My Mac Book pro won't read my blank cd

My mac book won't read the cd I put in. it has been since I've had it but all of a sudden it's stopped

Subject:   Blank CD/DVD Not Recognized by Mac OSX
Problem:  Inserting a blank CD/DVD does not automatically launch the preferred application.  The report indicates "unrecognized format"
Solution:  Deleted the WDNotifier.app from the "Macintosh HD - Library - Startupitems" folder, then re-start Mac OSX.
Analysis:  WD Notifier is capturing the blank CD/DVD status and blocking it from being reported to Mac OSX.  This appears to be a Western Digital bug in their app.
Discover of this Bug:  Garry Anderson.

Similar Messages

  • My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    Please describe in detail all you have attempted to do in order to resolve the issue.  Contacted Canon's tech support for instance?

  • Ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

    ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • My mac book pro won't turn on, My mac book pro won't turn on

    My mac book pro won't turn on, My mac book pro won't turn on

    Go step by step and test.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • HT201177 My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on besides the cursor. what should I do? Thanks.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

  • My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off

    My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off. It's been like this all day but I didn't notice till I turned it on.

    It's either a power adapter issue (not likely) or (more likely) a power supply problem on your MBP. Take the machine into your local Apple Store or an AASP and have them diagnose the problem.
    Good luck,
    Clinton

  • My Mac book pro won't turn on at all and when i put it to charge the light blinks, what should I do?

    My Mac book pro won't turn on at all and when i put it to charge the light blinks, what should I do?

    Yes if your model MBP has a removable battery.  If it does not: 
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    http://support.apple.com/kb/HT3964

  • My Mac book pro won't start! It boots as far as the sign in screen and then everything goes black. Please help.

    My Mac book pro won't start! It boots as far as the sign in screen and then everything goes black. Please help.

    Which model MacBook Pro do you have (e.g., “15-inch Late 2011”) and which version of OS X are you running?
    Clinton

  • Mac book pro won't go pass apple icon screen

    My Mac book pro won't go pass the start up screen. It displays the gray apple and the spinning grey circle. HELP!

    10.7 Lion / 10.8 Mountain Lion
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    Reinstall OS X
    http://support.apple.com/kb/PH10763?viewlocale=en_US
    Additional Steps
    http://support.apple.com/kb/PH10929

  • Mac Book Pro won't see my iTunes Library on an external drive

    I have a brand new Mac Book Pro and my iTunes Library is on an external drive.  My computer won't see this Library even if I change the location under Preferences.  All I can see are my purchases from the iTunes Store on my iCloud.  I don't want to clutter up my MBP with my iTunes Library so what should I do?
    I'm running Yosemite and latest iTunes
    Thanks for any help
    Les

    Really a library, or just media?  A library is a complete collection of files an folders including the critical iTunes Library.itl file, generally all enclosed in an "iTunes" folder.  You do not direct iTunes to open a library with preferences, you do it by holding down the option/alt key while starting iTunes and guiding it to the .itl file you wish it to use.

  • My mac book pro won't work. it starts up and then turns off

    My mac book pro starts up & then turns off. I know the memory was almost full so I bought an external storage and was going to start removing pictures to make more room, but now it won't let me work on it. it just turns right off. It's not the battery. has anyone had this problem? thanks

    Hello Marcela100
    Check out the article below for troubleshooting startup issues on your Mac.
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/ts1417
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Brand new out of the box Mac book pro won't go past register country screen. esc starts voice over, cannot click or enter to go to next set up screen. Help!

    I have a new Mac book pro, powered up, won't go past welcome, choose country screen. VoiceOver works, I can use arrow keys to toggle up and down country list, but the continue button arrow will not work. Pressing enter makes an error tone. Tried everything to select country and proceed through setup, no luck. Supposed to be first Mac, present for my wife. So far not impressed!

    I just purchased my first Mac last night and also had the same problem.  You have to press down on the track pad to hear it click.  After you get it all setup you can set the track pad up for "touch" clicking.  Hope this helps.

  • Mac book pro won't install or uninstall programs

    I have a mac book pro, running OSX 10.7.5.  When I try to instill Java, or any program for that matter,  it takes me to the download screen, asks me for my password and then does nothing.  Will not install.  I tried to uninstall a program as well and the same thing happens.  Won't install or uninstall.  Any ideas?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Mac book pro won't turn on after after accidentally shutting it down during updating

    Please help, I was updating my Mac book pro and accidentally shut it off.  Now it wont turn on, it shows the apple logo and the continuous cycle circle. 

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to a pre-2013 Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • My mac book pro won't load any safari page or connect to the App Store, but it does load new emails.....

    My mac book pro isn't loading any safari page, the  blue loading bar starts to move then freezes....
    Also if I try to access the App Store it won't load then says unable to connect to App Store
    There is an Internet connection as it receives new emails

    And now after logging in I get a white screen.....omg what's wrong with it?!

Maybe you are looking for

  • Text Selection Hangs Since iOS 5.1.1 Update

    I have an iPhone 4 32GB on the AT&T network. Updated it to iOS 5.1.1 about two weeks ago. Since the update multiple applications (Apple and 3rd Party) have been showing this behavior: 1) Click in a text entry or text area form field, 2) Begin typing

  • Trying to convert a date in text format to date or numeric

    I've been given an excel file of members of a group, which includes listing of members' birthdays.  These are in the format "26-Jul" in text characters.  In order to sort by date for a birthday listing, I'm stuck trying to set up a calculation that w

  • Reset Actiontec FIOS router: now WPA2 key requires number (and not just letters)----Workaround?

    Read only the items in bold for the quick version.  I'm not shouting. This probably applies to all high speed internet WiFi routers with the Verizon software loaded. When I first had FIOS set up last year, I was able to have my "standard" (very long)

  • Random tick noise on left hand side

    Hello, I have a MacBook Pro that was purchased a bit earlier than the latest models today. I seem to have a random -low but audible- and consistent ticking noise on the left side of the laptop that: 1- Seems to show varying degrees of loudness if the

  • Installing SMC 3.5.1a on Solaris 10

    After "successfully" installing SMC via es-guiinst the process fails when attempting to use es-setup/es-guisetup. I get a message saying setup unsuccessful and pointing to a log (/var/opt/SUNWsymon/install/gui_setup_spinel.x) containg the following i