My Mac Book Pro using Mountain Lion goes to sleep unwontedly.
I am running long calculations on my Mac Book Pro and it keeps going to sleep after a few minutes. I have reset the energy saver to never, but it didn't change anything. I have gone into the security panel and reset the time to 5 hours, but that doesn't work either, what do I do?
Hi Illaass,
I am using version 3. I have used the apple/settings on my mac. The headset is appearing there and it is selected there. In the Rosetta Stone select/find window nothing shows up. It is blank. But the volume bars react when I speak and sliding the fader has the expected effect of raising and lowering the input. There is just no device showing up as the selected input device in the Rosetta Stone software.
I have done everything my Mac instructions say to uninstall and reinstall the Rosetta Stone software properly.
I'm guessing the problem may be in the licensing. I installed it first on the old hard drive that crashed. Maybe that used the terms of the license and now installing it in the new hard drive violates the license somehow. So that's why it will not work properly. It allows me to open the lessons and asks me if I want to continue from where I left off. I click continue. Then it asks me if I want to register the software. I click the tab for already registered software and click continue. Then nothing happens. So again I click on the button that indicates I want to continue lessons from where I left off. The same process happens with it asking me if I want to register the software. And it will not proceed through a lesson.
Similar Messages
-
Mac Book Pro with OS X Mountain Lion will not recognize headset mic via Rosetta Stone software. What should I do?
Hi Illaass,
I am using version 3. I have used the apple/settings on my mac. The headset is appearing there and it is selected there. In the Rosetta Stone select/find window nothing shows up. It is blank. But the volume bars react when I speak and sliding the fader has the expected effect of raising and lowering the input. There is just no device showing up as the selected input device in the Rosetta Stone software.
I have done everything my Mac instructions say to uninstall and reinstall the Rosetta Stone software properly.
I'm guessing the problem may be in the licensing. I installed it first on the old hard drive that crashed. Maybe that used the terms of the license and now installing it in the new hard drive violates the license somehow. So that's why it will not work properly. It allows me to open the lessons and asks me if I want to continue from where I left off. I click continue. Then it asks me if I want to register the software. I click the tab for already registered software and click continue. Then nothing happens. So again I click on the button that indicates I want to continue lessons from where I left off. The same process happens with it asking me if I want to register the software. And it will not proceed through a lesson. -
One of the users on my Mac book pro running mountain lion finds that no changes made in last session are there next time they log on.
For instance, the Macintosh HD icon, is always moved so that it is almost off the screen to top left hand side of the desktop.
None of my changes to the sidebar in the finder are there.
My changes to the dock have reverted.
Despite unticking the box when logging out, even though i have quit all applications, iphoto and safari are always re-opened.
iphoto always says the library needs to be upgraded... even though i did that the last time.
I have tried deleting ALL the files in the "Saved application state" folder in the library folder, but that doesn't seem to make any difference.
This is on a second admin user account.
The main user account seems to be fine.
This account used to be in the filevault on Lion, but is not now in Mountain Lion.
Can anyone help?
ThanksThe same tragic thing happened to me, not even a full two days after I bought it. I immediately powered it off, wiped it as best I could, and put it in front of a fan. I tried valiantly to get the back off, but couldn't remove all the screws. I was basically inconsolable until I realized that no matter what, my credit card insurance would cover it, since it had been less than 90 days. Fast forward 48 hours, and it seemed to run just fine. Some of the keys and the track pad were sticky, and I figured since it was covered, I might as well get it fixed. My only concern at this point was had I voided the Apple Care. I brought it in, told them what happened, said what I needed to satisfy the credit card, and they said, "We'll just swap it out for you, no problem." I was thrilled, and the Genius said they appreciated my honesty, and it was easier for all parties to just do it this way. And my Apple Care was transferred to the new machine. This was my first Mac and, needless to say, I am now an Apple devotee.
-
I recently upgraded my Mac Book Pro to Mountain Lion mainly to get the notes app. Notes synced once then no more. I have notes turned on in system preferences. Any ideas? Is this a known issue?
http://fpdownload.macromedia.com/get/flashplayer/pdc/11.3.300.271/install_flash_ player_osx.dmg
-
i updated my mac book pro to mountain lion recently and my safari is not loading few web pages including apple sites please help me
I have this problem too but it seems pot luck and only like 5% of the time, the website will say the page is loaded but the page is just blank white...refreshing does not work and I have to go back and navigate to the page again
-
Hi since updating my Mac Book Pro from Mountain Lion to Maverick the computer is running slow
When you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
The OS X Mountain Lion I tried to download Wi-Fi on Mac Book Pro was not successfull. Should I buy it again? Should I check with Apple store for credit?
I successfully instaled it in iMac, but have problem with laptp. I also think I should not have bought 2 upgardes, becase if I have 2 computers, one paid upgrade is good for both computers. Am I wrong? SOmeone can advise how to proceed? I want to try again through Ethernet - cable internet - instead of Wi-Fi. Thank youYou should not have paid twice. If you logged into the App Store with the same AppleID as you used to purchase Mountain Lion the first time, you should not have been charged again.
If you internet connection is not working well enough to download it, do you have access to another network that might be faster? Perhaps and Apple Store nearby? -
Slow response on mac book pro and mountain lion
Over the past few months I have noticed that my MAC Book Pro is starting to act like a Windows machine. Freezing, slow response, Applications not responding, etc.
I have tried the typical HW reset, removing cache, added anti virus etc but if anything seems to be worse. Any suggestions?
4Gb RAM, 750G drive 170G used. Typically use Office 11 Powerpoint, Excel, Word, Outlook, Safari, Jabber, Chrome, WebEx.Two other things you can try:
PRAM reset: http://support.apple.com/kb/PH11243
SMC reset: http://support.apple.com/kb/HT3964 -
HT204032 I have a mac book pro, and mountain lion software. How can i get power nap?
h
Macs that use Power Nap
The MacBook Air (Late 2010, Mid 2011, Mid 2012) and MacBook Pro (Retina, Mid 2012) running Mountain Lion can use Power Nap.
http://support.apple.com/kb/HT5394 -
Hello,
I have been trying to install Windows 7 on my macbook pro (mid 2009, MBP53). I have successfully created a bootcamp partition using the assistant. When the computer tries to boot from the windows 7 install dvd, the screen is just black. The dvd spins for a bit, then stops and the computer is just black (no blinking cursor).
Any advice would be very appreciated.
Thanks.What kind of an install DVD are you using for Windows?
You can use any DVDs that are hardware specific. Only the full non-hardware soecific DVDs work on the Mac.
Allan -
Mac Book Pro on Mountain Lion HDD shows almost full when it is not
Hi,
I am using a MacBook Pro End 2011, with an HDD of 500 GB.
There is a partition on the HDD, and one side runs Mac, and the partition is for Windows 7 via Parallels (about 125 GB).
SInce about the last 10 days, my HDD shows only 10 GB of free space, and I think it should be having much more free space.
My data is about 105 odd GB, and the folder "Applications" shows about 7.5 GB used.
I fail to understand how the HDD can be out of space.
I tried using Disk Utility, and the option to "Repair".
While it runs and repairs some permissions, it says that some permissions cannot be replaired and that they have been modified, but the problem does not resolve.
Also , the machine feels a bit slower than before.
Help much appreciated.
Thanks, in advance.Care to share which OS you are using?
Quick fix
How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk
HD Space Checkers:Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left. -
Mac Book Pro 15" Mountain Lion 10.8 Intermittent WiFi
Hello All
I know this is a well-discussed problem already but I'll try to provide relevant details to make this post not just another rant and run-around of solutions we already know.
Before ML Reinstall (not erase and install):
- Intermittently Safari would stop loading and would say no internet connection
- My WiFi would then say, after trying to reconnect, 'connection timed-out, cannot connect to AirBears' (our school WiFi name)
- So I would try to reboot, reset SMC, reset PRAM
- Then everytime: 'no hardware installed' when I click the WiFi radar icon in the menubar
- I try to repair permissions, reboot, adjust network settings here and there according to whats floating around online (new location, MTU, DHCP, KeyChain)
- Then by some random rhythmn and combination of things it would work, for a bit
- I would get the same issues whether on school or home networks; observed for about 3-4 days
After ML Reinstall (not erase and install):
- It was fine for about two days but only because I was using WiFi from my home.
- As soon as I got on AirBears to start the week it came back after only two hours of use
- Took to school technicians, they ran hardware tests and reset the PRAM and SMC only to resurface the 'no hardware installed' thing
- They recommended I reformat my drive because its probably a tiny kink in the entire web of software(s)
- I dont wanna do that, especially since TM would just slap that kinked code right back in there
- Im at home now and its working fine
My Comments:
- AirBears (school network) seems to be a suspect
- ML reinstall seems to have suprssed the problem (at least now i dont have the problem at home)
- SMC and PRAM reset seems to induce this 'no hardware installed' problem which is resolved by rebooting
My Questions:
- How can I find out definitively if its hardware or software related? This seems to be a smart first step.kapitanemo wrote:
How can I find out definitively if its hardware or software related?
It's neither. The problem is enterprise IT. Either the router hardware they bought is junk or they have misconfigured it. I'm sure at some point they will offer to replace your Mac with a nice, plastic Lenovo. -
My 3G unlocked iPhone is not syncing mail or contacts from my mac book pro, using Lion. I am able to get a calendars and music, only. I get the message that I need to reset the password which I have done 3x's on the phone and on the Apple server.
Good to know that, but what can I do to get the mail and contacts downloaded from Icloud onto my Iphone? I am told that the password needs to be reset and I have erased and reset it 3x's already? Should I Restore All Settings or Restore Network Settings or will that result in a situation where I have to have it re-unlocked again? GRACIAS!
-
I start my mac book pro and the screen goes white with an apple in the middle
I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off againReinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Mac book pro, Turns off and goes under protection especially with an External monitor on.
Mac book pro,
Turns off and goes under protection, sometimes without any specific motivation, but most of the time when an External monitor is pluged-in.
I use it when I work with final cut pro, and this problem it's becoming huge and changing my workplans....
It can turns off also 10 times in two hours.
In many forums I read that the CPU temp could be the problem, but I've checked it and It's always around 62°-68°....
In some others they say that the new RAM could be the problem too.
Is anybody able to help me? (Underneath you can check the Panic Report and my mac informations)
Thank you so much.
Antonio
My mac Infos:
Model Name:
MacBook Pro
Model Identifier:
MacBookPro6,2
Processor Name:
Intel Core i7
Processor Speed:
2,66 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache (per core):
256 KB
L3 Cache:
4 MB
Memory:
8 GB
Processor Interconnect Speed:
4.8 GT/s
Boot ROM Version:
MBP61.0057.B09
SMC Version (system):
1.58f16
Serial Number (system):
W80223V7AGZ
Hardware UUID:
3993F249-8480-5ABD-9846-88608D085469
Sudden Motion Sensor:
State:
Enabled
The report is this one:
Interval Since Last Panic Report: 687027 sec
Panics Since Last Report: 6
Anonymous UUID: EB3EFFB2-AFCE-472E-ADA1-F35EFF3C7BBA
Sat Oct 13 16:58:00 2012
panic(cpu 2 caller 0xa3dc9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa822c000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x7c6f3888 : 0x21b837 (0x5dd7fc 0x7c6f38bc 0x223ce1 0x0)
0x7c6f38d8 : 0xa3dc9b (0xc5328c 0xcc3800 0xc61e60 0x0)
0x7c6f3978 : 0xb58608 (0xe50bc04 0xe80b004 0x100 0x0)
0x7c6f39c8 : 0xb4f601 (0xe80b004 0x100 0x7c6f39f8 0xa2d778)
0x7c6f39f8 : 0x175b9a6 (0xe80b004 0x100 0x438004ee 0x2b1f6a)
0x7c6f3b38 : 0xb772b5 (0xe80b004 0xe80c004 0x0 0x0)
0x7c6f3b78 : 0xa46e7c (0xe80b004 0xe80c004 0x0 0x0)
0x7c6f3c18 : 0xa4355b (0x0 0x9 0x0 0x0)
0x7c6f3dc8 : 0xa4542a (0x0 0x600d600d 0x702a 0x7c6f3df8)
0x7c6f3e98 : 0x9d9582 (0xc1d00011 0xaa910001 0x20802040 0x7c6f3ee0)
0x7c6f3ef8 : 0xd9b57d (0xe08fc00 0x7c6f3f4c 0x0 0x7)
0x7c6f3f58 : 0xd9b71a (0xe076800 0xda2e54 0x7c6f3f78 0x2a45c9)
0x7c6f3f78 : 0x230235 (0xe076800 0x0 0x0 0x6c03)
0x7c6f3fc8 : 0x2a179c (0x863ea0 0x0 0x10 0xe980a84)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AGPM(100.12.31)@0xd98000->0xda2fff
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x9a8000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x9ca000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x991000
com.apple.nvidia.nv50hal(6.4.0)@0x1625000->0x1a39fff
dependency: com.apple.NVDAResman(6.4.0)@0x9d7000
com.apple.NVDAResman(6.4.0)@0x9d7000->0xcc4fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x991000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x9ca000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x9a8000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 563676343615
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0x1495000, size 0x65536) - last unloaded 209721117821
loaded kexts:
foo.tun 1.0
foo.tap 1.0
com.parallels.kext.prl_vnic 6.0 11828.615184
com.parallels.kext.prl_netbridge 6.0 11828.615184
com.parallels.kext.prl_usb_connect 6.0 11828.615184
com.parallels.kext.prl_hid_hook 6.0 11828.615184
com.logmein.hamachi 1.0
com.parallels.kext.prl_hypervisor 6.0 11828.615184
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.Apogee.driver.DuetFWOverideDriver 1.4.4
com.digidesign.iokit.DigiDal 9.0f4
com.AmbrosiaSW.AudioSupport 3.2
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 44524746255
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 366
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleLPC 1.5.1
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.GeForce 6.4.0
com.apple.driver.AppleIntelHDGraphics 6.4.0
com.apple.driver.AppleIntelHDGraphicsFB 6.4.0
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleFWAudio 2.6.2fc2
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 365
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41.4
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.iokit.IOFireWireAVC 4.0.6
com.apple.nvidia.nv50hal 6.4.0
com.apple.NVDAResman 6.4.0
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B09, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 465,76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: iPhone, 0x05ac (Apple Inc.), 0x12a0, 0xfa140000 / 6
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 9
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3
FireWire Device: Duet, Apogee Electronics, Up to 400 Mb/secNever mind, I found it.
Maybe you are looking for
-
Setting the source-interface in a tcl script for email.
So once again I am trying to figure this out and failing miserably. The only thin I can think of at the moment is that I need to tell it to source from a specific vrf interface. I've tried looking through possible enviornment variables. Hoping I coul
-
Hello I have just received the free upgrade to fiber optic. An engineer came to set up the new socket. I didn't have the black router as I had to go to collect it from the post office but he kept on saying I just needed to plug one cable, very easy.
-
BI Load issue in the transformation/DTP after SP 17
Hello, After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP. See below the errors: u2022 Messages for 101 data records saved; request is red acc. to configuration u2022 Thee is no active nametab in the s
-
LessFilter and ReflectionExtractor API giving incorrect results
I am using Oracle Coherence version 3.7. We are storing DTO objects in cache having "modificationTime" property/instance variable of "java.util.date" type. In order to fetch data from cache passing "java.util.date" variable as input for comparison, L
-
Discoverer 11g and Oracle apps
I have setup discoverer and everything is working. When calling from oracle apps, I am getting this error: Could not locate or parse the .dbc file /ebs02/prod/discoverer/Oracle/Middleware/asinst_2/config/Discoverer/Discoverer_asinst_2//corpdevpl200-