My Lumia 620 doesn't connect with the PC

When I use the USB cable for connection with the PC, he shows that there is a connection with a windowsphone, but he shows not any of the maps from my phone??
Does anyone know how I solve this problem.

You won't see the map data files on your phone. The windowsphone OS compartmentalises all the apps and their data files for security reasons. All you will see are user files such as photos, videos, documents, etc. Map data can be managed using the Here Maps or Drive app on the phone.

Similar Messages

My safari doesn't work sometimes, but I connect with the internet.

my safari doesn't work sometimes, but I connect with the internet. Some of the videos I can't see with the Safari browser, but I can see it with other brower. But my friend can see these videos with her safari. And I can not connect with the app store sometimes.

Before you try to configure the settings on your Router, first thing which you need to do is, Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...
Connect the Modem to the Linksys Router on the Internet Port and then connect your computer to the Linksys router on the LAN Port 1. On your Computer click on Start - Run - CMD and click Ok... Now in the Command Prompt window type "ipconfig" and hit enter and note down the "IP address, Subnet Mask and Default Gateway" , Now again in the Command Prompt window type "ping default gateway IP" and hit enter and check if you are getting any replies, If yes then you can login to the setup page of the configure all the settings on it from scratch.
If your Internet Service Provider is Cable follow this link

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

After upgrading to OX mountain lion my apps store doesn't open. App Store cannot verify a secure connection with the App Store. My internet connection is ok but i don't why this happening. What should i do?

After upgrading to OX mountain lion my apps store doesn't open. App Store cannot verify a secure connection with the App Store. My internet connection is ok but i don't why this happening. What should i do?

Hi Tahan007,
Check these threads out:
Cannot connect to the App Store since upgrading to Mountain Lion.
Cannot connect to App Store since 10.8.1
why is my app store sign in saying connection failed?
Also if you're running any anti-virus SW, you might try temporarily disabling it

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

Hi Jake,
Is it connecting to the Router or Modem?
Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6

Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .

Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .

Hello folks
I had the same problem today: Apple TV is blinking light and requesting to connect cable with Itunes (Itunes Logo appears)
I solved the problem according Alley_Cat mentioned and described in link bellow:
In my case, I restored factoring setting using a Micro USB Cable connected in Itunes
Follow the steps carefully described in link bellow
Good luck.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Lumia 620 fails to connect to car bluetooth - coll...

My lumia 620 did initially connect to my ford focus car audi/phone successfully. However after about a week it failed to connect and I haven't been able to connect since. Defeats the object of hands-free!
Steps taken (which work with previous phones of various makes/models):
Turn bluetooth on in car
Turn on phone bluetooth connectivity
Car display finds my phone successfully and provides a PIN to enter in the phone
Phone bluetooth status says 'unable to connect to ford audio system' and times-out.
I've noticed that the 'tap to pair' message doesn't appear as it previously did and I can't find anywhere else to look for bluetooth settings.
A colleague who has an identical phone can successfully connect - it does show the 'tap to pair' message.
I have updated the ford audio system software and checked the other phone connects ok. I have also tried removing the phone battery several times but still no joy.
Help please - thanks

Hi Roshanrims,
Thank you for reaching out to us. Let's go with the connectivity issue first. Are you getting the same issue when you connect your phone to another PC? To further isolate the issue, you can try other troubleshooting steps found on the below link:
• The cable connection to my computer does not work
Note: The link is intended for the Philippines. Let us know your location so we can give you the correct link.
As for the Project My Screen, see this: Project my phone screen to a TV or PC.
We look forward to your reply.

Can't establish a sftp connection with the finder

Hi, I'm trying to establish a sftp connection with the finder (using the "Connect to server" feature) between my (recently purchased) Mac Mini (mid 2011: i5, 2.3 GHz, 2 GB, running 10.7.3) and a Debian Testing box and I can't, I get the following error:
'There was a problem connecting to the server "ip.address"
This file server will not allow any additional users to log on. Try to connect again later.'
However if I try establishing a connection from the terminal (either ssh or sftp) it works flawlessly:
SSH:
victoria:~ RonIn$ ssh [email protected]
[email protected]'s password:
Linux clementine 3.0.0-1-486 #1 Sat Aug 27 15:56:48 UTC 2011 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
You have new mail.
Last login: Sat Apr 28 21:52:18 2012 from ukamy.local
ronin@clementine:~$
SFTP:
victoria:~ RonIn$ sftp [email protected]
[email protected]'s password:
Connected to ip.address.
sftp>
I've searched for a fix or alternative on the internet and I haven't found one that works; The one that keeps coming up is to try: "ftps" as the protocol instead of "sftp" with the remaining information the same (it doesn't work, it gets the same error message afterwards).
The IP address and login information works (corroborated by the fact that I can log in from the terminal from the Mac Mini) so the only issue is with the finder capabilities for establishing the connection. I have looked for apple related documentation or How Tos but I haven't found anything useful.
I don't want to use any third party app or tweak because of the sensitive information that is going to be transfered, I would like to be using strictly the tools from the OS.
If you need any more information please let me know, any help is deeply appreciated.

I have the same issue although i kind of fixed it. I have two admin accounts and one of the account's safari did the same thing as yours, except, it was the startpage and everypage i tried to visit. I reseted safari, as in the erase all data safari in the toolbar, safari-Reset Safari... But safari still didn't work. I logged out and went to my other account and opened safari. Now it works fine on both accounts. This meant safari had to logout before actually working better. I have this a few times these days.

ITunes doesn't connect to the store (no error message, just blank page)

Hi everyone! I'm having troubles with my iTunes for windows XP. It doesn't connect to the music store, it doesn't display any error message and the loading bar stops to a half and then iTunes remains with the blank page, going no further. When I run the diagnostics, it gives me all green dots. So I really don't know what the trouble is... I can only access my accout information and radio stations, nothing more. Can someone help me out please? Thank you very much!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have a ipad mini and it says that it has perect wifi yet when i go into safari it says unable to connect with the server how can i fix this?

I have a ipad mini and i have had it for less then a year, it says that i have perfect wifi up in the left corner where the wifi is always at but when ever i go into the built in safari it says that it is unable to connect with the server. How can i fix this because with out it connecting to the server or internet it is kind of useless to me. I do have ios7 if that helps

The wifi symbol only indicates the presence/signal strength of wifi. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My Iphone 5s doesn't work. When i power on appear searching the sim card, but doesn't connect to the operator. Who can help me?

Hy dear!
My Iphone 5s doesn't work. When i power on appear searching the sim card, but doesn't connect to the operator. Who can help me? I reset the Iphone, but doesn't fix the probem.
Thanks

Hi dear!
I'm very disappointed with Apple products! I was 15 days without my Iphone 5, because it stopped working and the had to be replaced by authorized apple. Then i bought an iphone 5s in two days it stopped working. Doesn't read the sim card. I call to Apple suport and discovery that the model A1533 is not warranted in Brazil and need to be replaced, because there is a hardware problem. In a moment i don't have anyone Phone. Why Apple does not send other equipment equal to authorized to exchange my Iphone, because in Brasil doesn't have the same model? I liked a lot this Apple phone, but i can't use, i have one brand new, but doen'st work. I don't have anybody in USA to exchange in one Apple store. Please help me!
Thanks.

Blackberry desktop software doesn't connect with address book

blackberry desktop software version 2.4.0 doesn't connect with address book on a mac os lion (10.7.4). Sync contacts not possible. Use a BB 9500 v5.0.0.841 (plateform 4.2.0.380). Any solution ?

You have both Desktop Software and Link set to open when a device is connected to your Mac. You need to go to the settings of Desktop Software (I don't recall exactly what to do but there should be some settings in the top right corner) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that Link is set to open. That should resolve your issue.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How can I connect with the AspNetUsers table in MVC 5?

I have a model, in which I have used several foreign keys from other tables. The point is that I also need to get the Id of the user, from the AspNetUsers table, though, I don't know how. I have done something like this, but it doesn't seem to be working:
public class Message
public int MessageID { get; set; }
[Required(ErrorMessage="Please type a message to submit")]
[DataType(DataType.MultilineText)]
[Display(Name="Message")]
public string MessageText { get; set; }
public DateTime WrittenOn { get; set; }
[Required(ErrorMessage="Please select a ticket")]
[ForeignKey("Ticket")]
[Display(Name="Ticket")]
public int TicketID { get; set; }
public virtual Ticket Ticket { get; set; }
[Required(ErrorMessage = "Please select a business")]
[ForeignKey("Business")]
[Display(Name = "Business")]
public int BusinessID { get; set; }
public virtual Business Business { get; set; }
[Required(ErrorMessage = "Please select a user")]
[ForeignKey("aspnetusers")]
[Display(Name = "User")]
public int Id { get; set; }
public virtual ApplicationUser ApplicationUser { get; set; }
When I try to create a controller using the Entity Framework with my model, I get an error message saying:
The ForeignKeyAttribute on property 'Id' on type ... is not valid. The navigation property 'aspnetusers' was not found on the dependent type ... The Name value should be a valid navigation property name.
If someone could help me solve the problem, I would be glad.

Hi Toni,
I see that this particular query is been answered in the following thread.
http://stackoverflow.com/questions/25372436/how-can-i-connect-with-the-aspnetusers-table-in-mvc-5
You can also refer the following links, hope this helps.
http://stackoverflow.com/questions/20071282/aspnet-identity-and-mvc5
http://blogs.msdn.com/b/webdev/archive/2013/10/16/customizing-profile-information-in-asp-net-identity-in-vs-2013-templates.aspx
Regards,
Bharath

Subversion - a repository connection with the supplied URL already exists

Hi all!
OS: SuSe 9.3
jdeveloper:jdevstudiobase10131
I need to create three repository connection to the same URL, with different user but jdeveloper doesn't give me any chance to do it. Returning the following error:
Could Not Create Connection
A repository connection with the supplied URL already exists.
Any idea here?
Thanks
Gilberto
Message was edited by:
gilbertoca

You might be dealing with orphaned site. Go through the following blog post and see if it helps you delete the orphaned sites.
http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=299
Amit

My Lumia 620 doesn't connect with the PC

Similar Messages

Maybe you are looking for