My mac goes into spin mode everytime I open a document or application

My macbook pro couldn't find my Gmail account even after I entered the correct password.  It was the same for my iCloud account. I then upgraded to the Mavericks 10.9.3 and it didn't help.
I also get the spinning wheel when I open a file or application.   Help.

If any disks other than the startup disk are mounted, unmount them and test. Otherwise, see below.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • Mac goes into sleep mode amd doesnt come out!!!!!!!

    Hi, new to this so sorry if this is a dum question. I have installed Snow Leopard on my IMac and Air. No prob on the Air but probs with the IMac. Everytime it goes into sleep mode I get a black blank screen and it wont come back up? have to reboot everytime or leave front row on with a slide show! any ideas welcome?

    I looked around the internet and found an old post that seems to have solved the problem.  I had a relatively new USB port (powered) that I unplugged and, ta da, the problem disappeared.  I'm not sure why this happens (I'm not a tech person) but it seems like this should have been worked out in testing somewhere.

  • HT3205 mac going into sleep mode for no reason

    my mac is playing up. Every time I open it, the screen will appear briefly then flash off as if I have put it on sleep mode. When I close the top and re-open it it does the same thing again, sometimes it works for a while, but will turn itself off again after a few mintues.
    I have tried charging it, turning it off etc and nothing seems to be working. Does anyone know what this means and could help me please?

    Problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset:
    Resetting the System Management Controller (SMC)
    Resetting the SMC on Mac portables with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.

  • My Mac goes into sleep mode while playing videos or DVDs.

    This started happening last week. I was watching Veronica Mars and all of a sudden my computer goes to sleep. At first I though it was because I had it on energy saver mode, but it just kept on happening. Tonight I wanted to watch Camp Rock on Disney XD and after a few minutes it shut down. I went on You Tube to watch my friend's videos and the same thing happened. Does anyone know what's wrong?

    Welcome to Discussions - the problem is probably overheating, which causes your computer to sleep. Look in you Applications>Utilities>Console and see if your System log shows "maximum temperature exceeded for 30 seconds". This would indicate a problem with your Power Supply Unit or a faulty temperature sensor. You should take it in to be looked at.

  • Mac goes into sleep mode

    A few months ago I was had a problem where my Mac was overheating. The geniuses over at the Apple Store told me to put a fan behind it and call it fixed. The error I was getting back then said that there was something wrong with the heat sensor. My Mac shuts down, but the console gives me this now:
    Sep 15 20:00:03 Stephanies-iMac mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
    Sep 15 20:00:11 Stephanies-iMac mDNSResponder: Repeated transitions for interface en1 (192.168.2.2); delaying packets by 5 seconds
    DeviceAddedCallback(): iterator=2203, retain count=2
    device ae07 (PTZ-430) found.
    Sep 15 20:01:02 Stephanies-iMac mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
    Sep 15 20:01:07 Stephanies-iMac mDNSResponder: Repeated transitions for interface en1 (FE80:0000:0000:0000:0214:51FF:FE84:667C); delaying packets by 5 seconds
    Sep 15 20:01:09 Stephanies-iMac mDNSResponder: Repeated transitions for interface en1 (192.168.2.2); delaying packets by 5 seconds
    I can't afford to pay another $80 for nothing, especially since I'm upgrading in February. It stopped for a new days after I installed a security update. It's gone into hibernate 4 times since I started this post. HELP!

    Although mine is not over-heating (I don't think) my mac has just recently started to "go to sleep"... I would have posted my own post but your title describes what is happening to me!
    This is the post I made to the Using Tiger forum:
    This started happening about a week ago. I have the Energy Saver "Put the computer to sleep when it is inactive for:" set to "Never". Also I keep the computer up 24/7 and it doesn't happen over night. But lately this is happened a few times. Yesterday, my wife called me at work and told me that "the screen was black" I asked if the light was pulsating on the front of the mac, it was. Tonight after work I was ripping a CD. I had dinner and went to the computer and it was asleep. I mentioned it to my wife and she told me it happened twice today.
    Is it possible that some key sequence or something is putting it to sleep? Of course, I didn't touch it and it went to sleep. Is this a possible hardware issue? I still have the extended warranty (at home service). Should I have it looked at? Its not a huge deal, but I have it configured to never put it to sleep (I do how the "display" sleep after 2 hours of inactivity though.
    Hope someone might have a suggestion.
    Thanks.

  • Force monitor detection or stop my t61p going into retard mode everytime I undock.

    I run XP with a t61p with quadro fx570m and an advanced mini doc, connected to a dell 2405fpw via dvi. Every now and again after I undock, I can no longer enable the secondary screen.
    In Display properties, the screen shows but is greyed out. If I attempt to enable it  by clicking on it and ticking 'extend my windows desktop onto this monitor' and clicking apply, the screen flickers and nothing happens.
    The nvidia control panel reports only a single display. Attempting rigorous display detection achieves nothing.
    The only solution I have found is to reboot my computer. 
    This is incredibly annoying. Is there a way to fix this?

    Unfortunately hitting undock and/or fn+f7 didn't do that much (the latter would sometimes swap the primary display between the monitor or the lcd, but still not enable the secondary). However, I just wanted to add that sometimes (but not always), closing the laptop lid for a few seconds and reopening would allow me to enable my secondary screen (either that or the various prayers, dances and sacrifices to the gods are finally paying dividends)

  • Late 2012 Mac mini with OSX 10.8.2 has started shutting down instead of going into sleep mode.

    Sometime in the last week or so my mac mini has started going into full shut down instead of sleep mode.
    I have tried checking and unchecking energy saver boxes but haven't found anything which will get me back to where I used to be - and I haven't knowingly changed anything to make this happen.- maybe an OS update caused it?
    The machine will fire up with a tablet click rather than needing the reset button to be pushed so clearly the machine is sort of halfway between sleep and full 'off'. Most frustrating as one of the key issues for me in getting this my first mac was its easy sleep and super quick fire up compared to windows.
    Any help appreciated
    Oh yes  I just remembered that I did just install 2 8gb of crucial RAM (to replace the supplied 2 2gb but surely that can't have anything to do with it - can it)?

    Adding to my first post I can now advise that when the mac goes into sleep mode the light on the front stays on (it does not pulse so clearly it is not really sleeping).
    When i click the tablet / keyboard this is actually what triggers the mac to reboot
    I have tried resetting the SMC as per the following link to no avail
    http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
    Help please!

  • Mac Pro randomly goes into sleep mode

    My (mid 2010) Mac Pro, OS X.6.8, randomly goes into sleep mode and I can't wake it, have to power it off and reboot. Just started to the best of my knowledge Friday (Jan 6, 2012) I've had it happen surfing the web in Safari, while working on an illustration in Adobe Illustrator, while running Apple Hardware Test, using 23" LCD connected by HDMI and DVI-D, Disconnected monitor and connected 12" Cintiq (LCD Tablet).
    The monitor goes black, says "there's no signal coming from your computer", none of the keys will wake it. I have to hold down the power button until it turns off then power it back up. The time between the sleeps varies, 38min, 1hr 34min, 5min, 2hr 17min, 12min, etc. I disconnected everything (except keyboard, mouse, monitor) still the same. Opened and removed the ATI Radeon HD 5870, and noticed the PRAM battery, replaced it with a new one, thought that fixed it, worked for a long time then it happened again.
    Tried Apple Hardware Tester again, it said everything is fine, ran it again an error popped up: 4SNS/1/40000000:Te1S-99.364, wrote it down then it slept.

    The next time this happens open your mac and see if there is still a fan running.  If so you are not sleeping, you are in a thermal cutoff.  Keep you mac cover off.
    Now reboot as you always do.  Take a look at the fan in your 5870.  Is it spinning?  If so, try to keep an eye on it and see if you can "catch" it not spinning. 
    When the fan doesn't start, or if it does then stops, the card will overheat and the machine will go into thermal cutoff.  The amount of time is variable.
    I speak from experience.  I am currently on my third 5870 video card.  Both the previous two had this fan problem.  The only wrinkle in my theory for you is that I wouldn't expect more that, say, 15 minutes of up time at the most, not hours like you got.  But it may be that your card is starting ok, but stops sometime later.   I chalk it up to the lousy fans Nvidia uses in the 5x70 cards.
    FWIW, if you happen to catch the fan stopped before the machine goes into thermal cutoff you can give it a little nudge with your finger to get it going again.
    I recommend one of the various temperature monitors.  I use iStat Menus and display some key temps in my menu bar.  Of course after going through two of these cards I am a bit paranoid!
    Some other temperature monitors:
    iStat Pro
    Temperature Monitor
    Hardware Monitor
    Note, after typing all this I also realized you got a AHT 4SNS error. I would run AHT again to see if you get that error again.  If so that means "Check Main Logic Board" and you may have a more serious hardware problem than just a video card!  So my other recommendation is that when you machine fails again look inside for any lit diagnostic leds.  There's some near the dimms but there are others on the board as well.

  • Mac Tower Pro  10.8.5 keeps going into sleep mode

    Purchased from Apple, refurbished 2012 Mac Tower Pro.  At the same time, purchased a new Dell U2713HM, 27" monitor.
    Have been operating on this new system since about the first week of December 2013.
    Issue:
    The computer has constantly gone into sleep mode after a few minutes of no activity.  I can have iTunes radio playing, but the system still goes into sleep mode.  As  I am typing and moving the curser, the machine stays awake.
    This has caused much frustration because when it goes into auto sleep mode, it quits all programs that I am in, and when it does this, I lose all the work I had accomplished.  It litterally closes everything and goes to sleep in about 2-3 minutes of no activity.
    BTW:  the computer and monitor have all its new OEM cables that came in the box, when I purchased the units.
    Solutions attempted:
    System Preferences — Energy Saver:  computer sleep and display sleep set to "never"  and unclicked the box "Put hard disks to sleep when possible." 
    Dell settings:  Turned off all energy savers.
    Results:
    Nothing.  Problem persists.

    I apologize for the angst.  The problem has cost too much money in lost time and material because when it would automatically shut down after a few minutes, all my work was lost. 
    I misunderstood the terms of the warranty.  Thank you for your input and patience.  Much appreciated.  For the benefit of others that experience this with a new Mac that auto shuts down.  Check the following:
    1.  Go to System Preferences.
    2.  Click on Security and Privacy.
    3.  Click on Advanced  (bottom right corner)
    4.  If the first line is checked (Log out after 5 minutes of inactivity);  uncheck it and then click OK button.
    5.  Be sure to click the lock before existing Security and Privacy.
    Now the machine will cease shutting down programs to go into sleep mode as soon as machine is inactive for a few minutes.

  • How can I select shutdown & close the display w/o going into sleep mode?

    I have learned to wait untill the MBP full shuts down before closing the display. In the past I have pressed shutdown closed the display only to find out later the MBP goes into sleep mode before fully shuting down. When I reopen the display the computer finishes the shutdown process or worse the battery is dead.
    I would like to select shut down, close the display and walk away while the computer completes the shutdown process.
    Is there any setup options or apps. that will allow this?
    Thanks, Joe
    (new to the mac)
    MBP   Mac OS X (10.4.6)  

    Well hello there, and welcome to Macintosh.
    Unfortunately you can't change anything to stop this from happening. The shutdwn process goes about its business killing processes and applications that have been running. The sleep process interrupts ALL business going on in the OS, and puts the machine into low power mode, as it is not aware of the nature of the running processes (in this case, the shutdown process), knowing only that they must be slept and the machine dropped into sleep mode. You gotta wait it out before you close the lid.
    I would suggest sending a message in OS X feedback requesting this as a feature!
    If you find this response helpful or if it solves your issue, please click the appropriate icon in the header of this reply.

  • Ipod Touch Keeps Going Into Recovery Mode

    Hi, I've had an Ipod touch for about 6 months now and haven't really had any problems with it to date. Recently (around the time I installed the 1.1.3 firmware), it seems to be randomly going into recovery mode.
    When I plug it into my imac, Itunes says it detected an ipod in recovery mode, and I have to restore it. During the restore process the screen lights up with apple logo and spinning wheel, it says successful restore. But the ipod doesn't restart... just goes straight back into recovery mode. It usually takes about 2 or 3 restore attempts before it works properly. I resync and everything goes back to normal for a few uses. Then I go to turn it on and nothing... itunes just tells me to restore again.
    Anyone else seen this issue before? I'm pretty sure the batteries aren't flat (since when it finally does restore, they usually start around half full... and I've tried leaving it on the charger for a few hours to no avail). And I only turn wifi on when I need it (usually turned off). I've tried pretty much everything I can find in the help files (hold button, hold+power, hold while connecting to itunes, nothing seems to wake it up... just black screen until a successful restore happens)...
    Thanks in advance...

    I had the same problem with my Touch but it started the first day. It was also doing weird things like telling me the battery was full then half an hour later warn me there was only 10% left. It got better for a while but long syncs with iTunes usually threw it into restore mode again.
    I finally brought it to the Apple store nearby and they were able to recreate the problem when they tried a sync on their machine. They told me it was a hardware issue and did an exchange right there. I have heard bringing it to an Apple Store will increase your chances of an exchange. Sending it in may or may not get you a new one. Good luck.
    Message was edited by: sdutcher

  • Unexpectedly goes into Sleep Mode... All the time!

    I've had this Powerbook for about 2 years now, and I've got some problems. About every 5 or 10 minutes, it goes into sleep mode! It acts as if I close the screen, so I wake it up by pressing the spacebar. But sometimes... pressing the space bar doesn't wake it up, not even holding the power button turns it off! I have to remove the battery to restart it! Can someone help please?
    By the way, I checked "Power Save" settings in System Prefs and everything seems to be correct.

    If you have issues with a Mac or display that goes to sleep at inappropriate times, you may have a problem with Energy Saver. Delete the following .plist files and restart:
    -/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    -/Users/username/Library/Preferences/com.apple.systemuiserver.plist--
    (username is your name or System Administrators name)
    -/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
    A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.
    Some, in these forums, have had luck fixing sleep issues downloading the Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
    Yours would be the 10.4.7 Combo update. Others reading, download the combo update that applies to you!
    Cheers!
    DALE

  • IPhone 3G goes into Recovery Mode after every restore

    Every time I restore my iPhone 3G, it goes into recovery mode right after an error-less restore has been completed. Yes, I've tried using tools such as TinyUmbrella and RecBoot and iRecovery. The device was not jailbroken when I tried to update it to 4.2.1 yesterday. They all reboot the phone and just throw it back into recovery. I have no idea what to do. Searching is futile. I thought I might as well do what I almost never do and ask these communities for support.
    I hope they don't disappoint.

    I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
    It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
    You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
    1) Download and install TinyUmbrella for your PC/Mac.
    2) Make sure iTunes isn't running and connect your device via USB.
    3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
    4) Profit.

  • The plugin container crashes if the computer goes into sleep mode or screensaver mode

    it seems everytime I put my computer into sleep mode or if it goes into screensaver mode the plugin container crashes

    Update it appears that if I leave like a video or game open while I leave or turn it into safe mode it crashes it

  • HT1414 iphone 4 goes into recovery mode error 40

    iphone 4 keeps going into recovery mode, when try to restore the iphone it comes up with error code (40), how can this be fixed?

    Hi November-Rain,
    I found the following information about error code 40:
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    This information was found here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Cheers!
    - Ari

Maybe you are looking for