My mac book safari always not responding when i klic on sidebar

my safri always not responding when i klic on sidebar pleas help me to solve this problam

Jasmin325<
Also please include your model, year, which OSX you are using, this will help anyone reading this to offer advice.
https://discussions.apple.com/docs/DOC-5431
A couple of shots in the dark here.
Try this, start in safe mode and see if it will go. Power it off, power it on holding the shift key, continue to hold the key till you see a progress BAR, then release and see if it will finish booting. If it does login see if thigs work, then log out and try booting normally. (NOTE that this takes considerably longer,be patient)
Another thing you can try is powering it up holding the OPTION key and see if the start up manager brings your HD up on the screen, if it does click on that and see.

Similar Messages

  • Recently my track pad (in my Mac Book Pro) does not respond to 'clicking' commands.

    Recently my track pad (in my Mac Book Pro) does not respond to 'clicking' commands.  It does just fine with a USB cable mouse.  What do I do?

    Are you tapping to click or physically clicking? If you're clicking, does the trackpad button go down all the way?

  • Safari Is Not Responding When I View other Programs

    When I have Safari open, and move the mouse to the upper left corner of the screen to view other programs - when I try to return to Safari it does not respond.  Instead it sits in the background and will not come up or let me close it.  It happened for the first time last night, and again this morning.
    Any advice?
    Thanks!

    Shouldn't have!  I'd be surprised if it did - but it wouldn't be the first time I'd been surprised by a computer!!!

  • Firmware update causes mac book pro to not respond

    Hi all. I was hoping someone could help me out please? I just ran the latest firmware update for my 2011 mac book pro and after it installed it now won't start up, only getting to the gray screen before freezing there.
    I've tried all the on line solutions I can find on Apple's site, but no luck. Can anyone please tell me how I can fix this??
    Thanks heaps.

    See gray screen
    https://support.apple.com/kb/TS2570
    Hold the shift key down upon boot, this will perform checks and disable any third party kext files installed into OSX and called a Safe Boot.
    (Kext files can also be installed by software itself and if you have it auto-launcing at log-in that could cause a freeze.)
    Once in, copy your personal data off the machine to a external storage drive (in addition to TimeMachine if your using it) and disconnect.
    Go around and update all your third party software, or remove some that don't have a update and do have kext files in the System/Library/Extensions folder (use the devleopers uninstaller preferred)
    If that fails then hold c boot off the 10.6 disk (or command r boot into 10.7 recovery) and simply reinstall OS X, this will replace OS X only with a fresh copy, then software update.
    If that fails, then you likely have a failed firmware install, you can install it manually
    https://support.apple.com/kb/HT2213
    https://support.apple.com/kb/HT1237
    If that fails, you'll have to take your machine in for service and get the logicboard replaced.
    If OS X boots, but you can't log in or have a problem after logging in, it's likely a third party program or user account issue, create another user account and test again when your problem occurs. If you can't log in, there is a trick to create a new admin account at the command s boot.

  • Why is my mac book blank and not loading when I turn it on?

    Why is my mac a blank screen when I turn it on and not loading?

    Jasmin325<
    Also please include your model, year, which OSX you are using, this will help anyone reading this to offer advice.
    https://discussions.apple.com/docs/DOC-5431
    A couple of shots in the dark here.
    Try this, start in safe mode and see if it will go. Power it off, power it on holding the shift key, continue to hold the key till you see a progress BAR, then release and see if it will finish booting. If it does login see if thigs work, then log out and try booting normally. (NOTE that this takes considerably longer,be patient)
    Another thing you can try is powering it up holding the OPTION key and see if the start up manager brings your HD up on the screen, if it does click on that and see.

  • Flash cs3, cs4 and cs5 always not responding in windows7

    I have installed adobe flash cs3, cs4 and cs5 in windows 7, but it is always not responding when I run them. While they are running normally when running on my WindowsXP. I had to reinstall them several times, the result remains the same. Is there any problem in my windows 7 ? can someone help me? thanx.

    Problem is not in your windows 7 OS, since i was working CS4 and now i m working with CS5 in windows 7 only. And i feel more comfort with this new OS. May be you hardware configuration might not be support to new technology like windows 7 and Flash CS5. Beca it is need high hardward configuration

  • I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

    I have OS 10.8.2 and use wireless at home just fine.
    When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
    I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
    What do I need to do connect via a cable modem?

    You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

  • I am on Software  Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?

    I am on Software  Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  2 GB 667 MHz DDR2 SDRAM
    Graphics  NVIDIA GeForce 8600M GT 256 MB  

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???

    Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???

    Safari Problems
    Safari - Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    Try setting up another admin user account to see if the same problem continues. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • My new mac book pro will not save any bookmarks I make in safari. Why is it doing this? I would really like to use my bookmarks.

    MY new Mac book pro will not save any of teh bookmarks I make in safari. If I make a bookmark, it will not appear until I close safari and reopen it. Then, if I shut my computer down and reopen safari, all of the bookmarks are gone. This has happend multiple times and I don't know what is going on. I would really like to use my bookmarks.

    Delete the
    com.apple.safari.plist
    reboot and start Safari, reset your preferences, instructions are here
    Deleting the System Preference or other .plist file

  • I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?

    I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?
    many thanks Carl.

    You must boot from another drive in order to erase the system drive.
    Try starting up with Snow Leopard DVD inserted and C depress. That should get you booted from the DVD. Then start Disk Utitlity from DVD and erase the disk then you should be able to install Snow Leopard.
    Remember that everything will be removed from the disk when you erase it and install Snow Leopard so backup first.
    Allan

  • I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

    I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

    Maybe some help here:
    http://support.apple.com/kb/TS1367
    http://support.apple.com/kb/TS1365

  • My mac book pro is not "starting" it makes beeping noise when i turn it on, prior to this for half  day it was turning off after an houror so.

    my mac book pro is not "starting" it makes beeping noise when i turn it on, prior to this for half a day it was turning off after an hourr so.

    It may very well be a RAM issue but possibly something else.  Look over this extensive troubleshooting document for a possible solution:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • I have a mac book pro. 4yrs old. when I'm starting it, its not booting up.. no sound.. no display. just the blinker is coming on. plz help.. :(

    I have a mac book pro. 4yrs old. when I'm starting it, its not booting up.. no sound.. no display. just the blinker is coming on. plz help..

    Ok..
    Try Resetting your Mac's PRAM and NVRAM
    If that doesn't help, try Resetting the System Management Controller (SMC)
    If nothing helped, since you don't hear the startup chord, make an appointment at an Apple Apple Genius Bar or take your Mac to an Apple certified repair provider.
    v10.5.6 is an oudated version of Leopard.

  • Iphoto not responding when importing pics

    i just bought a macbookpro so i've been trying getting all the pictures From my PC into the Iphoto however, i couldn't do so as my iphoto always not respond after i click importing the photos from the harddisk and leave no other choice for me apart from force quit. Is there anyway that will help me to solve this problem?
    PS the files are pretty big, about 10 GB

    juanveron:
    Welcome to the Apple Discussions. If you're trying to import directly from your PC to iPhoto I suggest you copy them to your Desktop first and then import, folder by folder as Terence suggested. PC's handle the resource fork, i.e. thumbnail, differently than Macs and it would be safer to get them on your Mac first.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for