Anyone else with this problem?
The website may need more memory than you have available if you are running iOS 5.1.1 on the original iPad. Try some basic troubleshooting steps. Maybe quitting all apps might be the best thing to try.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit ALL apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Maybe you are looking for
-
How to use stored package in form.
hi i created the following package but now i want to use the following code in form how could i use?. create or replace package body mahi is -- Write a MIME header procedure write_mime_header ( p_conn in out nocopy utl_smtp.connection , p_name in var
-
What charger do i need for my mid 2010 Macbook?
http://tinyurl.com/mdbj3vn <-- Would this one work? I'm having trouble finding one and most of the listings on Ebay say "for Macbook pro" in the title.. My charger is shorting out and I'm afraid it will die on me soon. Exactly what kind of charger do
-
Document Library document delete using Event Receiver
Please suggest your solution for the following scenario: A user deletes the document from document library and an e-mail has to be triggered to the admin notifying the information about the document deleted recently along with the option to Approve\R
-
How can I import contacts from iCloud to iCal in snow leopard?
After upgrade software on iPhone (with iCloud) contacts of iCal on MAC (Snow Leopard) are no mre sync... with iPhone.... As now I have all updated contacts on iCloud, how can I import contacts from iCloud to iCal in snow leopard? Thanks for help !!!!
-
Hello, I have 30 fields on an IR and I want to show all of them but, I have to click on the Link Column that goes to the Single Row View. The Report View lists all of the fields but, I want to be able to scroll Horizontally with an IR and not have my