My logic board was replaced and now Logic is asking for my serial number again - I don't think I have my docs for Logic anymore, what can I do?
I've had my Logic Pro software for years now, and since I got my logic board replaced, Logic won't open without re-entering my serial number, which I don't think I have anymore! What do I do? Help is greatly appreciated!!
Please stop making multiple posts on the same subject.. This is the third thread you have created in a short space of time asking the same question.
Please read the answers given in this thread you posted...
https://discussions.apple.com/thread/5311324?tstart=0
Similar Messages
-
Also, I can't do that thing where you go on itunes and find out which device was last connected because I accidentallly connected a different ipod. soo yeah
Go to the iPods syncing computer. Open iTunes and open iTunes' Preferences. Go to the Devices tab and hoover the mouse pointer over the backup for that iPod. The SN whill come up.
Als see:
iPod: How to find the serial number -
I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!
If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD
-
I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this? I had started using it for a few hours and tried getting the update and now it won't let me activate the phone. I also can't call the helpline because it won't let me leave this screen on the phone that says "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes." What it says on iTunes after I fill out the activation info is "There was a problem activating your iPhone. Please contact Verizon Wireless at 1-800-922-0204 to have this iPhone added to your account. Click Continue to be able to explore its features and the App Store." Please help this is driving me nuts!
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
My MacBook Pro fell and now when I turn it on its stuck at the apple logo screen with a loading circle underneath it. What can I do to get passed this?
Sounds like something internal was damaged in the fall, probably the disk drive. Take to Apple and ask them to fix it.
Allan -
I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?
I fixed it!!
While not connected to any USB cable I put the iPad in recovery mode.
To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new. -
I have a new mac book air and somehow iPhoto was installed twice. Also, a second library was created and it became the default library. I attempted to switch to the original library but it won't open. what can I do to revert to the old library?
Both iPhotos open to a default library (#2) which has 300+ photos, I attempted to "switch to library" under the file tab in iPhoto and tried to choose "other library" which had most of my photos. When I attempt to open it, it doesn't do anything. I can see it and there are 2 libraries but it won't open.
Have you tried to open your old iPhoto library by double-clicking it directly, instead of using the File menu? That should work, if you are running iPhoto '11 and the library has been created by that version or an older version. DO you get an error message, if you select the library directly in the Finder?
I checked and it is the latest version of iPhoto.
Is it iPhoto '11, version 6.0.5? "Latest version" is ambiguous, because it will depend on your system version.
Where is your iPhoto Library stored? -
I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in
Please then use your web Browser address http://www.adobe.com/ and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in using the account that has the subscription the one you used above to Activate Photoshop. -
I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?
I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?
Setting up and activating iPhone
To set up and activate iPhone, turn on iPhone and follow the Setup Assistant. The Setup Assistant
steps you through the setup process, including connecting to a Wi-Fi network, signing in with or
creating a free Apple ID, setting up iCloud, turning on recommended features such as Location
Services and Find My iPhone, and activating iPhone with your carrier. You can also restore from
an iCloud or iTunes backup during setup.
Activation can be done over a Wi-Fi network or, with iPhone 4S or later, over your carrier’s cellular
network (not available in all areas). If neither option is available, you need to connect iPhone to
your computer running iTunes for activation. You might also read http://support.apple.com/kb/TS3424 -
I tried updating my ipod touch to iOS6 then an unknown error occured so i disconnected it an now it is stuck on the apple sign and has a loading sign and has been like this for 2 hours. what can i do?
My home button is also unresponsive and i have to press it really hard to make it work.Do you remember the the exact wording of the error message:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I just purchased LR5 online and installed it on my PC. I entered the serial number I was given and it said "this is an upgrade serial number. The serial number from your previous version of LR is also required." Since I just bought it I don't have a previous serial number. What do I enter?
You return the upgrade version since it was purchased in error
Return, cancel, or exchange an Adobe order
Purchase a full version. -
I NEVER entered a password for the backup but now I want to restore my iphone and itunes asks for one. What can I do?
@Razmee209 is right there is nothing you can do if it is an encrypted back up
iOS: Troubleshooting encrypted backups - Apple Support
BUT you could try to see if you have a back up that is not encrypted. If you go to iTunes Preferences (On a Windows go to Edit Menu under the Play Button - On a Mac click on iTunes at the top left) Click on Devices and if you see a back up that does not have a lock next to it you will be able to restore from that back up without using that password.
Encrypted passwords are set up at the time you create the back up. -
I entered in the product code and now it's asking for a redemption code, I can't seem to find it!?
I just bought Lightroom from BestBuy and I am trying to get my serial number from adobe. I entered the product code and now they're asking for a 24 character redemption code and I can't find it on any of the boxes that I got. Where is it?
Hi BritneyL,
Please refer : https://redeem.licenses.adobe.com/getserial/s/redeem
You enter your redemption code at http://www.adobe.com/go/getserial. You can find additional details at Serial number retrieval process FAQ | Point-of-sale activation products - http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html. -
I locked my MacBook from my iPhone with the "find my iPhone" app and now it's asking for a 6 digit passcode
Normally, you d want to connect to computer, iphone had been synced with previously. If computer does not exist you may have to enter phone in recovery mode, just search youtube for iphone recovery.
-
Harddrive was replaced and now my computer won't recognize the IPOD
I recently had the hardrive replaced and now I can't seem to get it to charge, my itunes to recognize the ipod. I have tried several times restore and update. All I get is error messages "install wizard could not be completed" and "error in update manager". One thing...I have the IPOD with the color display and when I got it back and plugged it in (it worked long enough to download my music, but the display was in black and white. When I do get something on the screen it is a file with an exclaimation point and the www.apple.com/support/ipod website. HELP!!!!!
Hi,
A colour iPod without a workable system files, will display in play and white. I suggest that you should do a format first, before the Restore.
Please read the following for some suggestions
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Maybe you are looking for
-
ISight not working on new MacBook
Got my MacBook yesterday, started up and the iSight camera has not worked at all. The green light is lit, but when I use Photo Booth (or any other app using the camera), there is no image, only a solid color. I'm new to Mac's, so any advice is welcom
-
Automatic transfer of Shared Library: does it "catch-up" when Mac back on?
I setup this feature and it works great, although it seems that both computers must be on and iTunes running for it to work. Now, if the Mac (or PC) that "subscribes" to the main Mac's library (where I purchase music) was turned off, does it "catch-u
-
Ping!: NEW Idea for a more social music experience
I suggest a way for people to look at your music collection on itunes in a way that allows friends to see a list of everything(or things permitted by the user) in the users library in the form of a playlist where friends can preview and discover simi
-
Hi, We have a customized program for a material report. This program is working fine for all other plants except one. The report is not wrapped properly for one plant. the last column is going to 2nd row for each line. Can anyone please help to fix t
-
Problem in create message from satelite system
Hello! I have SAp Solution Manager 4.0 stack 15 I have configurate trusted connections between my solman system and satekite system. I successfully generate iBase, create business partners. When I create message from my sap user , message created wit