My Mac Book Pro 17" has a blank screen and won't boot up?
My Mac book Pro 17" the screen started to scramble and I restarted the computer....I then got a grey screen and the computer never booted up again....Any ideas?
Hey Julius62,
Thanks for the question. After reviewing your post, it sounds like you have a gray screen during startup. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Mac OS X: Gray screen appears during startup
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Similar Messages
-
IPod has a blank screen and won't do anything?
I took out my iPod 5th gen to check the time and it was fine. Then I took it out 5 minutes later and it had a black screen so i clicked the home button. Nothing happened. I've tried the power button, the home button, holding down the power button, and plugging it into a charger and nothing has helped. It's still on a black screen and won't respond to anything I do. What should I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch has a blank screen and won't turn on. Help?
It went blank and I've tried to restart it (pressing the home and screen buttons) but that won't work either. I've connected it to a computer but the computer doesn't recognise it. It's been an hour and it still won't work. I even tried connecting it to the portable speaker which also charge and it won't do anyhting with that eiher.
also I'm not sure which operatine system it is. iSO something. he most recent one you can get on an iPod touch.1; Do a hard rest by holding the buttons at least 15 seconds. Does the Apple logo come on?
2. Hold the power button down for at least 5 seconds. Do you see the battery symbol?
If the answer is no to both questions, you most likely have a hardware issue--possible bad battery.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Hello.
I recently woke up this morning to use my iPod Touch (2nd Gen) to find that it was completely unresponsive to both buttons and would not turn on. I had been using it the night before and had not charged it. Thinking the battery was drained, I plugged it into a wall outlet for two hours, and still no sign of life on the iPod. Plugging it into the computer, it immediately showed up in iTunes and synced normally, and even indicated it had nearly a full charge. Still, however, the screen showed nothing. I checked the lock and home buttons to see if it was stuck, but it was not. Does anyone have an idea of what this is? Do I need to get my iPod repaired? Any help would be appreciated.
I am running iOS 4.1, and am out of warranty coverage.
Thanks,
- Justin1; Do a hard rest by holding the buttons at least 15 seconds. Does the Apple logo come on?
2. Hold the power button down for at least 5 seconds. Do you see the battery symbol?
If the answer is no to both questions, you most likely have a hardware issue--possible bad battery.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
My late 2006 Black MacBook has a gray screen and won't boot.
My late 2006 Black MacBook has a gray screen, folder icon, and flashing question mark. I replaced the HD with a Western Digital 500 GB and had no change. What's wrong with my MacBook?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive Operating System data is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
Once it has finished booting and you Choose Your Language and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I have a 15 inch Mac Book Pro bought in October. Screen is randomly going blank. How can I fix this?
I have a 15 inch Mac Book Pro bought in October. Screen is randomly going blank. How can I fix this?
.. check your screen saver setting.. otherwise take it to the Apple Store to see a Genius.
-
does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?
Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718 -
have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair disk and needed to format and start again.
comp said it could not unmount disk and now when comp trys to boot all i get is a question mark on the screen. helpErase and Install
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU after formatting completes and return to the installer. Install Snow Leopard.
5. After restart into Snow Leopard download and install Mac OS X 10.6.8 Update Combo v1.1. -
I`ve just bought a Mac Book pro 15", did the required updates and since two days ago it freezes. Now I can´t even start the computer. the screen is allways white. how can I solve this issue??
The same thing happened to me... Since two days the ******* thing keeps freezing after a while. Then I try to reboot and the screen goes white and it doesn't boot. If I wait like half an hour it boots again.
I thought it was a hardware problem, but the Apple Hardware Test founds nothing at all. I think it has to do with the software update I performed 2 days ago.
(MacBook Pro 15" Early 2011) -
My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...
There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote. -
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
my mac book pro version 10.6.8 screen brightness doesn't increase its just black but can see icons when m 2 close to the screen..how can the problem be solved
Try resetting the SMC http://support.apple.com/kb/ht3964
You can get an idea for repair from these site. Check locally for your area.
https://www.techrestore.com/mac/
http://www.dttservice.com/macbookprounibody.html
http://www.myservice.com/macbookpro.html
http://www.ifixit.com/Device/MacBook_Pro
http://www.PowerbookMedic.com -
I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.
I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
Not happy with Mac book pro retina because of black screen problem.
I am not happy with Mac book pro retina because of black screen problem. This screen failure appears after one year. I was fan of APPLE now I do no support any apple products. When they expires I will renew them with the other products belong to the other companies.
You are entitled to 90 day telephone support from Apple. Try contacting them.
Apple Support Contact
Apple Support contact - Telephone -
I have a Mac book pro on vesion 10.6.8 and want to access icloud as it works great on my iphone 4. Not sure best way to upgrade as some of the review of Lion on the appstore are awful. Any advice as I also have MIcrosoft word etc and don't want to have to purchase these again.
That is the best list ever for Lion compatibility!
You can also do this:
Launch the programs you know and love on your Snow Leopard Mac.
Utilities --> Activity Monitor
Under the "Kind" tab it will identify the programs running PowerPC, Intel and Intel 64.
No PowerPC apps will run under Lion.
Don't worry about Apple's system stuff like Mail, iCal, Safari.
Don't worry about the system processes, like fontd and launchd, those will be replaced if you go to Lion.
Just look for the programs that you need.
Maybe you are looking for
-
Hi everybody, I'm trying to set up the SSO with Logon Tickets between the Portal and an ECC 5.0 System. I've done all the configuration steps on the portal and system side as read in literature and here on the forum. But when I try to test the conect
-
Hello my mid-2009 Macbook Air 13'' froze while upgrading to OS X Lion. After 5 Minutes therefore pressed the reset button. However, when I tried to restart it nothing happend. I can hear the ventilation but it doesn't even attempt to boot. I therefor
-
JCo Outbound( calling Java Function from ABAP )
HI, I want to call a JAVA function from ABAP.I have installed the JCo toolkit and included the sapjco.jar file in the classpath of my system. When i execute the program(Example5.java,provided with sapjco.zip) from the command prompt,it is working fin
-
I'm still running v4.0.0.00.46, and I'm seeing an issue w/ Interactive Reports. When a user clicks on the "Select columns to search" icon on the Interactive Reports bar, the dropdown appears to be hidden behind the actual report content (see screensh
-
Setting to make a PDF print as PDF???
Is there a way to attach a setting to a document that you would like it printed in landscape? I know that printers have a setup page where you can force landscape but is there a way to mark a document to print as landscape within the PDF? For exampl