My mac book pro will not update
I have had 3 updates on my Software Update menu for quite some time now. It tells me to install them and restart my computer. I have tried multiple times to do so and they continue to stay on the need to install list. Can anyone help me please...
The list of Installs that won't install are:
APPLE SOFTWARE INSTALLER UPDATE VERSION 1.0
SAFARI VERSION 5.1.10
SECURITY UPDATE 2013-004 VERSION 1.0
How large is your hard drive and how much hard drive space do you have left?
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
Try Software Update again.
Similar Messages
-
I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,
Try starting in safe mode:
Ciao. -
I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).
-
My Mac Book Pro will not power on
My Mac Book Pro will not (boot-up) power on.
What should I do?Do you have the power adapter connected? Does it display a light, amber or green?
Have you checked the battery charge level by pressing the exterior battery level button?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop
You could try doing a hard shut down (holding the power button or yanking the battery) and then doing a safe boot by holding the shift key at startup:
http://support.apple.com/kb/HT1455
Also, not sure if this applies in your case, but I've had that happen when there's a USB drive inserted either in the computer or a connected external keyboard. I did a hard shut down, removed the drive and it went through a normal start up. -
17 inch MAC book pro will not boot up
My 17 inch MAC Book Pro will not power/boot up. The battery is charged and it displays a green light on the power adapter. However, it will not boot up.
Reset the SMC > http://support.apple.com/kb/HT3964
If it doesn't work, probably there's a logic board problem, so it's possible that you need a new logic board. Take your computer to an Apple Store or reseller -
MY new Mac book pro will not save any of teh bookmarks I make in safari. If I make a bookmark, it will not appear until I close safari and reopen it. Then, if I shut my computer down and reopen safari, all of the bookmarks are gone. This has happend multiple times and I don't know what is going on. I would really like to use my bookmarks.
Delete the
com.apple.safari.plist
reboot and start Safari, reset your preferences, instructions are here
Deleting the System Preference or other .plist file -
Mac book pro will not sleep after i installed mavericks
mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off
mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off
-
MAc book pro. I have downloaded and installed os x yosemite now mac book pro will not start? How long should it take? Is there something wrong?
The 2 computers here took about 45 minutes to an hour each.
The best thing to do is give it more time. If it gets too ridiculous, shutdown using the power button and then restart. Check menu/About This Mac to see if it is installed. -
My Mac Book Pro will not start up. I ran the AHT and received the following error: 4SNS/1/40000000:Th0H-90.750. Anyone know what this means?
I have no idea how much it will cost to repair. I don't even know what the exact problem will prove to be. It may be quick if it isn't a motherboard problem. I just don't know. Take it in for a service diagnostic, then they can tell you what is involved.
-
My mac book pro will not start, i hear the fan sometimes but nothing else
my mac book pro will not start, i hear the fan sometimes but nothing else
What is the exact model of your Macbook Pro?
-
Mac Book Pro will not start on Battery Power
Mac Book Pro will not start on Battery Power although battery at 98% need to connect charger. When started date and time incorrect, comes up as 1st Jan 2012.
What is the exact model of your MBP? The date change often is an indication of power loss to the MBP, such as disconnecting the battery.
If the SMC reset does not solve the situation, post this from your MBP:
Make certain that the power adapter is connected.
Ciao. -
My mac book pro will not recognize
My mac book pro will not recognize my hp printer after years of knowing it's connected. USB port works fine with other connections. I have reinstaled it. What do I do?
Hi ...
Go to the HP site and download the drivers (software) that is specific to your HP printer model > http://www8.hp.com/us/en/support-drivers.html
That way you will have the latest software available for your printer.
Then open System Preferences > Print & Scan - Print.
Select the printer on the left then click - (minus)
Now click + and follow the instructions. You may need to turn the printer off then back on before your Mac recogizes the new drivers.
You may also need to click the lock icon in the Print window in order to make changes. You may be prompted for your admin password.
edited by: cs -
My mac book pro will not shot down or restart.
mac book pro 13 2011 dec. mac os x 10.7.4. my mac book pro will not shot down or restart, my mac is to slow to much loading. . when i open some apps loading when i will restart my mac book pro
loading. i can't restart the same problem when i wil shut down my mac. need helpMackeeper has been known to cause more problems than fix, all the posts here say don't use it and offer instuctions on how to remove it, which is not as easy as just dragging it to the trash.
I am willing to guess that some of the third party software could be the issue.
Try a safe boot:
http://support.apple.com/kb/HT1564
Starting up in “safe mode” may help you diagnose problems you’re having with your Mac.
Note: To print these instructions, open the Help Viewer’s Action pop-up menu (looks like a gear) and choose Print.
Shut down your Mac and wait 10 seconds.
Press the power button.
Immediately after you hear the startup tone, hold down the Shift key.You should press the Shift key as soon as possible after you hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator (spinning gear).
To leave safe mode, restart the computer normally without holding down any keys during startup.
If you still have problems I would take it to Apple, there seems to be something strange going on here.
You search remove mackeeper on this forum, and get rid of it. -
Mac book pro will not open past spinning wheel
Mc book pro will not open past spinning wheel
Which model MacBook Pro do you have and which version of OS X are you running?
Please see -> Help us to help you on these forums.
Call back...
Clinton
Maybe you are looking for
-
Is there a way to check to see if an IMEI has been submitted for unlock?
I wanted to ask is there is any way to check IMEI numbers to see whether or not they have been submitted to Apple for an unlock?? I have two phones I need to check, and iPhone 4 which is my daughters and was a birthday present, and an iPhone 5 which
-
Hie friends , Is there any method for displaying the logo in the alv output screen[ in the free space at the right corner of the screen] by the oops concept[i.e by using cl_gui_** classes]. Here is my simple program by using cl_gui class
-
ITunes backing up my iPad.
My iTunes account was deleted so i can't back up my iPad to anything because other wise I have to reset it. I have a mac with iTunes so I how can I now back up my iPad without restoring it?
-
Oracle Performance problem in Tru64 Unix
Hello All, I am having performance problem in Tru6u Unix. Details are mentioned below : OS: Tru64 Unix Oracle Version : 8.1.7.4.0 Forms : 6.0 Mode: Oracle Parallel Server When, developers are trying to save some data using forms, it's taking too much
-
Value Limitation on Hyperion Planning Supporting Detail
Hi All, Is there a way how to set the limitation on Supporting Detail ? I try to input the 9.500.000.000 as the value in my Supporting Detail but it always changes to 9.223.372.036.854776, it's like the total in the Supporting Detail can't be more th