My MAC fan runs extremely loud when I use Safari. What can I do to fix it?

When using safari my Mac gets extremely loud. No flash content, no video. It can be sitting there untouched just with safari open and out of no where the fans kick in and loud. What can I do to solve this issue?

To remove a forgotten Restrictions passcode you will need to either...
1)  Restore the Device as New...  See Section 6 here...
http://support.apple.com/kb/HT4137
OR...
2)  From a Backup created Before the Restrictions Code was set....
Restore from Backup  >  http://support.apple.com/kb/ht1766

Similar Messages

  • My phone doesnt hold it's charge and runs hot even when shut down.  what can i do to fix.

    My pone will not hold it's charge as long as it should and runs hot even when shut down.

    Shutdown all apps that may be running in the background by double clicking the home button, touch and hold an app until they all start to jiggle, then one at a a time dismiss each.  Then turn off all services you don't need, such as Bluetooth if you don't use it.
    Fully charge and see how the iPhone works, does it retain charge, run at a normal temp?  If it still is hot, etc., take it to an Apple store genius bar for testing by the techs.

  • My fan is extremely loud when i stream videos...

    my fan is extremely loud when i stream videos...is this normal? My laptop is only a month old

    It isn't uncommon that your fan should run when streaming videos, especially flash.
    Is you laptop properly ventilated ? ----> If it's resting on the bed, cushion, carpet or some other soft surface that could be blocking the vents, or which doesn't allow heat to dissipate, your laptop will heat up more than usual, and hence the fan will have to run faster.
    Is your laptop on a cool surface that is ventilated? (like a wooden table)?
    Are you running Lion? Ever since I upgraded to Lion my fan is almost always running, video or not.

  • TS3173 I have mac book pro and recently bought mountain lion online i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.

    I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.

    Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.

  • I have a MacBook running a 10.7.5 OS.  Of late it has started hanging, especially when I use Safari.  Can anyone help?

    I have a MacBook that's four years old, runs on iOSX 10.7.5 but of late has been hanging, especially when I use Safari.  Can anyone help?

    Carolyn,
    I searched my whole system and couldn't find
    com.apple.systemuiser.plist
    So that is a mystery.  However the part about:
    Go back to System Preferences > Network
    Make sure the box is selected next to:  Show Wi-Fi status i menu bar. Solved the problem.  Somehow the box had been unchecked.  Gremlins I guess!
    Thanks so much for your help.
    L.

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • My phone iPhone 5c is stuck on the loading screen when you boot up, what can i do to fix it?

    My iPhone 5c is stuck on the loading screen when you boot up, what can i do to fix it?

    Try a reset.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

  • I'm wondering if anyone else has had problems with their imac fans being extremely loud when running at slow speeds?  When the computer heats up enough for the fans to run at higher speeds they quiet down. New HD fan was just installed.

    I have an imac that I've had for a couple years.  The fans have always been loud when running at the slower speeds.  When the computer heats up enough for the fans to run at a higher speed the fans quiet down.  I had installed SMC fan control after multiple attempts with Apple to get the fan issue resolved.  That seemed to keep the fans quiet enough.  I've never had a problem with overheating.  Recently the fans were becoming loud again even running at the slightly higher speeds so I took it to my local Apple store and they replaced the hard drive fan.  I got it back and it's now as loud or louder than ever!!  And, now SMC fan control won't "stick."  The fans will speed up, but then gradually go back to the lower "loud" levels.  I'm at a loss as to what to do next. 

    Thanks jared,
    I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
    So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
    Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
    For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

  • Mac fan running too loud after update

    I have a Macbook pro 13".  (mid 2012)
    Memory: 4 GB 1600 MHz DDR3
    Processor: 2.5 GHz Intel Core i5
    Storage: 500 gb
    After updating to Yosemite 10.10, my macbook pro's fan is running too loud and producing a lot of heat. I reseted the SMC several times but it didn't help. Surprisingly, The fan also runs loud even if only 1 application is open.
    Please advice me what should I do.
    Thank you in advance!

    I have the same model and I've had the same problem for a few days. I didn't really have problems with heat, but my fan was going crazy even though I was just browsing the Internet. Maybe you're logged into iCloud and have some activity going on. What worked for me was going to:
    1. System Preferences
    2 iCloud
    3. Uncheck things like "Keychain", "Find my Mac", etc. (things you don't need/use)
    For me, I unchecked everything and logged out of iCloud. After several minutes, my fan is super quiet and not acting up! Hope this helps.

  • Fan is unusually loud when im using my computer

    I just got my computer repaired for a fan problem now when i use it after 5 min or so the fan comes on loud. all im doing is surfing the net and using messengers. anyone know why?

    i would try power cycling the machine. unplug the cord from where it goes into the power supply at the back of the machine. wait a few minutes, and then plug it back in. if that doesn't help i would do a pmu reset. you could also boot to open firmware holding apple-option-o-f and type in the following commands--
    reset-nvram (hit return)
    set-defaults (hit return)
    reset-all (hit return)
    the last command restarts the computer. hope that helps the noise. [ 8 ) ]

  • My ipod touch wont turn on so i plugged it into itunes and a link popped up and it try to restart my ipod and when the process is running it says and error occured (28) what can i do to fix this problem ?

    my ipod wont restart and it says error has just occured (28)

    Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
    Above from:
    http://support.apple.com/kb/TS3694#error28

  • My daughters Ipod touch was stolen and retrieved, but now it won't work. It only says Ipod is disabled when turned on. What can I do to fix this?

    When device is started the screen says Ipod is disabled. It will not allow me to do anything. How can I fix this issue???

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My Mac won't charge my iPad or iPhone anymore, what can I do to fix this?

    My Macbook Pro will no longer allow me to charge my ipad or iphone through the USB ports. There has been no damage to any of my devices, and it will still work when connected to my printer using the USB port. 

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Until it is fixed, use the charger that came with iPad and iPhone.
    Best.

  • When i download itunes 10.6, it downloads but has an error when it installs. What can i do to fix this?

    hi, i tried to download itunes 10.6, the download worked fine, but halfway through the installing it stopped and gave me an error. does anyone know how to fix this?

    but halfway through the installing it stopped and gave me an error.
    What does the error message say? (Precise text, please.)

  • I am no longer able to scroll when in Safari what can I do to fix this

    Safari and mobile me no longer work with my scroll function on ,my mouse.  The mouse works just fine in other browsers.  I have the latest version of Safari on my system.  How can I reapir this problem?

    Hello Jchild!  I'm sorry for any issue with group messaging on your iPhone 4. Let's see what we can do to get this going for you OK? Please try these steps first: http://vz.to/1DVzEoW Once that's done, please send the group message and let us know if the message is received by the recipients. Please include your own number in the recipients list, so you can test and make sure you receive it too. Keep us posted!  ChristinaB_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for

  • Not able to export context data to excel in NWDS 7.1

    Hi all, We have a requirement wherein I need to export data from a local context node to an excel file. I am using jxl.jar for this purpose. I am using a FileDownload UI element to generate the excel. I am working with NWDS 7.1 EhP1. I am using the f

  • Reg.Creation Of Formula in PP

    Hi all, Please Tell me How to create formulas For Calculating Machine Time,Setup Time, Labour time in the Work Center. My Calculation of Finding the Product cost which is manufactured Using CNC Machine is below CNC M/c Hr Cost - Rs 300 ie.,Rs.5 per m

  • System resets the sales order item price changes after save in VA02.

    Hi All, We have implemented automatic credit control at sales order level. System is blocking the sales order once saved in VA01. But if I do any changes in prices at item level in VA02 and save before credit releasing the sales order then system agi

  • Using AX as a wireless reciever for desktop

    Hello Apple World, I have an Airport Extreme (Purchased within last 3 mo.) and I was wondering if i can use it as a wireless receiver for my desktop that has no wireless card. My cable modem has wireless on it and my desktop is in another room. I wou

  • Help regarding Cash Position and groupings

    Hello Everybody, I am encountering a problem regarding cash position. I already defined in FS00 all the necessary information needed, like planning levels, ticked cash flow relevant etc. I also made a posting via FB50 to these GL accounts. I am not q