My mac freezes just for a second about every two seconds and it gets really hot really fast?
When i am watching a video or just scrolling on a webpage, even typing, there is a small glitch ever 1-2 seconds where everything freezes just for a second. Its almost as if its lagging all the time. I have tried every utility and cant figure it out. Also, it gets pretty hot pretty fast, even when im doing much on it. Are these two things related? how do i fix it?
thanks
If you can, visit an Apple Store. Before you do, set up the phone "as new device" without using the backup afterwards, described here: How to back up your data and set up as a new device
If you still have problems after that, visit the Store or call Apple to get it serviced: Apple - Support - Service Answer Center
Similar Messages
-
My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
RichYou won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. -
i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!
I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus -
Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal
My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?
take a look at this topic, maybe will help:
http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15 -
MBP freezes for 2 seconds and restart!
hi there!
in february i bought my MBP and have sometimes software crashes of MAIL, SAFARI, iDVD..... I thought there were the normal problems after APPLE changed to the INTEL processors, but sometimes (once in a week) my MBP freezes for 2 seconds and reboot. I run the hardware test and everythings seems to be fine
can somebody help me? thanks a lot!
MAC BOOK PRO 2.16 MHz Intel Mac OS X (10.4.9)Hi bfunky,
Try resetting the usual suspects, PRAM, PMU, etc.
If that doesn't resolve anything maybe it's time to take it by an Apple store to have it checked out.. -
I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!
See if you can boot into single user mode with Command S.
-
Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?
Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.
-
Photoshop elements 12 won't load up on my PC. The first time I try to load it up I get a large egg timer, which lasts about 3 seconds. The programme then closes and if I try to load it again I get the circular icon which spins for 1 second and disappears. I've tried rebooting several times but nothing happens. Please help!
Hi,
Please try resetting preferences?
On Windows: Goto %appdata%\Adobe\Elements Organizer\12.0\Organizer folder and rename the files “psa.prf” (to say psa_old.prf) and “status.dat” (to say status_old.dat).
Try launching Organizer and see if it launches fine.
Thanks
Andaleeb -
My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??
Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck! -
I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.
What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in. -
I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?
Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
You'll get the help you need in that forum. -
When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?
When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?
-
Hey, i just got the iPhone 5s and when i unlock my phone the clock on the lock screen shows up faded for a second and goes away is this supposed to happen
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first.. -
My ipad 2 just went off. It was working perfectly while charging. I have pressed the power button for ten seconds and it's still not coming on. What do I do?
First, confirm that the iPad is charged and then try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.
Maybe you are looking for
-
How do i find out the tables (data)effected in a schema after a particular time stamp
how do i find out the tables (data not structure)effected in a schema after a particular time stamp? pls email in [email protected]
-
'Old Difference' field in Foreign Currency Valuation transaction
hi all, While clearing a foreign currency transaction in local currency, the some part of the exchange difference is going to balance sheet exch val acccount and rest to P&L exchange val diff account. When i checked in F.05, I could find the amount (
-
When I attach a photo to an email and try to send it, it is stuck in my outbox (which I can't get to). POP3 account. Any ideas what the problem might be?
-
[solved] netatalk / afpd faulting
First let me state that this was working flawlessly up until (as best I can tell) around 1:30pm today. I set up my Arch server to have netatalk/afp serving storage to the Macs in my house. For some reason now the logs are throwing all kinds of errors
-
Question about future Camera Matching Profiles
Hi all, I am a Nikon D300, Windows Vista user. Recently I've been comparing Camera Matching Profiles on ACR and Nikon's own proprietary Profiles on Nikon Capture NX with the same NEF files. What I've found is that Camera Matching Profiles don't match