My Logitech Pure-Fi anywhere 2 is not working with my iPhone 4

I got my Logitech Pure-Fi anywhere 2 just under a year ago and now when I plug my iPhone 4 into it the sound only comes out of the iPhone speaker, It will charge but the sound doesn't work with it.

I don't think this is a malfunction. Since the iPhone emits radio signals it can distort the audio signal to the speakers and cause a buzz sound. By putting the iPhone into Airplane Mode it stops transmitting and you will hear a cleaner audio signal through the speakers.
The message you are getting is most likely a feature to improve sound.

Similar Messages

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

  • Downloaded yosemite continuity is not working with my iPhone 6.  Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated

    downloaded yosemite continuity is not working with my iPhone 6.  Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated

    Connect your iPhone, iPad, iPod touch, and Mac using Continuity

  • HT1665 Logitech rechargeable speaker S315i no longer works with my iphone 5.  It won't charge or play music.  Is it to do with the speakers or iPhone?

    Hi, my My Logitech rechargeable speaker S315i no longer works with my iphone 5.  It won't charge or play music. When I switched to iPhone 5 I had to buy an adapter - but it still worked perfectly...now it just stopped working???  It still works with my original iPhone (first model!!)
    This must have to do with the iPhone upgrade....has anyone had this problem?
    Landy

    Try this procedure; it has worked for many people.
    Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

  • Genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge

    genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!

    Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
    Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me...

  • Digital AV adapter not working with my iphone 4 having IOS 5.0.1

    I recently purchased a digital AV adaptor and tried to connect it with my HDMI TV. But it says that this accessory is not compatible with iphone. If its not gonna work why are they selling this adaptor?
    I tried using another hdmi cable but it didnt work also. I went back to the store and there the guy connect the adaptor with his iphone and it worked. He was using IOS 4.3. Does it has to do with the IOS 5?
    Advice please. What shall I do to make it work with my iphone?

    Contact AT&T and ask about the process and if your phone is eligible
    http://howto.cnet.com/8301-11310_39-57411361-285/how-to-unlock-an-at-t-iphone/

  • Why is my iMessage not working with all iphones ?

    Hi can anyone tell me why my iMessage isn't working with all iPhones? When it dose it sometimes sends message as a text

    Hey Mgpr,
    There's an article that helps with troubleshooting steps for issues activating iMessage that I think is worth a look. See if any of the suggested steps work for you:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Sincerely,
    Delgadoh

  • Itunes 64 bit not working with my iphone 3

    First of all my itunes decided to stop working stating that itunes helper not available and to re-install. Which i did. For the latest version.
    Now my iphone 3 cannot work  with itunes. It says that i need to download 64bit version for windows 7 64bit. ---- I have downloaded the 64 bit version and installed it twice now. still not working.
    I then tried to go back to an older version but i get another error saying that ituneslibrary.itl cannot be read as was created with newer version of itunes.
    I'm not too bad with computers but this is my first iphone so any help would be greatly appreciated.
    Thanks.
    Lee

    Now my iphone 3 cannot work  with itunes. It says that i need to download 64bit version for windows 7 64bit.
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • IMessage not working with another iPhone

    Here's the scoop; I have an iPhone.
    My boyfriend used to have an iPhone. iMessage wasn't a problem at all.
    A few months ago, my boyfriend switched to android and obviously iMessage was no longer compatible. I had the same issue that everyone gets when their friend or even themselves switch over to an android from iPhone when it comes to iMessaging.. sometimes the messages won't send. I had that issue for a while until I finally figured it out. I messed around with my phone a little bit, I turned off iMessage, I changed in his contact the "iphone" setting to "mobile" for his phone number. I turned off my phone and turned it back on. I did it all. That problem was resolved, after my iPhone was constantly sending his android iMessages. Solved, done, cool- I was content.
    But now, my boyfriend switched back to his iPhone from an android. I figured our iMessaging would be no problem now, because lets be honest, us iPhone users all hate those green text bubbles. But everytime I text him now, I GET THE GREEN TEXT BUBBLES. Our iMessage isn't working. I looked up this question in multitude of ways: wording it differently, looking up different things, trying out some solutions people have come up with.
    I don't want to hear these answers, because I've tried them all. More than once.
    1. Resetting my Network Settings.
    2. Making sure my Apple I.D is checked on the Send & Recieve screen.
    3. In contacts, switching the "moble" to "iPhone" back on his contact.
    4. Restarting my phone.
    5. Turning on and off my iMessage.
    6. Even turning on and off my SMS, just to see if it would work.
    Nothing. All of it, nothing. I'm stumped. We haven't tried from his end to do more things like I did, yet. But he has done the following: #4 and #5.
    Help and an answer would be nice.
    Thanks!

    I'd like to add that my iMessaging is only not working for him. I can send iMessages to everyone else, except him.

  • Why tata docomo cdma (india) sim is not working with my iPhone 5 A1429 Hong-Kong model?

    I have bought second hand iPhone 5 Hong kong model A1429 and it works with all gsm carriers can i use cdma sim in it?
    i have iOS 8.1 and i searched through internet and i found that A1429 model supports worldwide GSM and CDMA networks but actually it can not.

    That model iPhone should support LTE on Deutsche Telekom. What carrier are you trying to use it with?

  • Why are the Radio Adapters that work on my iPod not working with my iPhone?

    I had purchased an adaptor to plug into the bottom of my iphone to play the music from my iphone of my radio. I purchased one of the adapters and it worked for a month then it stopped working and the iphone quit playing the music over the radio... However it showed that it knew a device was plugged in. I have tried 2 more models and have had the same problems. Is it the iPhone?? I am confused as to why it is not working... Below is one of the three products I tried
    http://www.radioshack.com/product/index.jsp?productId=2974855&cp=&sr=1&kw=fmtransmitter&origkw=fmtransmitter&parentPage=search

    i dont use those, so im going to guess that its because it needs to be labeled "iPhone compatible"...since its different than a regular iPod

  • WAP4410N not working with Macbook & Iphone

    I recently purchased the WAP4410N to be an accesspoint for guests in our building. We configured it with WPA2 personal secuirty and B,G,N Mix. It seems to be working for all of our clients with PC's, however we have had conncection issues with connecting the Macbook Pro and Iphones to this point. Today I even updated the firmware to 2.0.0.12 with no change. There has to be something in the setup that I did wrong, any help would be greatly appreciated.

    Hello Sir,
    Are you using your WAP4410n as a simple Wireless connection ( phyical connection to your router, switch, etc., etc.) and just provisioning the Wireless tab for wireless connection?
    Or you have the WAP4410n with a AP Mode Tab (Access Point, Wireless Repeater, or a Wireless Bridge)
    What would do if you are just using the WAP4410n as a Wireless connection. I would set it up with WPA-Personal Security with TKIP and a password for starters. Now all PC will see the change and will request the password for the WPA-Personal connection. Now check to see if the Macbook and the iPhone connects with WPA-Personal.
    I did a test with my iPhone and works fine with WPA-Personal and WPA2. but this is just as a simple Wireless Connection not using AP Mode Tab.

  • Why does the logitech s715i not work with my iphone 4 anymore?

    Anyone have any ideas?  I can find a few posts around the internet but not been able to find a solution yet.  Is this something the next iOS release will fix?  I know audio is making it through to the speakers but it's very, very faint (depsite vol turned to the max).  My old iPod nano works fine but i hardly use it...

    I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142).
    I too have contacted Logitech for support and am awaiting a reply.
    Can we get some help over here?

  • My sim card will not work with my Iphone but will for other Iphone's, My sim card will not work with my Iphone but will for other Iphone's

    When I put my sim card in it comes up with no service. But I put it into a friends one and it started to work and recieve text. I'm not sure why it's doing this and what to do to solve it. Does anyone know?

    Most likely you phone is locked to another carrier. Also, see this:
    iPhone: Troubleshooting No Service

Maybe you are looking for

  • Problem in loading AdobeSpellingConfig.xml.

    I am using Squiggly for my spellcheck requirement in flex. I confired it as describe in douments and its works great in local machine. I am using SpellUI class to get spell check done. Now, My problem start when i upload it to the server. I am using

  • Regarding: calling a rfc function module for web dynpro for JAVA

    Hello all, I want to call an rfc enabled function module from webdynrpo application. *and there is one condition that function module should be called not threw bapi.* Thanks Edited by: Punit Pawar on Jul 21, 2008 10:38 AM

  • How can I set my Database in mode ARCHIVELOG?

    Hello, I was reading that I need to set my Database on mode ARCHIVELOG to make backups. How can I do it?

  • Load balancing is not working correctly during server fail-over

    Hi,           We have 4 weblogic instances in a cluster with proxy-plugin load balancing the requests. When instance 1 is shutdown, all the subsequent requests from users whose sessions were at instance1 are sent over to instance2 only. They are not

  • SD and accounting issue

    Hi All I am facing a problem I can easily create a sales order and deliver it. but after the delivery the accounting documents shows 0 cost.earlier it was showing the exact value. also the decrease stock is not shown. can anybody help me wat can be w