My loop statement in smartforms seems not to be working...

Hello Experts,
I am currently practicing smartforms and I am trying to display the records of my internal table.
What I did was in my table under MAIN window I have put the statement:
it_spfli into wa_spfli and also in my main area of my table I have a loop statement. Now, in one of my text
i put wa_spfli-carrid, wa_spfli-countryfr, etc. But it still does not show any data.Help would be greatly appreciated.

u will be getting a function module name for the smartform then
goto se37-->enter the FM name -->search for the ITAB you r using then put a break point.
come back to u r program the run.. controle will stops over there then check whether the data is populating or not.
INPUT and OUTPUT patameters are for program line and INITIALIZATION tabs.. when you want to modify some data in these you need to give the veriable or ITABs u r using inside. so that system will determine the global declarations(veriable or ITAbs).
for more info refer these links
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm

Similar Messages

Having upgraded all my devices to IOS 6, including iPad And upgraded no montan limón no my macbookpro, iCloud seems not to be working as smoothly anymore And some impagos docs have not transferred. Help

Having upgraded all my devices to IOS 6, including iPad And upgraded no montan limón no my macbookpro, iCloud seems not to be working as smoothly anymore And some impagos docs have not transferred. Help

Having upgraded all my devices to IOS 6, including iPad And upgraded no montan limón no my macbookpro, iCloud seems not to be working as smoothly anymore And some impagos docs have not transferred. Help

HT4628 My airport seems not to be working anymore. I have internet but now I can't play music through Itunes remotely. Airport kept flashing amber. Now I have tried to reset it it only flashes briefly amber and then no more light and it seems disconnected

My airport seems not to be working anymore. I have internet but now I can't play music through Itunes remotely. Airport kept flashing amber. Now I have tried to reset it it only flashes briefly amber and then no more light and it seems disconnected?? Any help out there?

Unfortunately the Netgear DG834N router is rubbish with Macbook Pro's. I've had a few netgear routers, which were all good with my mac, which is why I bought the 'N' series one as an upgrade to the 'G' version, but basically it crashes my Mac constantly. I get the fade up grey screen forcing my to hard power off my book. everything freezes. It plain just doesn't work. wireless 'N' is still just in draft form and the difference between the Netgear and Mac version on the macbook pro just clash. Netgear haven't updated the firmware on the router since last year, so hopefully the will soon, but I've just gone back to my old 'G' version, and stuck the DG834N on ebay. I tried all the configs, with and with out security and no luck, it always disconnected, froze and crashed.

A Cooling Fan seems not to be working

A message from HP: A cooling Fan seems non to be working, the system will shut dowin in 15 seconds

Hi ErmannoFelici,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and getting a cooling fan error. Here is a link to troubleshoot overheating.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Items BulkAction - "Copy" seems NOT to be working?

I AM TRYING TO COPY MANY ITEMS USING THE "BULK ACTION" FROM ONE FOLDER TO ANOTHER IN THE SAME CONTENT AREA.
I FOLLOWED THE CORRECT STEPS BUT NO ITEM IS COPIED.
THE BULK ACTION "DELETE" SEEMS TO BE WORKING OK.
DID ANYBODY EXPERIENCE THE SAME PROBLEM?
I AM USING PORTAL 3.0.9 / W2000
I WORK IN SPANISH LANGUAGE.
ANOTHER THING, COPYING ONE ITEM AT A TIME (USING THE NORMAL "COPY ITEM" FUNCTION WORKS FINE).
TKS!

Maria,
It works fine for me. Have you applied all the relevant 3.0.9 patches? Please check Metalink. Note that some of the patches include other patches, so read the patch release notes carefully.
Regards,
Jerry

My apple ID's seem not to be working

Hi for some reason l am having heaps of trouble with my IDs for apple TV.
It has been working fine untill yesterday now its all gone to *#&#* and l cant even get apple to send me an email to change my passwords, which l should not have to do.
It all started when l downloaded a purchased movie on my Ipad as l was watch something else on the TV, then when l tried to access this from my Apple TV nope cant see this purchase, however when l do to re purchase the rented movie its states do you want to purchase this again?? what the!! so the apple TV knows lve done this purchase but the system cannot find the purchase!!
HELP
l have tried logging in and reset passwords but to no avail, tried looking for the on my Imac, can see this but does not play on imac ... so l am at a bit of a loss at the moment.
Apple please dont let this Apple TV be a lemon!

Same here. It worked fine this week, and now it is kicking me out.

Changing a mapplet select seems not to be working

I am trying to change the mapplet select for the BOM Header extraction task. I've copied the mapping from the ORA R12 Adaptor to my custom folder and I've altered the mapplet in my custom folder. I've also copied the informtica task and workflow.
In DAC I've pointed the task BOM Header to pick the task from my custom folder.
Session Log says custom folder... but it seems that the mapplet is still running the original select. (I've changed the mapplet to limit the number of rows ROWNUM < 10 but I can see in DS table more than 400K records...
Anything I am forgotting ?
Txs. a lot.
Antonio

Sometimes the SQL in a mapping is ignored because there is a session SQL override in the workflow? In workflow manager, select workflow, select task, select tab mapping, select source qualifier, look at property "SQL Query".

Subwoofer seems not to be working?

Last week, I purchased Best Buy's daily deal, the Insignia rocketboost wireless subwoofer. With it I purchased the Rocketfish-rocketboost wireless receiver/transmitter. I hooked up the transmitter to the back audio out of my Sony Bravia tv. I plugged in the subwoofer across the room. I was able to easily connect them. Both blue lights are on the back of the subwoofer, and all lights are steady on the transmitter. But I hear nothing coming from the subwoofer? I tried changing the input on my tv, but none other worked than the HMD1. I then plugged in the transmitter to the audio out of my dvd player and plugged that back into my tv where it was, but still nothing. Not sure what is wrong? Can anyone help?
Thanks!
Olivia

You might have to post some pictures of your set up, that might make this easier. Or atleast post some model numbers as products are different even within manufactures product lines.
But, I still believe on Sony tv's you have to tell them you are using some time of audio out.
I dont' know why you're using ANY type of external sound without a A/V reciever anyways. Unless it's a soundbar.
Former BBY Home Theater Associate 2010 - 2012. Now I work as a graphic designer in the print and prepress industry.

Real Player seems not to be working properly.It downloads the video but I click "play", nothing appears on the screen.It worked ok till some days ago.I've tried resetting real player but nothing happens.How can I solve this?

Real Player is not working properly.It downloads videos but when I click "play" ,it doesn't reproduce the video. I tried resetting Real Player but nothing happens.
It worked fine up until a couple of dyas ago.
What can I do?

compuma wrote:
What can I do?
Ditch RealPlayer and use a real audio app.

Oracle Text Context index keeps growing. Optimize seems not to be working

Hi,
In my application I needed to search through many varchar columns from differents tables.
So I created a materialized view in which I concatenate those columns, since they exceed the 4000 characters I merged them concatenating the columns with the TO_CLOBS(column1) || TO_CLOB(column)... || TO_CLOB(columnN).
The query is complex, so the refresh is complete on demand for the view. We refresh it every 2 minutes.
The CONTEXT index is created with the sync on commit parameter.
The index then is synchronized every two minutes.
But when we run the optimize index it does not defrag the index. So it keeps growing.
Any idea ?
Thanks, and sorry for my poor english.
Edited by: detryo on 14-mar-2011 11:06

What are you using to determine that the index is fragmented? Can you post a reproducible test case? Please see my test of what you described below, showing that the optimization does defragment the index.
SCOTT@orcl_11gR2> -- table:
SCOTT@orcl_11gR2> create table test_tab
2    (col1 varchar2 (10),
3      col2 varchar2 (10))
4 /
Table created.
SCOTT@orcl_11gR2> -- materialized view:
SCOTT@orcl_11gR2> create materialized view test_mv3
2 as
3 select to_clob (col1) || to_clob (col2) clob_col
4 from   test_tab
5 /
Materialized view created.
SCOTT@orcl_11gR2> -- index with sync(on commit):
SCOTT@orcl_11gR2> create index test_idx
2 on test_mv3 (clob_col)
3 indextype is ctxsys.context
4 parameters ('sync (on commit)')
5 /
Index created.
SCOTT@orcl_11gR2> -- inserts, commits, refreshes:
SCOTT@orcl_11gR2> insert into test_tab values ('a', 'b')
2 /
1 row created.
SCOTT@orcl_11gR2> commit
2 /
Commit complete.
SCOTT@orcl_11gR2> exec dbms_mview.refresh ('TEST_MV3')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> insert into test_tab values ('c a', 'b d')
2 /
1 row created.
SCOTT@orcl_11gR2> commit
2 /
Commit complete.
SCOTT@orcl_11gR2> exec dbms_mview.refresh ('TEST_MV3')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> -- query works:
SCOTT@orcl_11gR2> select * from test_mv3
2 where contains (clob_col, 'ab') > 0
3 /
CLOB_COL
ab
c ab d
2 rows selected.
SCOTT@orcl_11gR2> -- fragmented index:
SCOTT@orcl_11gR2> column token_text format a15
SCOTT@orcl_11gR2> select token_text, token_first, token_last, token_count
2 from   dr$test_idx$i
3 /
TOKEN_TEXT      TOKEN_FIRST TOKEN_LAST TOKEN_COUNT
AB                        1          1           1
AB                        2          3           2
C                         3          3           1
3 rows selected.
SCOTT@orcl_11gR2> -- optimizatino:
SCOTT@orcl_11gR2> exec ctx_ddl.optimize_index ('TEST_IDX', 'REBUILD')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> -- defragmented index after optimization:
SCOTT@orcl_11gR2> select token_text, token_first, token_last, token_count
2 from   dr$test_idx$i
3 /
TOKEN_TEXT      TOKEN_FIRST TOKEN_LAST TOKEN_COUNT
AB                        2          3           2
C                         3          3           1
2 rows selected.
SCOTT@orcl_11gR2>

After upgrade to MLion most of my main accoungs seem not to be working. How do I fix?

I upgraded, and mosty of my mail accounts now don't let me send mail, although I can get it. Any fix for this?

Ditto; After upgrading to Mtn Lion and using Mac Mail and POP accounts, I am able to send email but not able to receive email. In the Advanced window of Preferences/Accounts, if I choose the Authentication method "Password", there is no place to confirm my User Name and Password for my outgoing SMTP server. Any help ideas? Thx

My select select statement seems not to work...

Hello experts,
I am having trouble with my select statement below. Here is what I need to do:
1. loop at itab it_equz.
2. get single asset number(ANLNR) and description(SHTXT) from table ITOB where EQUNR =_equz-equnr.
3. get single asset number(ANLN1), asset subclass(ANLN2 and subnumber(ORD42 from table ANLA where its asset(anln1) equals to the asset fetched by ITOB. (no. 2 step) and DEAKT eq '00000000'
4. Now, I would get all fields(select single) in table ANLC where ANLN1 equals to asset fetched by ANLA and ANLN2 equals to ANLN2 fetched by ANLA and AFABE eq '01'.
5.endloop.
Now, the problem is that I can't seem to get the right values in table ANLC. Now, my boss said that the values that I must get in ANLC must not be deactivated. So I did that by getting the required fields(no 3 step) in table ANLA where its DEAKT is equal to '00000000'.
Now, my select statement for ANLC seems not to work properly since I have the proper where conditions. Anyway, below is my select statement that I did:
LOOP AT it_equz. "no 1 step
SELECT SINGLE anlnr shtxt FROM itob   "no 2 step
          INTO (it_itob-anlnr, it_itob-shtxt)
          WHERE equnr = it_equz_dum1-hequi.
MOVE it_itob-anlnr TO it_finaltab-asset_dum.
            MOVE it_itob-anlnr TO it_finaltab-asset.
            MOVE it_itob-shtxt TO it_finaltab-description.
SELECT SINGLE bukrs anln1 anln2 ord42   "no 3 step
            FROM anla
            INTO (it_anla-bukrs, it_anla-anln1, it_anla-anln2,
                  it_anla-ord42)
            WHERE anln1 = it_finaltab-asset
              AND bukrs IN r_iwerk
              AND deakt = '00000000'.
MOVE it_anla-ord42 TO it_finaltab-asset_sub.
              WRITE it_finaltab-asset TO v_asset.
              CONCATENATE v_asset '-' it_anla-anln2
              INTO it_finaltab-asset_subnum.
SELECT SINGLE bukrs anln1 gjahr afabe knafa kansw "no 4 step
                          answl kaafa nafal aafav aafag
                          nafap aafap nafav nafag FROM anlc
                      INTO (it_anlc-bukrs, it_anlc-anln1, it_anlc-gjahr,
                            it_anlc-afabe, it_anlc-knafa, it_anlc-kansw,
                           it_anlc-answl, it_anlc-kaafa, it_anlc-nafal,
                           it_anlc-aafav, it_anlc-aafag, it_anlc-nafap,
                           it_anlc-aafap, it_anlc-nafav, it_anlc-nafag)
                        WHERE anln1 EQ it_finaltab-asset
                          AND anln2 EQ it_anla-anln2
                          AND bukrs EQ it_anla-bukrs
                          AND afabe EQ '01'.
it_finaltab-accq_cost = it_anlc-kansw + it_anlc-answl.
            IF p_posdep = 'X'.
              it_finaltab-acc_dep = it_anlc-knafa +
                                    it_anlc-nafav +
                                    it_anlc-nafag +
                                    it_anlc-kaafa +
                                    it_anlc-aafav +
                                    it_anlc-aafag.
            ELSE.
              it_finaltab-acc_dep = it_anlc-knafa +
                                    it_anlc-nafav +
                                    it_anlc-nafag +
                                    it_anlc-kaafa +
                                    it_anlc-aafav +
                                    it_anlc-aafag +
                                    it_anlc-nafap +
                                    it_anlc-aafap.
            ENDIF.
APPEND it_finaltab. CLEAR it_finaltab.
          APPEND it_equz_dum2. CLEAR it_equz_dum2.
          CLEAR it_itob. CLEAR it_anla. CLEAR it_anlc.
endloop.

Hi,
Please avoid selection in loop. it will lead to major performance issue.
avoid move statements ; instead use assignment.
1st :- select the entire data into internal table
eg:-
SELECT anlnr shtxt FROM itob
INTO table it_itob
for all entries in it_equz
WHERE equnr = it_equz-hequi.
1st select
2nd select.
2nd :- now loop on ur internal table to get the desired result.
it is good to work with internal table rather than select statements in loop.
Regards

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

HT1918 on my account settings the shipping address is set on United States and it seems I cannot change it to UK... so my address is not accepted, what can I do?

on my account settings the shipping address is set on United States and it seems I cannot change it to UK... so my address is not accepted, what can I do?

To change it, you have delete the existing account. However you can avoid losing any pictures in the process. To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll. (Camera roll photos are not effected by deleting the account.)
Then go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.

Dump complete java VM state as core dump (not via OS) possible?

Hi everyone,
I've a problem debugging an application.
Background: Sometimes my application comes to a very unlikely state, which at the moment results in an error message. The stack trace alone has no great value, since this state is cause by the interaction of more than one thread. The state is resolved throwing an exception, the program continues normally.
Goal: If I reach this state, I want to suspend the application, dump the complete state of all java threads, objects, ... (complete java memory core dump) to analyse it later.
Question: Is there a possibility to generate such dumps?
Just thinking:
One posibility would be, to send a signal from the vm to some external program (e.g. udp packet), this program attaches a standard OS-level debugger (e.g. gdb under linux), dumps the core, resumes app, detach. But I guess reconstruction of internal VM state from complete dump is rather hard, is it?
I've looked at jdb, to see if it has some java-core-dump functions, but it seems not to be so. Are there alternative implementations, or helper scripts that make jdb loop over all java object addresses and dump them?
Does someone known about the jdb remote debugging interface? Is the protocol public, can I implement such a feature on myself?

Hi everyone,
I was looking for a way to dump the complete state of a JVM (all runing threads, objects, ...) and afterwards to analize the dumped data. I have found a thread(http://forum.java.sun.com/thread.jspa?threadID=735052) here in the forums with some explainations how this could be done using the Java 2 sdk 1.5.0 - troubleshooting tools (http://java.sun.com/j2se/1.5.0/docs/tooldocs/experimentaltools.html).
I've made a small application, which starts a thread and just prints out continously some messages to the console.
After that I attached with gdb to the running process as described, and generated a core file.
Unfortunatelly on calling jdsadebugd with the core dump it throws the following exception:
jsadebugd /..../jdk1.5.0_07/bin/java core.18294 DebServ
Attaching to core core.18294 from executable /.../jdk1.5.0_07/bin/java and starting RMI services, please wait...
Error attaching to core file or starting server: sun.jvm.hotspot.debugger.DebuggerException: Can't attach to the core file
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.attach0(Native Method)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.attach(LinuxDebuggerLocal.java:258)
at sun.jvm.hotspot.HotSpotAgent.attachDebugger(HotSpotAgent.java:624)
at sun.jvm.hotspot.HotSpotAgent.setupDebuggerLinux(HotSpotAgent.java:610)
at sun.jvm.hotspot.HotSpotAgent.setupDebugger(HotSpotAgent.java:323)
at sun.jvm.hotspot.HotSpotAgent.go(HotSpotAgent.java:298)
at sun.jvm.hotspot.HotSpotAgent.startServer(HotSpotAgent.java:234)
at sun.jvm.hotspot.DebugServer.run(DebugServer.java:94)
at sun.jvm.hotspot.DebugServer.main(DebugServer.java:29)
at sun.jvm.hotspot.jdi.SADebugServer.main(SADebugServer.java:46)
Even if I try to print the shared objects mapping with jmap it fails with the following message:
jmap /.../jdk1.5.0_07/bin/java core.18294
Attaching to core core.18294 from executable /.../jdk1.5.0_07/bin/java, please wait...
Error attaching to core file: Can't attach to the core file
Does anyone have an idea what goes wrong here?

My loop statement in smartforms seems not to be working...

Similar Messages

Maybe you are looking for