My mac completely froze after closing safari

my mac [almost 2 years old] froze out of no were when I shut safari using CMD+Q to quit it I've being using that shout cut ever since I bought it and it completely froze I couldn't use the keybord or my trackpad ethier and funny thing no spinning wheel of death [that litte spinning wheel thing] as i call it when I shut the lid the glowing apple didn't go of like it usaly dose I pressed the power button mutiple times i gave it to my dad, he managed to shut it down then start it up, log out, then shut it down again. and now its working fine

Kernal Panic. Some information.
Kernel Panic Log

Similar Messages

  • Reopen Safari tabs after closing Safari and restart?

    Is there a way to reopen all the tabs from my last safari session after a restart?  I closed safari, then restarted, and the option to reopen last closed window and reopen last closed window are greyed out.  I did not check the reopen tabs (or windows?) check box upon restarting.

    This will work if you have Glims installed. It's free and works on v10.9.2 and Safari 7.
    Download and installed Glims > Glims for Safari | www.MacHangout.com
    Once Glims is installed, go to your Safari menu bar click Safari > Preferences then select the Glims tab.
    Select General on the left then switch Restore Tabs at Launch ON.
    Glims is free.

  • Screen froze when closing Safari then went black. Am I in trouble?

    Have had this iMac since 2004, NEVER had any problems. Went to close window from Safari, screen froze, wouldn't turn off. Had to unplug, when I turned it back on the screen reloaded with the Apple icon then went black. Am I looking at a dead machine?

    1) You should run disk utility from your install dvd.
          a) fix the disk
          b) update your permissions.
    2) Try a safe boot.
         Shutdown your machine.  Hold down the shift key.  Poweron.  Wait awhile; wait awhile while you harddrive
         is being checked.
         http://support.apple.com/kb/ht1455
    3) Another way to correct filesystem problems is into single use mode.
         This page will tell you how to get into single user mode.
         http://support.apple.com/kb/HT1492
        Basically, you hold down the command + s key then  powering on your machine. The command key
        has a little apple symbol on the lower left. It is between the alt/option key and the space bar. 
    4) Run hardware diagnostics.  It's good for a sanity check.

  • Gmail missing from top sites after closing Safari

    This is becoming extremely frustrating. I constantly add Gmail to my top sites and pin it so it permanently remains there; however, once closing out of Safari it disappears. Anyone else having trouble with keep Gmail on their top sites?

    I get the same thing...if I restart my computer or even quit and relaunch Safari, all my web-mail top sites are gone, replaced with the typical ever changing top sites. It only seems to do it with these types of sites, as all my other ones set to remain permanent always do.

  • Saving tabs? reopen after closing safari...

    Is there some addon that I could use to save my open tabs over sessions? With OmniWeb and Safari w/ Saft it's possible to close the app and have all tabs reappear the next time the browser is opened. (Also handy for crashes; Saft has a crash protection which asks to bring up all lost tabs after a crash.)
    And yes, I know I can bookmark tabs, but that would generate a new entry everytime I close the browser...

    Why can't you just use Saft? File --> Save browser window.

  • Mac book froze after updating iphone

    Please advise on how I can reboot or quit the macbook since its frozen while i was updating the software of my iphone5

    Here is a few things that you can try.
    1. Try booting to safe mode by holding the shift key while starting up.
    2. Reset the SMC
    3. Reset the PRAM
    Hope this helps!

  • My iPad ran out of battery completely.  After charging all night, it is 100%, but my apps won't start.  I can access email, Safari, etc.....just not game apps.  I have restarted it several times.  Thanks!

    My iPad ran out of battery completely.  After charging all night, it is 100% however I cannot get my apps to work.  I can access Safari, email, etc., but cannot get game apps, etc.  I have restarted it a couple of times.  Any help?  Thanks!

    Try downloading any free app from thee store and then re-try your apps - the free app can then be deleted.
    If that doesn't work then try closing all your open/recently used apps completely : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • After i updated to 10.7.5 my mac keeps freezing when using Safari

    After i updated to 10.7.5 my mac keeps freezing when using Safari, I've to restart it everytime. What's the problem with 10.7.5? Is this a known problem? How can I fix it?

    Go Here  >  http://support.apple.com/kb/DL1582 and download and Install the Combo Update.
    It is Safe to install over existing.
    After the Successul Install be sure to Restart your computer.

  • Safari and other apps keep kicking me off. Even after closing all inactive apps? Any deals why?, Safari and other apps keep kicking me off. Even after closing all inactive apps? Any deals why?

    I've double clicked the home button and closed all other apps other than the one I'm using. That doesn't seem to help. Is there something else I can do?

    When you close all of apps in the recents tray, it might help if you restart the iPad or maybe even reboot it like this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    For Safari specifically, this might help as well. I would recommend restarting the iPad after clearing Safari.
    Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I just did an update to 6.0 on Lion. Now when I re-open Safari after closing it by clicking the red button  it re-opens to my home page, not all my previous tabs..  prior to the update it would re-open with all my previous tabs, which is what I want.

    I just did an update to Lion  10.7.4 with Safari  6.0. Now when I re-open Safari after closing it by clicking the red button,  it re-opens to just my home page, not to all my previous tabs as it did before the update.  I prefer having my old tabs re-open.  How can I fix this?

    I've had what I think is the same problem since the most recent software update.  I have Lion 10.7.4 and have updated to Safari 6.0.  The most noticeable difference is that where previously I had two boxes at the top of the Safari window (one to enter URL addresses, one for Google searches), there is now only one box for both functions.  I don't like that as well, but I can live with it.  However, since the most recent software update my "back button" only works about 5% of the time. Most of the time it is grayed out.  So I usually can't get back to previous pages using the back button.  Also, when I've clicked a link that opens a new window (for instance, going through the return process at Amazon, I clicked UPS locator and it opened a new window), where in the past I would have just clicked the red button after I had the information, the UPS locator window would have closed, and I would have been back at Amazon - now if I close the UPS locator window, all Safari windows close.  The Safari application doesn't close, but the Amazon window closes, I'm back to an empty screen, and I have to open a new Safari window and reenter everything.  I'm using a work-around of clicking on History and selecting the description of the window I want to get back too, but that only works part of the time. In the Amazon example, that's what I did once I had the UPS info, but even though I clicked the correct window description, it took me back to the beginning of the return process & I had to reenter all the info.  Of course, that info was easy to reenter, but if I'm in the middle of a complicated process, it's a big problem.  I've filed a bug report; I surely hope the Apple engineers are able to fix this.  I'm used to using the back button function a lot!

  • How to make a sound play after I complete a download in safari

    I am just wondering if there is a way to make a sound go off after I successfully complete a download in safari 5.0.5.
    If anyone can help, I appreciate it!

    I do not think there is one actually.  You could always look through the Safari Extention Gallary (https://extensions.apple.com/) and see if there is a 3rd party one you could use.

  • My iMac screen keeps showing pixels of previously opened documents and Safari tabs and hour or two after closing them. The shadow of those opened documents are still there hours later after shutting down and restarting my computer. What is happening

    My iMac screen keeps showing pixels of previously opened documents and Safari tabs and hour or two after closing them.
    Even when I swipe to the dashboard the outlines are still there when I know they should not be.
    The shadow of those opened documents are still there hours later after shutting down and restarting my computer.
    What is happening and what shall I do? Thanks in advance.

    Not much to go on in your product info, but maybe this will help: iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program. If not, then it's time to visit an Apple repair station.
    27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

  • I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

    I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • I have installed windows 7 into mac 10.6 after complete it restart and from than its display is blank and nthing can happen it takes more than 3 hr so now what should i do?

    i have installed windows 7 into mac 10.6 after complete it restart and from than its display is blank and nthing can happen it takes more than 3 hr so now what should i do?

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Mac Acting Erratically: Please help Safari iTunes Messing Up

    Okay I have an Apple PowerBook G4 running Mac OS 10.3.9 Panther (purchased late Nov 2003 was originally running 10.2.8 Jaguar) and up till a few days ago everything was running smoothly. That is until after I upgraded to QuickTime 7.1.2 and installed iTunes 6.0.5 when the problem started. Somehow my login.keychain for Safari got corrupted and I tried deleting original and making a new one.
    Here's what has happened since then:
    Any free media I have downloaded like videos or music off free sites (without Digital Rights Management) already still work. However, if I try downloading new stuff the new files don't work.
    Since day before yesterday 4 times when I open iTunes it tells me my Library has been damaged. All my music files are still on my hard drive and are still playable but my iTunes Library file is corrupted -- how and why I don't know.
    No music appears in my Library nor do any of my videos in .m4v format (iPod format) show up in my Library since then. I trash damaged file and re-import or select add to library and re-add all the media to my Library seems to work fine. I play them and most of them are playable. Even when Library works a few that played earlier have a skipping problem.
    In Safari all my bookmarks got deleted -- I had to back, find the websites and re-add them -- fortunately when I closed Safari and re-launched the browser they remained saved the next time I closed and re-started the browser. However, third time (normally when something doesn't work twice they say third time's the charm) well the third time I opened Safari everything got deleted again.
    My iTunes Library is acting erratically -- files I download don't work although files I already have are still playable usually except when my programs run across errors that didn't exist earlier.
    I have Microsoft Office X 10.1.6 with the PowerPoint X and Excel X Security Updates, the Apple Security Updates 2006-002, 2006-003 and QuickTime 7.1.2 and iTunes 6.0.5.
    When I originally downloaded and installed Security Update 2006-001 my Safari completely broke and would stop running and my Dock Menu dissappeared until restart but even then Safari stopped working. Could find no other solution than reinstalling OS X to return my Mac to pre Security Update 2006-001 levels. Not even Disk Utility solved the problem.
    iTunes 6.0.2 also caused problems for me (I heard it caused problems on Windows also) the problem on my Mac was Disk Utility stopped working altogether. Fortunately, by deleting the game Chess from my Mac it fixed the problem. Today, I have Chess back on my computer because since my last OS reinstall I just updated my iTunes to 6.0.3 (I think) I now have iTunes 6.0.5 and have had no problems with Chess and iTunes or iTunes and another application like Chess preventing Disk Utility from working -- but now this problem I am describing where my Library erases itself regularly -- sometimes I restart iTunes and the new user wizard shows up and asks if I want iTunes to find my media and automatically add it to my Library when it does I say yes and it re-adds everything but somehow I have 2 files for every song on my computer and it re-imports (or imports) all my music, videos and podcasts back into my Library once and then re-imporitng it again
    This time Safari is working but bookmarks are being erased and re-erased, iTunes is acting all screwy, files I download don't work when they should, I tried deleting and re-downloading a video I had saved on my hard drive (that I downloaded earlier) and the exact same file (no changes had been made to the file when it was re-uploaded) had errors playing when the download completed.
    Fortunately, I had burned the video to a CD so I can re-copy it to my Mac and when I play it off the CD on my Mac or copy directly to Mac and play it works just fine.
    Since downloading these updates cannot download anything anymore without errors when playing them.
    If I downloaded same files earlier though they would have worked.
    Only as a last resort would I do a clean reinstall of OS X -- thing is it would take a lot of work just to reinstall OS X, copy all my files I have backed up back to my hard drive, re-importing my music and artwork, re-installing Microsoft Office X and its updates, reinstalling some (but not all the latest ones if neccessary) of Apple's Security Updates, reupdating to Mac OS 10.3.9 to reinstall QuickTime 7.
    I had like 283 files in my iTunes Library, including all my music, videos, podcasts etc.
    Imagine how long it would take to get them all back in there; and I re-did it last night until it got erased again. Don't want to re-do it unless next time it stays permanently.
    Just a note I also have Virex 7 on my Mac -- and it used to be a startup item but somehow it got disabled from starting up.
    Also, I do have VLC Media Player but even that has been having problems with playing newly downloaded media files since I updated my QuickTime.
    So the problem now is with my iTunes Library erasing itself continuously and even when its working sometimes refusing to play an entire track (it starts playing a song and then skips to the next one) I've checked my preferences and cross shading or whatever its called is unselected but sound checker is on.
    Also the problem involves my Safari erasing bookmarks on its own as described above. Please help anyway you can!
    As a last resort will do a clean reinstall, re-copy all my files back to my hard drive, reinstall my programs, re-update my Mac carefully etc.

    Thanks for the help. I will take your advice and try running Disk Utility again. I have noticed sometimes when running Safari after quitting the application my defaults get changed -- that is my preferences go away. I have popup blocking and tabbed browing normally enabled by default it used to be if I enabled them as long as I didn't manually disable them that they would stay the same even after I quit and relaunch the browser, but now they get disabled when I quit and have to manually re-enable them again.
    Also as noted bookmarks get deleted. Since the time I posted this thread I had at one time done a clean reinstall of OS X -- did it about 1-2 weeks ago. Not sure if videos I download on my Mac still have same problem but noticed if I download same videos on a PC that I used to download and play directly on my Mac that I could burn them to a CD or put them on a flash drive and transfer the file to Mac without any problems but downloading directly on Mac and then playing causes difficulty.
    However, the same issue with Safari and iTunes has still been lingering for a while. I already have Mac OS 10.3.9 Combined Update installed should I try re-installing again? That would require me to reinstall OS X again and then update to 10.3.9. Or simply re-download and re-install 10.3.9 if possible over existing configuration so installing 10.3.9 over 10.3.9?
    3 times out of 5 iTunes Music Library becomes damaged -- a few times I have tried since then deleting files in iTunes cache -- shouldn't become too big anyways -- otherwise it could become slow or something (good reason for cleaning Safari cache sometimes also) of course I wouldn't clean out the entire cache unless I had to or I thought that would fix the problem etc -- unless maybe it would even do a lot of good for resolving the problem.
    I even tried trashing the damaged iTunes Library and the iTunes Music Library.xml file when the Library wasn't working.
    If the problem re-occurs should I trash the iTunes preferences file(s) like iTunes.plist etc would help?

Maybe you are looking for

  • How to cancel an outgoing message

    I decided to email a video to my sister from my iphone 3g, that was 2 days ago. It is still trying to send it and I don't know how to cancel it. Does anyone know how. Now my phone keeps beeping and vibrating and coming on all by itself.

  • Is there a way to find out, whether the student or the full version is currently installed?

    Hi everyone! First of all: Merry Christmas! A longer text with some background information is following. My question will be at the bottom. My computer is a good boy and it didn't disappoint me for quite a while now. I had once installed the student

  • Sizing of catalog using an external 7 terabyte RAID

    I have just purchased LR in order to see if it can efficentaly catalog my 100k of raw photographs (19 meg each).These reside on a 7tb network drive.  Since LR does not allow me to place the catalog on a large external network drive. I want to know ho

  • Adobe Media Player failure solved

    Hi. I got this problem a few days ago. And today I´ve discovered why was the problem being caused. I had installed DivX on my laptop and that was causing a trouble betwenn Adobe Media Player and DivX Reproductor Video. That was a kind of conflict bet

  • Can a firewire iPod Mini be changed to USB?

    I've just bought a new MacBook. My older Mac is a Mac Mini and my iPod Mini connects to it via Firewire. Can I simply get a USB iPod cable to connect the iPod to the MacBook? Or is there anything else I can do to use the iPod with the MacBook?