My Mac Apple Pro laptop is getting old - anyway, when I turn it on now, the screen just lights up white - and nothing is happening. A few days ago, I had a screen with a flashing question mark, but now just blank white. what to do/how to fix it?
My Mac pro notebook laptop - when i turn it on, it's just a lit up white screen - and nothing else is happening - it's just frozen. how do i fix it?
You may try the procedures in this support article. I suspect a trip to the Apple genius bar will be the best option. You probably have some hardware issues, such as the display or the GPU and the technicians will be to make to make a definitive determination.
http://support.apple.com/kb/ts2570
Ciao.
Similar Messages
-
I have tried to find what to do but nobody seems to have the solution
HI ...
Try this support article > Can't connect to the iTunes Store -
Mac book pro about 4 years old. When you turn on you get the white apple start screen; then a black screen; then no further. On the black screen you can see the pointer, the pointer moves when asked, the pointer gets dark/light with the appropriate keys pressed. Tried turning on/off; also with shift key pressed. But only darkness. Alxat
Hi there Alxat,
You may find the troubleshooting steps in the article below helpful.
Mac OS X: Gray screen appears during startup
https://support.apple.com/kb/TS2570
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
-Griff W. -
I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?
You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033) -
At startup I get grey screen and a folder with a flashing question mark. How do I reset my MacBook Pro to the manufacture defaults?
Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(113954) -
I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?
Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it. -
I have the flashing question mark, but when I press option/alt, I'm only prompted to start the internet recovery. Afterwards the Mac OS X Utilities pops up, but there's no start up disc when I try to reinstall Mac OS x or anything.
Hello, sullivja.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing this issue.
A flashing question mark appears when you start your Mac
http://support.apple.com/kb/ts1440
Cheers,
Jason H. -
My MBP (mid 09)/ folder with a flashing question mark.
My MBP (mid 09) is showing a folder with a flashing question mark. I tried the usual things like PRAM Reset and booting with a external drive. I also changed the hard drive and could use it as a external drive on an other Mac - so this seems to work. Another drive could not be used too. The Apple Hardware Test does not work - my Superdrive is broken. Any ideas?
https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..
well, you know how it is - glitches that usually resolve with a hard reset etc
then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!! -
My CS4 PS no longer recognised the iPhoto library since a new video card was installes a few days ago. How do i fix this? I can drag and drop but then I can't use camera raw feature.Tks
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
Recently some of my contacts are no longer displaying in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Can anyone help?
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
Anyone know what I need to do
A flashing question mark indicates the startup volume cannot be found. Follow the link above for troubleshooting, however be prepared for a failed internal hard drive. If I am correct you will need to take it into an Apple Store or AASP to have the HD replaced.
-
I've had this problem for a while and I thought it went away. I've looked at all of the other discussions and tried what they suggest, nothing. I preferably don't want to erase everything on here. Is there a way to fix it without having to do that? I also noticed that other people have the screen when they first boot their computer. Mine are in the middle of a college essay or browsing online. I would really like to fix this issue. I haven't even had my iMac for a year yet. Any suggestions?
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Following an automatic update, the machine wouldn't boot. Screen came on (shows white) - then either showed a 'No-Entry' Sign and a spinning cog, or a folder with a qusetion mark. I tried to start the machine in different modes ( eg. holding shift after the tone ) but nothing worked. after leaving the machine alone for 1 hour. It worked perfectly again. I did a 'verify disk' check which found no problems. 2 hours later it then froze ( In - Photoshop). Could not force quit, so shut down, and have not been able to boot again since (white lit screen - flashing folder with question mark) . I have also taken the hard drive out and checked the connections which seem fine. Any suggestions? - Is the Hard Drive dead. : other info : It was also running parallels 8, with Windows 7. at the time of the update....
This article may help: A flashing question mark appears when you start your Mac.
-
Flashing question mark, but not drive's fault!
So I got the flashing question mark the other night....went to internet recovery, and it does not see the drive at all. I can't reinstall lion, and I can't repair the disk. When selecting 'startup' disk from the apple menu, there is no disk to select. This a sata II samsung 840 SSD in an early 2011 macbook pro 17".
I decided not to erase the disk, rather throw it into an enclosure to see if it shows up. Sure enough, it does, and everything is intact. So my question is, what has gone on my macbook that isn't allowing it to see the startup drive?Thanks. Just saw this on youtube as well. Ebay it is and we shall see.
Maybe you are looking for
-
Safari 5.1.2 Lion crashes on startup
Hi, I downloaded and installed Safari 5.1.2 when it was released and everything was fine. This evening I left my work and Safari was fine, however when I returned I had a message on screen that Safari had quit working, I restarted it and every since
-
Adding custom fields to table view assignment block
Hi All, I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no busin
-
Hello I got an azerty keyboard on a 8320, with the language in French but when I type anything I get the letters as it would be an qwerty kb. I went through the menu but can't find the solution thanks regards Richard
-
My iPod touch 5th generation isn't working. I plugged it in last night to charge and now its not turning on or responding to anything. It used to do this thing where it would freeze when it was 100% charged and plugged in and I was using it. I'd ju
-
I recently purchased a new MacBook Pro and have a long flight tomorrow. I'd like to purchase some TV shows or Movies from the iTunes store, but after I enter my password and attempt to purchase a message appears and says that an unknown error has occ