My logic pro 9 doesnt work after i installed os x lion. What can I do ?

My logic pro 9 doesn't work after I upgraded to OS X lion. Is there anything I can do to fix this problem? If not how can I downgrade back to Snow Leopard?

Similar Messages

My macbook pro starts to pop after I upgraded to Mountain Lion, what can I do?

Hi guys,
As the title said, my MBP 13" late 2011 starts to have popping sound coming out from speaker a while ago.
It just pop every few minutes and I am very worried.
I did a few research and it seems like there's something to do with the hard disk.
note that this happened right after I upgraded to Mountain Lion.
comfort me!!!
Thanks for helping.

Hey Samuraijin
/Hug to start with
Well when you did the upgrade the OSX ML uses your drive alot. As you said the popping sound from your research its comming form the drive. if that is the case. Check your disk with disk utitlities just incase too see if the drive is still ok. If its all Green your good if its red it might need replacement.
Note that Popping sound is usually a hardware problem or optical audio problem when using external speakers. instead of internal ones so becareful. My advice would be too be let it slide still the next patch if disk utilities says your drive is fine (Usually after 2 weeks of main realese). After that if its still there you have to get the puppy in for a checkup.
Hope i was able to comfort you in some way

I had a code to get logics pro for free and after it installed its asking me for a serial number does anyone know what to do from here.

I had a code to get logics pro for free and after it installed its asking me for a serial number but it never gave me one to put in, it just started downloading and then asked me. Does anyone know what to do from here.

I really don't think that is anywhere near on track.
Most likely the trial version was installed earlier, is that correct?

Internet Don't work after the last IOS Upgrade. What can I do?

Internet Don't work after the last IOS Upgrade. What can I do?

Can you give us more details?
Is Wi-Fi working, i.e. not greyed out in Settings/Wi-Fi?
Can you go online by using the Mobile Network?
Any error messages given?
Problem with your router?
See these articles for help with Wi-Fi issues:
Issues with Wi-Fi networks and connection
Wi-Fi or Bluetooth settings grayed our or dim
If you see No Service in the status bar of your iPhone or iPad - Apple Support
iOS and OS X: Recommended settings for Wi-Fi routers and access points

My photoshop CS2 no longer works after I installed OS Yosimite. What do I need to download to get this to work?

Is there a download to help this?

Eileen - I also had issues with Photoshop and Dreamweaver after I installed Yosemite. I went to the link below and download a the new Java. It solved the problem for me. BUT, I have CS5........so I don't if it'll work for you.
http://support.apple.com/kb/DL1572

My mbp 2011 hangs every 2 sec after i installed os yosemite. What can i do to just be able to use my mbp somehow.. All i see is the spinning wheel?!

my macbook pro 2011 is just hanging and showing the spinning wheel every 2 seconds after i installed OS Yosemite 2 days back. there is still a lot of spce in my hard disk so thats not an issue! What can i do to fix my MBP- please help?!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Lenovo Yoga 2 Pro: WiFi doesnt work after driver upgrade

After experiencing Wireless issues I tried to upgrade my Lenovo Yoga 2 Pro 13" with Windows 8.1 64Bit to the latest drivers from the lenovo support site.
Ever since I cannot connect to the WLAN anymore. What puzzles me is that the driver status in the device manager shows a different driver version than what I have installed (uninstalling the driver and reinstalling it doesn't change anything here).
What puzzles me is the Lenovo Website shows driver version 16.6.0.8 (released 25.Jan.2014, see link below), whereas my system display version is 16.6.2.1 (dated 31.10.2013). Hence I thought I have another version from somewhere else on my and removed all driver versions I could find.
Checking driver details I get the follow file versions:
   C:\windows\system32\drivers\NETwbw02.sys    version 16.6.2.1 Intel, dated 2011
   C:\windows\system32\drivers\Netwfw02.dat       no version or publisher
   C:\windows\system32\drivers\vwifibus.sys          version 6.3.9600.16384 Microsoft
Still, whenever I deinstall the driver, install the files from lenovo and click "Detect new device" my system pulls the drivers as listed above and is incapable of connecting to any WiFi.
Windows 8.1. shows no connections available and doesn't connect anymore.
How can I get my WLAN back?
regards
   Florian
Lenovo Driver URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS039994
Solved!
Go to Solution.

hi Florian,
If Windows Update is configured to automatically fetch updates from Microsoft then the machine most likely have installed the Intel driver update for Intel(R) Wireless N-7260 as discussed in this article (which explains the different driver versions).
Things that you can try:
1. If the machine comes with the Intel(R) Wireless N-7260, navigate to:
- Device Manager
- Network Adapters
- Intel(R) Wireless N-7260 (right click > update driver software)
- Browse my computer for driver software
- Let me pick from a list of device drivers on my computer (you will then see a list of drivers, check if you have the version 16.6.0.8 from Lenovo and choose it and observe.
2. Restart the machine and boot into the BIOS (by pressing F2 on the Lenovo screen). Once you're in, navigate to the Configuration Tab and ensure Wireless is set to Enabled (if applicable).
- Link to picture
3. Perform a System Restore and choose a date before the issue began. (this will restore the unit to an earlier point in time where wireless connection is working fine)
4. Perform a Refresh / Reset or press the OneKey Recovery button (this will restore the unit to factory settings - ensure that you backup important files first).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My mac book pro (2.66Ghz Intel core i7 4Gb ram) crashes every time I open iPhoto, browse photos or videos from Finder and work with slides, this started after I upgraded to mountain lion, what can I do??

I updated my OS to mountain lion and since then my mac book pro is virtually useless, seeng pictures, videos, using graphics applications and Iphoto is impossible, the screen goes black, and the system restarts.
This even happens sometimes at login, the login screen appears then the computer crashes and restarts, sometimes more than once, yesterday it even happened 6 times in a row before I was actually able to enter the password and log in.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy (command-C) the selected text to the Clipboard. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copy-and-paste as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Adobe flash doesnt work after i installed .

so i cant play online games so i decided to get the adobe flash download, it installed and everything, but videos on sites and games still dont work, i uninstalled it and re installed it 5 times. and google chrome wont download either it doesnt show up in my downloads folder

To uninstall you need to use the specific software from Adobe here:
http://kb2.adobe.com/cps/141/tn_14157.html
Remove it, reboot the Mac then install a new copy from here:
http://get.adobe.com/flashplayer/otherversions/
Google Chrome: Go to this page
http://www.google.com/chrome?platform=mac
Then control-click on Download and select 'Save linked file to Downloads'
When complete open the Downloads folder, mount the disc image (dmg) and drag the application into your Applications folder

Hyperlinks from Office for Mac don't work after I installed OS Mountain Lion

I installed OS Mountain Lion a week ago. Since then hyperlinks have not functioned from e g Word, Excel or Outlook for Mac. I am running MS Office for Mac 2011.
I was earlier using Snow Leopard and did not have any problems with that at all!
Needless to say, this is quite urgent as many emails contain important links, which I am unable to use
Is this a known bug??

Office 2004 is a PowerPC-only suite and will not run under Mountain Lion. You'll need to upgrade to Office 2008 or Office 2011, or get one of the various programs/suites that can open and save in Office format (Apple's iWork apps, LibreOffice, OpenOffice.org, etc.)
Or you'll have to downgrade back to Mac OS X 10.6.
Regards.

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

Does Logic Pro 9.0 work with Mac OS X Lion?

I don't want to update to Mac OS X Lion from Snow Leopard until I know 100% that Logic Pro 9.0.0 is compatible with it.
On a side note, would Final Cut Pro 7.0 work with Lion as well (I will not be upgrading to Final Cut Pro X)?
Thank you!

Okay peoples, I have great news!
I was told that maybe the update for Logic Pro 9.0.0 to 9.1.4 wasn't working for me because I must have renamed my software folder... and I remembered doing so back in 2010.
You see, my issue was:
I bought Logic Studio 8 (The big box with piano keys on the side) and then as soon as I did, Logic Pro 9 (the update version) came out. I was inclined to get the latest software, so I upgraded immediately. I remember wondering why my logic pro 8 stayed behind after the update so I foolishly renamed the folders "Logic Pro 8" and "Logic Pro 9" haha. Not knowing this would cause me grief later when I tried to update.
So, my Logic Pro 9 is working again fine. My only concern now is for the hardware (the Apogee Duet) I am using, as I have to wait for a Lion update in August, thankfully it is only a month away as apposed to 6
Cheers,
and I hope this helps.
Tuck

Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07

korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I downloaded, ran and restarted, tried to install Pro got same error
Thank You!
Robert W. O'Rourke
Tesla Systems, Inc.
<phone # removed - kglad>

Adressbook doesnt work after update to 10.7.3 PB says your adressbook is 5.0.3. Can anyone please help?

Adressbook doesnt work after update from Snow Lepard to Lion 10.7.3 PB says your adressbook is 5.0.3.
PB says You have adressbook 10.5.3, yes, but now?
Can anyone please help?

Use the copy of AddressBook that is in your Applications folder, not the one on your Dock that's linked to a transplanted copy of the prevoius AddressBook App.

My logic pro 9 doesnt work after i installed os x lion. What can I do ?

Similar Messages

Maybe you are looking for