My loop browser is playing loops that arent on the Hard drive!??!???!

I have 60's shuffle drummer 01 02 03 etc that i threw out a long time ago. I just repaired perms, repaired disk. Now
i have these loops in the browser and they play
but i do not ( ive looked everywhere ) have them on my computer's HD. Isnt it absolute that what is played in the browser must be on the HD somewhere?
This is the strangest thing that has happened?
any clues?
any???

thanks so much... for your time and expertise.
1-I want to organize the loop browser so that if i want lets say only electric guitar solo loops or just drum fill loops I could bring all those up in the browser where it says show all ( in the very left column) and they would appear in the same amount ( minus those in 3/4 or 6/8) as they are in the subfolder in the Apple loops HD folder. Thats the first concern i have.
2-i am not really really sure that every loop i have in my HD (lib>audio>apple loops folder is actually listed in the loop browser. I bought several different third party loops and some have odd names and so forth all in all i must have 6 thousand loops or more...Id like to make sure that they are all indexed properly. Id like to start from scratch. So as not to get duplicate problems etc etc. I would feed the route Hard drive initially free of any loops from an external HD with the loops and re drag the loops in their respective folders onto the HD and then the browser and reindex them so that im sure im doing it right.
thats the goal. I would ofcourse trash the index document before i do this.
I understand with prefs unchecked (no filter) the only loops that wont be showing will be those with different time signatures.
Now, in my newly made HD loop folder ill have subfolders with loops for electric guitars, acoustic guitars, drum kits, drum fills, etc. etc
What im asking therefore is if i have subfolders with more specific loops in them is it just a matter of dragging each sub folder over the browser and when i go to the browser to search them, I would simply have to click on the very left column where it gives you the options show all etc..
and i should see the loops in each of these subfolders (minus the different time signature loops) as they are on the Hard Drive?
i found that Jam Pack 4 orchestral is only loadable if you do it in small amounts. It will not take the whole folder and index. ( thats my experience ).
So are these feats possible and can i do them the way ive stated it so far?
now the catch and the problem im having here is that the loops have been assigned different instruments genres that conflict with what i would like. I am not going to go in and change all of them to suit me in APPLE SOUND UTILITY.
i just want to know they are all indexed and that i can grab them with the above method. do let me know
i thank you so much.
gl

Similar Messages

  • HT1420 how do i Deauthorize a computer that has had the hard drive lock up and can not get it working

    how do  i deauthorize a computer that has had the hard drive lock up and can not get it working

    You can only deauthorise individual computers directly on them. Otherwise if you've reached the 5 computer limit, then you should be able to log into your iTunes account and 'deauthorise all' (which you can only do once every 12 months) and you can then (re-)authorise up to 5 computers : authorising and deauthorising.

  • Trying to install snow leopard on my Macbook Pro.  After already having problems with Grey screen, blinking file with a question mark, etc.  Computer now says that one of the hard drives is failing.The "hitachi" drive says it's failing in disc utility.

    o.k.  So, I've been tinkering with several "self help" fixes for several days now with no positive results.  I'll explain my initial problems and then end with my most current situation.  In hopes that someone out there will have a good suggestion or possibly remedy for the issues i'm facing
    First, my problem started after my wife played a game on my macbook pro and the computer froze.  She went into a panic and decided to shut down via power button.  When computer restarted she got the blinking file/grey screen and that problem continued for a couple of days before I began using steps from various support topics from apple concerning the grey screen/blinking file folder.
    Ultimately, yesterday I decided to erase my Macintosh HD file as one tip suggested.  Following the brief online and on screen (via the process) tips that were there.  Once that was completed I attempted to reinstall snow leopard (my most current version on hand) into the pc. 
    At first, I thought this would work.  It looked promising.  But, after several hours the installation screen returned with failure.  I attempted to repeat.  And, even repair drives during this try and re-try process.
    Now, today, one of the drives..  "hitachi..." states that it's failing and is in red letters with no ability to repair via the disc utility screen.  The Macintosh HD drive shows that it's o.k. But, this drive is listed under the HItachi drive so I think that's where a problem might lay.
    So, I guess my question really revolves around.. What if anything can I do to get the hitachi drive back up?  (short of taking it to a repair facility and replacing.) 
    And, how on earth can i get my OSX back up to I have a laptop again. 
    Operating on a macbook pro here.  It's my lifeline.  Otherwise, I am using a Windows desktop that i'm not that fond of.  lol
    I'm trying to bring this 2006 laptop back to life.  Trying to avoid a rather expensive repair or the purchase of a new laptop.  Also expensive...
    Any help would be appreciated.

    Well, running on a 2006 model.  I did not have a startup disc.  Initially, it booted up on original software in 2006.  Since then, I've upgraded to 10.6 via a box set.  And, since then I think I popped it up to lion. 
    All I have on a disc is snow leopard.  And, I can't get farther than the setup screen due to hard drive.  I'm taking to a apple authorized repair store right now.  We'll see what they tell me .  I'm just going to weigh the cost of repair vs. buying new.
    Another bad, stupid thing is I had no means of backing up my stuff.  So, I might have lost things like music, vids, etc.  we'll see if they can recover.  If the cost is too much for repair I might just forget it and start over with a new system.  Just not sure at this point.

  • I clicked "locate" when prompted, now the track won't play at all even from the hard drive though it's listed in iTunes. Can anyone help?

    I was prompted to "locate" a track, clicked yes, and now the track won't play no matter where I play it from. I've put it on the desktop, added it to library, tried everything - is there an equivalent "reconnect media" function like in Final Cut Pro? I'd be grateful for any help thanks

    Will it play in Quicktime player?  If not it may be corrupt and will have to be reloaded from the original source.

  • I purchased CS4 Design Premium in May 2012. I recently had problems with my MacBook Pro that required erasing the hard drive and restoring from my Time Capsule back-up. Since thenI can't open any of the components (message: "Suite Product Activation Neede

    Nevermind! Found the "preference" to allow one-time exception.

    don't restore, properly install.
    at this point, uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT4906 i had iPhoto and now that i erased the hard drive i phot is gone

    my computer came with iphoto i recently resored the computer to its original purchase state and now the iphoto is missing.  any idea why?

    Reinstall it.
    If iPhoto was installed on your Mac when you got it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Since yesterday, when I push the play button, that automatically  activates the pause putton. Result : I cannot watch nor listen anithing. Please help me ¡

    since yesterday, whwn I push the play button, that automatically activates the pause button. Please  help me¡

    The play button in which App?
    Have you tried restarting or resetting your iPad?
    Restart iPad: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPad: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Ignore the "Slide to power off".

  • I just changed the hard drive on my computer and my music and videos that I got from my friend will not play because I don't remember his password.  Any solutions????

    I just changed the hard drive on my computer and my music and videos that I got from my friend will not play because I don't remember his password.  Any solutions????

    If you are talking about your friend's iTunes password, you are not supposed to use or have his password or even his music,etc. in your computer...

  • Playing media files from Time Capsule hard drive

    Hello folks,
    I am using my 3TB Time Capsule to host all of my video files, most of which are MKV files. I also have an external hard drive connected to the USB port on Time Capsule and there are few video files on it as well.
    I am using Time Capsule as a router sitting between the cable modem (WAN) and my locan network (LAN). I have an Argosy HV355T digital media player hooked up to my home theater and TV via HDMI. It is connected to Time Capsule via Ethernet.
    On Argosy media player, I am able to connect to Time Capsule (login is successful) but I can neither see the hard drives nor their contents.
    When I connect the external hard drive to the USB port on Argosy, the hard drive is recognized and files from it can be read and played. Thus I have ruled out the possibility of Argosy being unable to read Mac formats.
    I try to use uPnP on Argosy to connect as uPnP client to Time Capsule, but nothing happens. I thought uPnP is turned ON by default on Time Capsule.
    Why am I not able to see the Time Capsule hard drive from my media player?
    What am I missing in my setup?
    Do I need to install a media server device to read files from hard drives and storage, and stream to media player (Argosy)?
    How are you folks using Time Capsule to play video from its hard drive on to TV?
    Thanks.

    I try to use uPnP on Argosy to connect as uPnP client to Time Capsule, but nothing happens. I thought uPnP is turned ON by default on Time Capsule.
    Why am I not able to see the Time Capsule hard drive from my media player?
    What am I missing in my setup?
    Do I need to install a media server device to read files from hard drives and storage, and stream to media player (Argosy)?
    How are you folks using Time Capsule to play video from its hard drive on to TV?
    The TC has no upnp.. no Apple device does.. Apple refused to join and went off in a huff, sat in the corner and created their own.. NAT-PMP.. which as you can imagine.. doesn't work with anything else but Apple stuff.
    So first issue.. no upnp but that isn't a biggie.
    SMB file protocol which the rest of the world uses.. has rules which Apple also breaks.
    Make sure your TC is setup with all short names. no spaces and pure alphanumeric.
    On the file sharing page of the airport utility.. (you may need to use 5.6 from Mac or Windows), ensure that you set a workgroup.. generally now WORKGROUP. And make sure you turn on the guest account to full read and write permissions.
    It would be good to ensure a normal windows computer can access the TC..
    In windows explorer type in the address bar
    \\TCname or \\TCIPaddress (where you replace with actual name or IP).
    I do not know the Argosy player but I will look it up.
    My hacked ATV1 can see and play files from the TC. That is running XMBC of course.

  • I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
    He has made a comprehensive list, browse through them and decide which  suits your requirements.
    Have a nice day!

  • Get info saying only 108 gb used up on the hard drive, but it's at least 3 times that

    Just wondering what the explanation for this could be. When I select the HD icon and choose "get info" in the file menu, it says that the HD file size is 108 gb, with 642 gb available. There is at least (on a rough count) 300 gb used up on the hard drive, with music, photos, movies, documents etc. They haven't been catastrophically erased or anything like that, they're all still there. So why is my hard drive saying only 108 gb used?
    Tom

    Have you compared this with what System Information>Hardware>Serial-ATA and what Disk Utility shows?
    You might download OmniDiskSweeper from the Internet (free) and open it.  This will show all of your files and the respective sizes.
    Is your drive partitioned?
    I assume you are referencing this dis[play:
    Ciao.

  • I have recently bought a Seagate Goflex satellite mobile wireless hard drive. I have converted some of my AVI movies to mp4 and transferred them to the hard drive, but when I play them through my iPad 2 I can hear the sound but not see the movie. Help???

    I have recently bought a Seagate Goflex satellite mobile wireless hardrive , i have converted some of my AVI movies to MP4 and loaded them onto the hard drive, when I try and play them through my I pad2 I can hear the sound of the movie but not see the film, somebody please help, what am I doing wrong as I have spent a lot of time converting these movies to be able to travel with my iPad and watch them. Thank you

    Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
    While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
    It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

  • I have a sony HDR-SR5 camcorder and need to empty the iternal hard-drive. I have downloaded onto Picture Motion Browser and woud like to know if this will have stored all of the data on the hard-drive so can go back and edit later.

    I have a Sony HDR-SR5 camcorder with a 40GB internal hard-drive. I need to clear the hard-drive as it's almost full. I have managed to download the footage onto Picture Motion Browser, but am wondering whether PMB will have stored all the info from the camcorder hard-drive so that I can edit later.
    Also, I would like to back-up on another hard-drive, but when I have tried this I can't view the footage stored on the hard-drive so am not sure whether I have backed up sufficiently and in what format? If anyone can point me in the right direction, I'd be very grateful...

    >I have managed to download the footage onto Picture Motion Browser
    Isn't Picture Motion Browser available for Windows only?  If so, why are you posting in an Final Cut Express forum?  My apologies if I'm incorrect.
    -DH

  • How to play iTunes and music from external hard drive?

    I recently back up all my music from my old computer on to an external hard drive. I have a new computer but don't want to store all the music on the computer's hard drive. I would rather play iTunes and all the music straight off of the hard drive. How do I do this?
    I already downloaded and installed iTunes on my external hard drive and my music is on a separate folder. When I open iTunes it says that I have no music in the library. How do I tell iTunes to use all the music from the external hard drive? I do not want to save anything on my computer's internal hard drive if possible because I do not have enough space.
    Thanks for the help. Also, if I should clarify anything else then please just let me know!

    did you ever find the answer to this question? I have the same problem

  • Playing a library from an external hard drive

    I recently got a new lap top. I have backed up my Itunes library from my desk top to my external hard drive. Is it possible to play my library from my external hard drive on my laptop without downloading all the songs directly on m laptop and taking up all of my free memory?

    Yes it is possible. To prevent having iTunes make duplicate copies, go to Edit > Preferences > Advanced > General and make sure that "Keep..." and "Copy..." are *both not checked.*
    Then, make sure the external is connected, and add the songs to the iTunes library. To start, add one or two to the library, and play them, and see for yourself that the files are not on the main hard drive. When you are comfortable, you can add the remaining 5000 (or whatever!) songs.

Maybe you are looking for