My LV program can't find the iak file when the program is loaded from a different PC.

Hello all,
My LV vi with Fieldpoint I/O and it's IAK file are stored on the company network.  If I load and run the LV vi from the PC it was developed on, everything is fine.  If I load and run on a different PC (that has an identical install of LV), the LV vi can't find the IAK file (all of the I/O pointers to the file are grayed out.) 
Also, if I make an EXE out of the vi on the machine that can find the IAK, it won't find it if it's run from the other machine.
It is not related to whether one machine has different "rights", as they are identical.  It's not related to different installs of LV, as they are identical.   
I have found that this is related to the network login name/password, and to the machine's network name.  If I login on the second machine and try to run the program, it won't find the IAK.  If I point it to the IAK it will run.  If I save it and log out, and then login as a different user with the same rights on the second machine, it won't find the IAK again, until I re-point it there when I re-run it.  This is true for both the vi and the EXE.
This problem makes deploying the EXE difficult to different machines, as the first time it's run, the EXE has to be pointed to the IAK.  Pointing the EXE to the IAK is difficult as these installations have no keyboard or mouse.
Does anyone have any ideas on how to fix this so the LV vi or it's EXE finds the IAK from no matter where it's loaded from?
Thanks,
Mike

Laura,
I figured I'd continue this thread because it's along he same line..
I have two Fieldpoint systems. They are identical, except for one thing...one has an AI-110 in position 7...the other has nothing. Both have the same IP address, etc and I swap the ethernet cable between them when I want to select which one I use.  I use a dedicated ethernet card to the FP processor...and it's not the company net.
There are two IAK files...one for the system with the AI-110, one for the system without the AI-110. The two IAKs are in different paths.
Before I had the system and the IAK without the AI-110, I made an EXE of the code that woked with the AI-110, and it worked fine.
But now if I run the EXE after I've used MAX and opened the IAK without the AI-110, the EXE won't read the AI-110!  I have to go back into MAX and open the IAK that has the AI-110 in it, close MAX and restart the EXE for the EXE to see the AI-110.  (Max is NOT SET to "Download Items on Save")
I looks like the EXE is looking at MAX to get the IAK or a pointer to the IAK.
Did I build my EXE incorrectly?  Shouldn't an EXE completely ignore MAX once it's made?
Thanks,
Mike

Similar Messages

  • I want to change the file location for the automatic backup file bookmarks.file, but I can't find browser.bookmarks.file in the list on the about:config page.

    I asked about automatic backup of bookmarks and received the following answer:You can make Firefox 3 create an automatic HTML backup (bookmarks.html) when you exit Firefox if you set the pref [http://kb.mozillazine.org/browser.bookmarks.autoExportHTML browser.bookmarks.autoExportHTML] to true on the about:config page. That backup is created by default in the profile folder as bookmarks.html, but you can set the file name and path via the pref [http://kb.mozillazine.org/browser.bookmarks.file browser.bookmarks.file] on the about:config page. I went to about:config page and toggled browser.bookmarks.autoExportHTML to “Yes” and it’s working. However, I want to change the file location, but I can’t find browser.bookmarks.file in the list.

    The browser.bookmarks.file preference does not exist by default. Right-click in about:config and select "New > String" to create it.

  • Where can I find my picture files in the finder?

    I download iPhoto with another person's account, so I never could update the new versions; because I don't know the password, and the person cannot enter to the account anymore. Now apple doesn't let me open iPhoto, because the version is too old, 9.2.1 to be exclaty.  Where can I find my picture files in the finder, so I can export them and save them?

    There should be an iPhoto Library in the Users> "user account" > Pictures folder.
    You may also try to see about finding them through the user finder window where it says search for 'all images.'
    Not sure about the rest of that situation.
    Good luck & happy computing!

  • I can't find my root files when I click on the pictures icon in iPhoto

    I can't find my root files when I click on the pictures icon in iPhoto, I'm having a huge problem and I can seem to access the files and not sure where they are?

    See the user tip on accessing your files in iPhtoo
    LN

  • Where do I find the backup files when the iPhone is backed up?

    Where do I find the backup files when the iPhone is backed up?
    Thanks in advance.

    On the Mac they're at ~/Library/Application Support/MobileSync/Backup. But, there aren't files there you can directly use - the backup is actually a SQLite database.
    iPhone Backup Extractor (Google it) is a free Mac utility that can access some parts of the backup.

  • Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

    Hello,
    my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
    Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
    my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
    Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
    Thanks in advance!
    Sincerely,
    hoho33

    "
    Can you restore that JSON backup in a new profile?
    Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
    A JSON backup starts with: {"title":"","id":1,"dateAdded"
    A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
    You can try if you can restore that JSON backup in a new profile.
    Create a new profile as a test to check if your current profile is causing the problems
    See Basic Troubleshooting: Make a new profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
    No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
    MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
    I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
    Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
    I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
    like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
    firefox support won't to help me to solve my problem!
    If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
    like HP, Dell , etc. give remote desktop support to their users!
    Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
    Greetzz

  • How to edit the nbu file when the mobile device is...

    How to edit the nbu file when the mobile device is not connected?
    That software that is available in the nokia site “nokia phone browser” is not useful! Why?
    It is not working unless the mobile device is connected (attached)
    It is quite slow when editing the contacts! (attached)
    Then why the nokia doesn’t offer a simple software that enable us to edit and explore the content of our nbu files?
    Is there some workaround in this regard?
    Is there some software the can edit the nbu files?
    Thank you for the help,
    Best
    Jamal
    Attachments:
    Clip_774.jpg ‏166 KB
    Clip_775.jpg ‏127 KB
    Clip_773.jpg ‏243 KB

    when serializing the DOM, use this: transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, scrReg.dtd");
    Merry Chrasmas too ;-)

  • I can't find adobe premiere files at the directory location...

    adobe premiere is writing files to my hard drive when capturing, but I cannot find the file when I follow the directory path. Need to delete b/c my HD has less than 1 GB left! Any advice?

    Hi Earthhero,
    Thanks for contacting adobe forums,
    It seems like when you did the system restore the OS has removed the trace of the Premiere Pro CC.
    This is common when we run system restore ( or Time Machine on MAC) ,
    We can give a try to get it back.
    Try to rename a folder
    1. Quit the Creative Cloud App first.
    2. Goto the folder C:\Programe Files (x86)\Common\Adobe\caps
    3. Just rename this folder to caps.old
    4. login to Creative cloud app again
    you will see an option to install the app.
    if it works please update us
    regards,
    Sandeep

  • Why does lightroom 5 do not read or can't find my raw files when I'm trying to import my images from my camera to light room

    It just started happening out of the ordinary. I had a photo shoot done today. I came home plugged my camera usb to my mac lap top and tried to import my raw files as i usually do into light room 5 to edit my images. This time the same error message popped up stating it couldn't read or my files weren't found over and over again. Neither the new ones nor the old pictures was able to import them. Please Help!

    I just bought Lightroom and have the same problem - MacBook Pro with OS X 10.10.1. LR actually displays the photos properly when previewing but fails when starting the import. Also, a couple of times it would start but would hang up. I think it may be a Yosemite problem. I was having trouble importing with Aperture too. The fail message from LR was:
    The following files were not imported because they could not be read. (6)
        IMGP7941.JPG
        IMGP7942.JPG
        IMGP7944.JPG
        IMGP7943.JPG
        IMGP7945.JPG
        IMGP7946.JPG
    I can copy the folder from the camera to my desktop and then import. That works but of course I shouldn't have to do that.

  • Can't find my cp files when I publish

    Good morning.  I published a project like I usually do, only this time I am unable to locate my cp files.  Any idea what I am doing wrong?
    Thank you for your assistance.
    Captivating1

    Hi there
    You won't find .CP files in the publish folder unless you are also publishing to the same folder where your project lives.
    .CP files are source files for Captivate projects. What you end up with are files ending in .HTM, .JS, .SWF and possibly other formats.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Listing all the populated variables when a swf is loaded from an embed tag ?

    Hello,
    well, everything is in the title, I've been wondering how I
    could possibily do this for some time now.
    and all I tried or thought of went nowhere.
    I'd like to list all the variables an html embed tag passes
    on to the swf file called, whatever they are named and how many
    there is.
    <EMBED
    src="example.swf?var="varcontent",var2="var2content">
    it's not life-threatening, but I hate using things that work
    when I have an idea for things that would work better x)

    thanks, I didn't think it would be this simple to list all
    var in _root.
    the only issue remaining is the case where I have more than
    one url passed on to my swf file, and how to distinguish which one
    is the one to use, but that's not really feasible (and anyway I
    can't think of a case where more than one var would be passed to
    the swfs I work on, let alone populated with an url).

  • Downloading a pdf file, saving it, won't show the full name of the saving file when the name contains a space, stopping the file name.

    Downloading a pdf file, the name of the file contains a space in the middle of the file. The name showing on the 'Save' popup is the first few letters up to the space. Works fine on IE8. For instance, a file named "old snail_12345.pdf" would only show "old" (ignore the "s). This is on Firefox 30.0, WinXP Pro.

    Is this a problem when you are viewing the file in Firefox's built-in PDF Viewer and using its download button, or when you are using a download button in a web page?
    I've seen this problem occur when the server is pushing a different file name than the actual file name (for example, the file name is pdf.asp?id=12345 but the server is sending the name Annual Report.pdf in the headers sent with the file). I'm not aware of a workaround for the user, but for what it's worth, it is easy to fix on the server by replacing the spaces with %20 (the standard substitution used in web addresses).

  • HT201250 what do I do if my passport for mac does not delete the old files when the disc is full

    What do I do  if the time machine does not delete the oldest files on my passport for mac. I get the message backup failed not enough disc space available

    See Pondini's TM FAQs, for starters.

  • I am working in windows 7 and I am trying to enable the copy/paste and I can not find user.j file in the profile and I am not real sure how to create a file, I can create a folder .

    I am trying to copy text from a word document and paste it into my web builder and it says that firefox does not support copy/paste from clipboard. Went to your site and it tells me to open the user.j file in my profile. This file does not exist and I am not real sure how to create that file so I can paste the fix from your site into it.

    I went to that link and added to firefox add on but it still does not work. I went to the add on option button for this but it told me that my MYSIWG widget was disabled. Does this have something to do with it not working and if so how do you enable it.

  • Erase the datalog file when the exe is running for the first time.

    Hi Freinds,
    I've a req something like this...
    Please assist me so that i could hit the right target.
    A datalog.txt file would be appended with the data everytime i run the exe.
    However if i close (be specific not stop) the entire exe
    And run the exe after opening it for the first time, it should ask me wehther to delete or append the existing datalog file.
    In short whenever running the exe for the first time it should ask the user whether to delete the existing datalog.txt or append the old one.
    THis is my req please help me...
    Cheers,
    Suneel

    You can use an uninitialized shift register, that you wire with a TRUE on the right side. Its output on the left will only be false the first time the VI is run and true for subsequent runs.
    Still, an exe should always run. Design it as as a proper state machine with an idle state when you don't what it to perform anything specific.
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for