My mac become more slower after update to Mountainlion

My mac become more slower after update to Mountainlion
What shoudl I do? can you guys help me? BTW I have update my RAM to 8G
Thank you

What is your Mac?
What did you update from? 10.6 or 10.7?
If from 10.6 or your machine was at 10.5 at one time, it might be too old/slow for 10.8, you might want to revert to 10.6 again.
How to revert your Mac to Snow Leopard
What do you notice is slower than before? Like Internet or booting or loading programs or UI feel or what exactly?
If it's the Internet, then check this out
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots
Now a fresh install of OS X usually does wonders, this would mean you will need to take acurate account of your installed programs, passwords, export bookmarks and backup all your data to a external storage drive. Keep the boot drive data below 50% filled ideally, (not much for you apprantly, just reduce 50GB of data)
Most commonly used backup methods
Write down your AppleID and password to reinstall 10.8
When your sure, then hold command r boot into Recovery, use Disk Utility to Erase (middle selection) the Macintosh HD partition and wait, it's going to map off fialing sectors. When done quit and reinstall 10.8 fresh and install programs and files from backup into the same named accounts.
https://support.apple.com/kb/HT4718
That should make things zippy again. Also a #12 OnyX cache cleaning routine
Step by Step to fix your Mac
Another method is this, it's a defragging/performance speed up step, you won't have to reset everything up again from scracth like a fresh install method does. But it requires paid software and a external drive, but makes a excellent bootable backup in the process that can save your behind one day.
How to properly defrag a Mac's hard drive

Similar Messages

  • Power mac become stupidly slow after update from 10.4.7 to 10.4.8

    Hey people. My Power mac takes on average 3mins 30 to start up after i updated from 10.4.7 to 10.4.8 . Before it took on average about 50secs to start up and get a application running. Are any of you experiencing this problem. I have only used 50gigs of space. I have done system recoverys and this still happens

    i have checked. it will have the have the white screen where you see the apple logo and the loading cursor. That lasts about 40secs. Then it will it will show the loading bar. Thats lasts about 30secs. then it will show my desktop background image. It takes about 40secs to load my desktop items. then it will take about a min after that to show my username,time,Country flag,Volume control and my wireless icon in the top right hand corner. I have done 4 system restores, my recovery disks start at 10.4.4 it will work fine all the way up until 10.4.8. Is there a major bug in the upgrade or what?

  • I have a BookPro 15 2.2 GHz Intel Core 2 Duo with 4 GB Ram, that's more slow after updating to X Lion 10.7.5

    Hello
    I have a BookPro 15 2.2 GHz Intel Core 2 Duo with 4 GB Ram, that's more slow after updating to X Lion 10.7.5
    Is my hardware not good for this new OS ?
    Can I upgrade my computer to Mountain Lion OS  and make it faster ?

    Mountain Lion won't make it faster. It may not even be compatible.  Speed has a lot to do with what is installed, installation of utilities that actually slow you down, such as MacKeeper, or any cache cleaning softawre.  Installation of utilities that you don't need such as anti-virus or firewall software.  Peer2peer software.  Other devices sharing the same network can slow it down too, make sure your network is secure, and you know what is sharing the network.  Some websites may be slower on Safari, and an alternative browser* is needed.

  • Mac got really slow after updation of os X and some application misbehaving and not able to open them.

    Mac got really slow after updation of os X and some application misbehaving and not able to open them.

    Apply the combo update
    http://support.apple.com/kb/DL1640

  • Why is my mac a lot slower after updating to 9.2. ?

    Hi! My Mac is so much slower after updating it to 9.2., I installed Java but I read at some forums I should delete it, but I dont know how. Can somebody help me?
    My system review in Etrecheck is:
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 6 days 11:48:20
    Disk Information:
              TOSHIBA MK3265GSXF disk0 : (320,07 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) / [Startup]: 319,21 GB (50,46 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS31N 
    USB Information:
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              com.logmein.driver.LogMeInSoundDriver          (1.0.3 - SDK 10.5)
    Launch Daemons:
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.logmein.logmeinblanker.plist 3rd-Party support link
              [System] com.logmein.logmeinserver.plist 3rd-Party support link
              [System] com.logmein.raupdate.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
    Launch Agents:
              [System] com.divx.dms.agent.plist 3rd-Party support link
              [System] com.divx.update.agent.plist 3rd-Party support link
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.logmein.logmeingui.plist 3rd-Party support link
              [System] com.logmein.logmeinguiagent.plist 3rd-Party support link
              [System] com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] org.macosforge.xquartz.startx.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
              [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
              [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
              [not loaded] com.google.GoogleContactSyncAgent.plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.spotify.webhelper.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Spotify
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              OVSHelper: Version: 1.1 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
              Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5 3rd-Party support link
              Silverlight: Version: 5.0.61118.0 - SDK 10.6 3rd-Party support link
              LogMeIn: Version: 1.0.935 - SDK 10.7 3rd-Party support link
              DivX Web Player: Version: 3.1.1.9 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              LogMeInSafari32: Version: 1.0.935 - SDK 10.7 3rd-Party support link
              googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.7
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              Slick Savings: Version: 1.0
              Amazon Shopping Assistant: Version: 1.1
              Searchme: Version: 1.2
              Ebay Shopping Assistant: Version: 1.1
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              PSPlugin: Version: (null) 3rd-Party support link
    3rd Party Preference Panes:
              Java  3rd-Party support link
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              /Library/Application Support/DivX
                        DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                        DivXTransferWizard:          Version: 10.1.1 (Build 10.1.1.44) - SDK 10.5 3rd-Party support link
                        DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft Communicator:          Version: 13.1.2 - SDK 10.5 3rd-Party support link
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              iSkysoft Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/Helper/iSkysoft Helper Compact.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              Microsoft Communicator:          Version: 13.1.3 - SDK 10.5 3rd-Party support link
              DivX Converter:          Version: 10.1.1 (Build 10.1.1.67) - SDK 10.5 3rd-Party support link
              DivX Player:          Version: 10.1.1 (Build 11.3.1.8) - SDK 10.5 3rd-Party support link
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  15%          fsck_hfs
                   7%          Disk Utility
                   7%          WindowServer
                   2%          diskmanagementd
                   2%          EtreCheck
    Top Processes by Memory:
              217 MB          com.apple.MediaLibraryService
              172 MB          iTunes
              156 MB          fsck_hfs
              106 MB          Google Chrome
              98 MB          mds_stores
    Virtual Memory Information:
              13 MB          Free RAM
              1.01 GB          Active RAM
              1.01 GB          Inactive RAM
              1015 MB          Wired RAM
              21.27 GB          Page-ins
              435 MB          Page-outs

    You are using all your 4GB of RAM
    Virtual Memory Information:
              13 MB          Free RAM
              1.01 GB          Active RAM
              1.01 GB          Inactive RAM
              1015 MB          Wired RAM
              21.27 GB          Page-ins <---------
              435 MB          Page-outs
    When you run out of real RAM you start writing to free hard disk space. This is paging in/out. This is much slower than using real RAM
    Add more RAM Basics
    Open System Profiler > Hardware
    Copy the Serial number and model identifier
    Under Memory in System Profiler, you'll see how many slots and what is installed. You need matching pairs. Most likely you will have to replace RAM you have installed unless you have 4 slots and are only using 2 slots.
    Go to this page:   http://support.apple.com/specs/
    Copy the Serial number in the "Search Tech Specs" search box. This will take you to the info on your computer.
    Next using the Identifier and with the knowledge of your exact model and how much RAM you can install, go to this site: (There are several sources for memory. This one has good prices and has the video showing how to install)
    http://eshop.macsales.com/shop/memory/
    You can find install videos here:  http://eshop.macsales.com/installvideos/
    Hope this helps!

  • Mac is much slower after update

    why does it take 3-5 minutes longer to start up my mac after I updated from 10.6.4 to 10.6.6? I noticed that it got slower after I first installed 10.6.5... but its really weird!

    the hard drive was failing

  • Mac OSX very Slow after update iLife

    Dear all;
    I just faced problem with my Mac OSX 10.8.4 after upgrade the iLife, the OS freeze then logout from the system
    any ideas how to solve this problem?
    Regards;

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Skype runs much more SLOWER after update to 7.2.0....

    Hello skype, 
    This problem is like an eternal issue you have.
    Let's take a look my PCs (I am working with 2 PCs) specs here (it seems people like to ask about it):
    Windows 7 64 Bit / Windows 8.1
    4 GB DDR3 RAM / 8GB DDR3 RAM
    Once upon a time, before upgrading my skype to 7.2.0.103 I found that the booting time for skype to runs on my PC was slow (it's about 3-5 minutes), well I don't really care about it until one day I choose to upgrade my skype to the latest version (today is 7.2.0.103) and hope that the issue will be fixed.
    But guess what, it become worst than before. These are the issues I found on it:
    Booting time extremely slow
    Always (means 100%) freeze when opening a group chat
    Often (not 100%, but it close to 100%) "connecting...." when transferring files
    So, what should I do?
    P.S. :
    I was wondering whether it's due to the very very very long chat history I have. Yes, we're using skype here to work so almost all communication (the fast one) will be done in skype chat window. 

    All iPhones require activation after a restoration and an iOS upgrade.  There really was no reason to throw your deactivated SIM  from AT&T away.  You'll need an AT&T sim to activate that phone.  It doesn't need to be active, however.  Borrow one from someone to get your phone activated

  • Why my Mac Pro 2009 became too slow after updated Yosemite?

    Why my Mac Pro 2009 became too slow after updated Yosemite?

    When the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • After pressing 'shift' , mac become really slow!

    I realy got crazy on my mac....
    last year i found that my mac's "shift" key was kept being pressed   
      so i sent it to Apple,and they fixed it
    but after about 2 days of normal status,my mac become incredible slow.....
    I cant even do my typing normally...
    but this time i let a friend of mine to fix it, and he removed the ox system i had,repalced with XP
    the XP runs great
    but i didn't do much things in XP,cos  i don't like it
    so i turn my mac into OS system again
    then my mac runs normal
    but the whole things turned into a tragedy angain after i pressed "shift"
    mac become really slow ,and makes out big noise!!!  I couldn't bear it , it's now the worst machine i have
    is anyone figure out the real problem with my mac?
    does it still a hardware mistake with my "shift key"  ?  i would be really appreciate if u can solve my problem!!

    You should update to the latest version of Snow Leopard (it is now at version 10.6.8) and see if this helps. This will also install a number of security updates to help protect you from potential viruses.
    The few other things I can suggest to try are:
    1) checking the hard disk by running "Verify Disk" in the Disk Utility program (see the Apple KB article at http://support.apple.com/kb/HT1782 for instructions)
    2) check and repair file access privileges (see Apple kb article http://support.apple.com/kb/HT1452)
    3) make sure the Startup Disk System Preference shows the Macbook Air's hard disk is selected.
    Sorry I have no experience with Chinese input on the mac, however I did find this website http://www.yale.edu/chinesemac that may further help. Good luck!
    Rob

  • First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
    Settings>General>Reset>Erase all content and settings

  • Mac mini 2010 very slow after update to Mavericks

    My mac mini 2010 (2.4 Ghz, 8GB ram) is running really very slow after updating to Mavericks.
    Clearly OneDrive is a pain... but had it running on ML as well, and though it is a memory and CPU hog, it never really slowed down the system.
    This is what Etresoft says:
    EtreCheck version: 1.9.15 (52)
    Report generated 21 Aug 2014 19:39:34 GMT+2
    Hardware Information: ?
      Mac mini (Mid 2010) (Verified)
      Mac mini - model: Macmini4,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
      8 GB RAM
    Video Information: ?
      NVIDIA GeForce 320M - VRAM: 256 MB
      32LG3000 1360 x 768 @ 59 Hz
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 1 day 0:0:8
    Disk Information: ?
      TOSHIBA MK3255GSXF disk0 : (320,07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209,7 MB
      Macintosh HD (disk0s2) / [Startup]: 319,21 GB (104,99 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      HL-DT-STDVDRW  GA32N
    USB Information: ?
      Western Digital Ext HDD 1021 1,5 TB
      S.M.A.R.T. Status: Verified
      BigOne (disk1s1) /Volumes/BigOne: 1,5 TB (16,45 GB free)
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Logitech USB Receiver
      Logitech USB Receiver
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) Support
      [not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
      [loaded] com.iospirit.driver.rbiokithelper (1.18.1 - SDK 10.6) Support
    Problem System Launch Daemons: ?
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.wdhelper.plist
    Launch Daemons: ?
      [loaded] com.iospirit.candelair.daemon.plist Support
      [loaded] com.iospirit.candelair.sync.plist Support
    Launch Agents: ?
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
      [loaded] com.google.keystone.agent.plist Support
      [running] com.plexapp.helper.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ?
      iTunesHelper
      Preview
      ElementsAutoAnalyzer
      Google Chrome
      SEC Helper
    Internet Plug-ins: ?
      Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Candelair  Support
      Perian  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 199.51 GB
      Destinations:
      BigOne [Local] (Last used)
      Total size: 1 TB
      Total number of backups: 84
      Oldest backup: 2013-07-17 22:07:43 +0000
      Last backup: 2014-08-21 17:31:13 +0000
      Size of backup disk: Excellent
      Backup size 1 TB > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          78% OneDrive
          3% ScreensharingAgent
          3% WindowServer
          0% Google Chrome
          0% fontd
    Top Processes by Memory: ?
      1.18 GB OneDrive
      90 MB Google Chrome
      82 MB Finder
      57 MB mds_stores
      51 MB Google Chrome Helper
    Virtual Memory Information: ?
      4.46 GB Free RAM
      1.94 GB Active RAM
      321 MB Inactive RAM
      908 MB Wired RAM
      3.02 GB Page-ins
      506 MB Page-outs

    Chances are you have applications that are out of date and need to be updated. Another possibility is Spotlight is indexing and you to wait until it has finished.

  • After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

    After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • HT2848 hi my mac ppc g5 very slow after update mac os x 10.5.8

    hi my mac ppc g5 very slow after update mac os x 10.5.8

    See if you can hop over to the PowerMac forums.

  • HT4623 i have dought if my iphone 4 will not work properly, as i heard it become slow after update ios7 , can someone help me out what to do.. ?

    i have dought if my iphone 4 will not work properly, as i heard it become slow after update ios7 , can someone help me out what to do.. ?

    Hello there, morganbailey02.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

Maybe you are looking for

  • 2nd iPod in a row saying "Disk cannot be read from or written to." Help!

    My setup is as following: MacBook Pro 2.16 Ghz Intel Core Duo Mac OS X 10.5.2 Lacie 250GB External Hard Drive attached via Firewire iPod Classic 160GB Black iTunes 7.6.2 - Library has about 16,000 songs Using the above setup, my 5th Generation iPod,

  • Simple HTML placeholder page

    Hello, I'm running ITS Version 6200.1034.9372.7, Build 1093429 WIN32. We are migrating from an external ITS server to an internal ITS for the BBPSTART Internet Service (SAP SRM 4.00 eBuying). Because many employees have the old URL (external ITS) in

  • Viewing only x number of digits for double or float

    I was wondering if I had a float or a double, and lets say I didn't want to see all those decimal places, is there a way for me to limit the number of decimal places that is outputted to like 3 or 4 instead of 10? Thanks for the help.

  • IPhones and music in corporate environment

    We have a recentley rolled out a small number of iPhones in our company. We have used the config utility to block itunes usage. I would still like the users to have the use of the iPod on the iPhone to play music. Is this possible? If so, how? Keepin

  • How to install 3 apps out of 67 onto iphone.

    I just want to install a select few of the available apps from the store to the phone.  It gives me the option to select all the apps that will replace the ones on the phone or just select none and then none will be installed.  I have read the instru