My mac book air shuts down unexpectedly if i dont continuosly press a key r  move the mouse why

Hi my name is Eric. A month ago my mac book air was in the bathroom with me and i guess moisture got in my apple. When i turn my apple on what happens is that is would turn on normally and run normally but  would have to keep tapping a button or keep moving the mouse continuously,  If i do stop doing either or my macbook air would shut off . I could use the internet and run programs. People are telling me its the Harddrive but its an expensive fix. I just wanted to know if that is the real problem or is there something else i could do

It could be any number of things... check your battery status and energy control settings... if your battery is old and doesn't hold a charge well energy saver might power-down to prolong life. Does this behavior occur when you are plugged into a wall outlet?
You could have a corrupt Energy Saver .plist file (preference file) often when Apps behave strangely it can be a corrupt .plist file. Trashing the
It might be a shorted top case keyboard (your description alludes to liquid damage - did liquid touch/enter the machine or was it excessive humidity?)
It could be a hardware issue (corrosion build up).

Similar Messages

  • Mac Book Air shuts down completely if I close the cover and leave for hours.  Message: you shut down your computer because of a problem.  Any thoughts what is happening?

    Mac Book Air shuts down completely if I close the cover and leave email running.  Is n't it supposed to just sleep and awaken whe the cover is reopened?  Instead, I have to boot it.  Any idea what the problem is?  I am unaware of any problem, just close the cover for safety.

    Well I don't know anyone that closes the cove and leaves it for Hours... But try going to System Prefrences > Energy Saving > Uncheck Put Hard Disk to Sleep.

  • My Mac book pro Shuts down unexpectedly

    This problem started barely last night, when I was using my Mac book pro when suddenly it shut down. The first thing that came up to my mind was that it was a battery issue, but I have notice that the laptop only shuts down when I type something in the keyboard. Could this be caused by the keyboard, or is a battery issue, or is it something else more serious?

    Try resetting your SMC and PRAM.
    Resetting the System Management Controller >>
    Also, note the exact time the issue happens and check your System logs in your Console application for clues to the cause.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • Mac book pro  shut down unexpectedly

    After this update (Lion 10,7,2) ,i still have the same problem Each time i use mission control or after the second atempt i get the black screen, mac is restarting and so on. Is this a Lion problem ?

    If your on 10.5 like your signature says, Apple isn't issuing security or stability updates for your OS X version.
    I've seen a lot of posts from 10.5 users today, I suspect malware has been unleased.
    http://ps-enable.com/articles/diginotar-revoke-trust
    All you can do is erase and reinstall, or archive and install by holding c and booting from the 10.5 disk.
    You might want to upgrade to 10.6, it will run your 10.5 software mostly, just a update.
    10.7(or 10.8 this summer) will require a newer machine, newer third party hardware and newer software to work with it, your 10.5 software and older third party hardware will/likely/may not.
    edited for clarity.

  • Why does my mac book keep shutting down? I mean it's on and then off suddenly

    Why does my mac book keep shutting down? I mean it's on and then off suddenly

    Do any informative dialogs appear after you restart it?
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC on Mac portables with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Still having problems? Replace steps 6 and 7 with the following:
    Reconnect just the MagSafe power adapter.
    Press the power button to turn on the computer,
    Then reconnect the battery.
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.

  • My Mac book pro shuts down after starting

    My Mac book pro shuts down after a few second. I have to press the start button multiple time before uploading

    MacBook Pro (17 -inch, Mid 2009) OS X Yosemite Version 10.10.2
    Processor 2.8 GHz Intel Core 2 Duo
    Memory 8 GB 1067 MHz DDR3
    Startup Disk Macintosh HD
    Graphics NVIDIA GeForce 9400M 256 MB
    Serial Number W8******8YB
    Disk Utility Message:
    Repairing permission for "Macintosh HD"
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOSARDAge nt" has been modifiedand wil not be repaired
    Group differs on "Library/Printers/InstallerPrinters.plist";should be 80; group is 0.
    Permission differs on "Library/Printers/InstalledPrinters.plist" should be -rw-rw-rw ; tey are -rw-r---r--
    Repaired "Library/Printers/InstalledPrinters.plist"
    Group differs on " Library/Preferences/com.apple.alf.plist" should be 80; group is 0.
    Repaired "Library/Prefernces/com.apple.alf.plist"
    User differs on "private/var/db/displaypolicyd"; should be 0; user is 244
    Group differs on "private/var/db/dispaypolicyd:; should be 0 group is 244
    Repaired "private/var/db/displaypolicyd"
    Permission repair complete
    I was not able to fix the problem,
    TinTin 15
    <Personal Information Edited by Host>

  • My Mac book pro shut down after getting a low battery message, and now or won't start at all. It's plugged in now and nothing, no fan, no chime when I hold down the power button

    My Mac book pro shut down after getting a low battery message and now it won't start. Any ideas?

    Hey Citrinesky,
    Thanks for the question. I understand your MacBook Pro is not responding. The following resource may provide a solution:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Thanks,
    Matt M.

  • HT3986 i was trying to download windows 7 on mac book air 10.8.2.seems like i didnt copy my windos disk on the usb properly at the begining,so after the boot camp steps the screen is black and telle me to put the write disk.

    i was trying to download windows 7 on mac book air 10.8.2.seems like i didnt copy my windos disk on the usb properly at the begining,so after the boot camp steps the screen is black and telle me to put the write disk.
    eventually i made a coorect usb windows 7 and put it back to continue as it was saying so,but there is no change and the screen still is dark and says no bootable disk ,insert.
    how to solve the problem?

    Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
    I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
    Thanks to BobTheFisherman for the link.
    There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
    Give it a try. You might like it or it may not be your cup of tea.

  • I have lightroom 5 on my i mac.  I want to download it on my mac book air that doesn't have a disk drive.  I want to use the same license.  How do i do this?

    I have lightroom 5 on my i mac.  I want to download it on my mac book air that doesn't have a disk drive.  I want to use the same license.  How do i do this?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive

    i recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive.. is this possible and for how much? its only a week old.

    Your 14 days are up, however you could take your case to Apple Inc. regarding same,
    however those are the stipulations.
    RAM cannot be upgraded however, period, its permanent on the logic board after mfg.
    As for the SSD (solid state drive), upgrading same is a bad premise 9 times out of 10.
    No notebooks is a mass storage device, and you need an external HD for data redundancy and backups regardless.
    data that is static on your SSD and not used very often has no logical reason to be ON the notebooks, and best saved on a superslim external HD ($60)
    SSD are very expensive, even a small one,  HD are cheap as dirt and users are recommended to have one regardless for many good reasons.

  • HT204150 Following problem: I have around 600 contacts on my iphone and Ipad and would like to sync with contact list on my mac book air but its not working and whatever I do I get stuck on the 44 contacts I have on my mac  contact-list. Please Help!!!! 

    ollowing problem: I have around 600 contacts on my iphone and Ipad and would like to sync with contact list on my mac book air but its not working and whatever I do I get stuck on the 44 contacts I have on my mac  contact-list. Please Help!!!!  thanks

    First, be sure that the contacts on the devices are in the "icloud" section and not the "On my iPhone" (or iPad) section of the contact listings/groups.
    Missing contacts:
    Here's a test to perform - using a computer's browser, log into icloud.com and go to the Contacts page.  If most of them are gone, then they are gone. 
    If they show up, then the problem is that your device is not connecting to the Contacts database on icloud. 
    On the device, go to Settings>icloud.  Be sure icloud is on and using the right ID.  If not, scroll to the bottom of the page and tap Delete Account - this just disconnects the device from that account, no data is lost.  Then log back in using the correct ID.  ALSO - be sure the Contacts are turned on (on the same screen).
    Note:  Contacts are not part of an iCloud backup, since they are part of contacts database on iCloud's servers.   So performing a restore will not help.
    Contacts are gone from icloud.com.
    Then they have been deleted.  There are many reasons for this.  One possibility is that someone else is using the same iCloud account (family member, etc.) and they deleted contacts, thinking they did want them on THEIR device.  How to get them back?  Unfortunately, an iCloud backup does not include any of the sync databases, like contacts, notes, calendars, reminders, etc. because the data is already stored in these databases.  Your only hope for restoring the data is if you had that data on a computer (like a mac's Contacts, Calendars, etc.) and that data was backed up using whatever backup software you typically use (e.g. Time Machine on a mac).  Just restore the data files back to the computer.  Other than that, I'm afraid the data is gone.

  • MacBook Air shuts down unexpectedly

    MacBook Air (2012) keeps shutting down unexpectedly. And then shuts down during start up several times before it works again.
    I was getting an "Error: shrinkdb"  message in console for a while.
    I tried reinstalling Yosemite which did nothing. I also tried downgrading to Mavericks which also did nothing.
    I've verified/repaired permissions and the disk several times successfully with no change.
    I've also got the message "unlink of file /users/***/Library/Caches/com.apple.Safari/fsCachedData" in console.
    Also when repairing permissions I've gotten this message: warning: SUID file "system/library/coreservices/remotemanagement/ardagent.app/contents/macos/ardag ent" has been modified and will not be repaired

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Mac Book Pro shuts down suddenly

    I have been using my mac book pro without problems. All of a sudden I cant move the mouse anymore and the computer shuts down. It will restart itself with a message that reads something like your computer is restarting in 15 seconds or so but click anywhere to get in. Its just weird. I dont see any problems other than it does say I need to service battery. So is this the intial problem or is it something else? What can I do? Am I damaging my computer if I need a new battery? Help please....!

    first if you are getting message that your battery needs service, you want to get it looked at either by going to apple store or service provider.
    try doing an SMC reset, the following article tells how:
    http://support.apple.com/kb/HT3964
    after this reset restart the computer and see if it works normally if it doesn't see below.
    second regarding the restart of your computer, it could be a kernel panic. the following article tells how to troubleshoot this issue:
    http://support.apple.com/kb/TS3742
    if after following this article the mac continues to restart try running the apple hardware test to see if there is a hardware issue:
    http://support.apple.com/kb/HT1509
    if none of the above steps resolve your issue i would take to apple store or service provider to have it serviced.

  • Hi, I can't sync my Mac Book Air and iPhone5 calendars. I get a message from iTunes saying that the sync server failed to sync iPhone.  Any explanations and/or solutions?  Thanks.

    What can I do to sync Mac Book Air and iPhone 5 calendars if the iTunes message says that 'the sync server failed to sync iPhone'?
    Thanks,
    Julian

    Read the KB. Earlier today I had a fail to sync - I closed my Calendar app and the reopened and all was good.
    Sometimes just closing the app the relaunching is all it takes. At other times a reboot of the Mac is all that is needed.
    MJ

  • Why won't my Mac Book Pro shut down?

    My Mac Book pro isn't shuttting down. I've clicked the apple icon on the left > shutdown. But nothing happens it just shows this rainbow wheel for a few  seconds. I can't also control my volume and screen brightness with my keys any more and system preferences is not responding.. Help! Please!
    Thank you!

    Alright.., I will try this and hope i´ll do it right. My (a little older ) MacBook Pro has the same problem, it just wont shut down. Things works kind of fine until I shall shut it down, cause then the wheel will spin and spin and spin (and it goes to sleep still spinning), so it must be some corrupted files or app that is stuck. I just bought MacOs10.6.3 to reinstall or recover the harddrive, but I´ve never done these things on a Mac before. I have formated in Windows alright, but I am worried about the drivers, I dont know how to back them up! ??? Where do I find them? I hope I dont have to wipe the disc out fully, that it helps with just some cleaning up. I will come back after my "operation".. please wish me good luck! I really dont want it to crash completely.. Thank you for all the information I had here. See you soon.. '
    / Maria

Maybe you are looking for

  • Will HP ever be issuing a Windows 7 Driver for Color Laserjet 3500

    When I did installs of Win 7  several months ago, my 3500 worked and could be shared.  When I had to do a Win 7 install a few days ago, I lost support for this printer.  All installs were "upgrades" to XP.  It worked for months. I have to be printing

  • Asset under constructions

    Dear Experts, I am new to this concept When i am settlement of AUC to main i asset i want create one cost element for external settlement. cost element catagery 22. My doubt is this cost element comes under expences or revenue. Regards venkataswamy

  • How do I attain color separation in InDesign that containes Photoshop Images?

    Thank you for your time. I have to submit an ad that will print black with spot color (Cyan). Below (Image 1) is the ad that does not contain color separation. The publisher said that I have to provide an ad that allows for color separation, without

  • Stop LW 360 config page from printing on power-up?

    I know this has been asked and answered many times long ago, but I can't find the posts any more. Is there a way to stop the LaserWriter Pro 360 from printing a configuration page every time upon power-up? Its print queue is set up as an IP printer u

  • How to use the RFC SDK as part of a QTP test script

    Hi there, after having recorded some business transactions, I want to insert some checks into the QTP test script: an easy example would be an existence check in a database table. Instead of recording a SE16 or SE16N, I would find the approach much m