My mac has a black screen

My macbook pro has a black screen, when i press the power button it comes on, i hear the chime and then nothing. the backlight is working so i dont think its the display. please help!

Restart it & hold the Option/alt key down at bootup, choose the Install Disc & start over, or maybe this first...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214

Similar Messages

  • My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

    My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
    Will not show up in safe mode, will not show when started from Windows 7 DVD.
    I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
    Can see the PC volume from Mac side with files.
    I've looked at all the online solutions so far and have tried most of them without success. Please help!
    Specs:
    2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP52.008E.B05
      SMC Version (system):          1.42f4
      Serial Number (system):          7302300GANE
      Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
      Sudden Motion Sensor:
      State:          Enabled

    EDIT: RESOLVED
    For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
    Specifically, the posts by Dunsany and valkyr did the trick.  I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally.  I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
    Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again.  I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time.  Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black.  I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
    Hope this helps someone else!

  • My mac book air was fine yesterday but today it has a black screen and wont wake up

    My mac book air was working fine yesterday, I left it turned on.  When I went to use it today it has a black screen.  I have tried many keys but no response.
    Help!

    Try pressing the power button.

  • My Macintosh Classic II Performa 200 has a black screen !!!

    my Macintosh Classic II Performa 200 has a black screen, it is making noises when it turns on but exept that it doesnt come on, HELP !!!

    Could be a number of reasons for this, such as faulty components (capacitors, semiconductors et cetera).
    Some Macintosh computers can even show no-video symptoms if the internal (logic board) battery is weak/bad.
    Before you continue, it might be a good idea to  test a PRAM reset (link below), and to try starting from a disk tools floppy.
    http://support.apple.com/kb/ht1379
    Finally, a warning. Please note that opening a compact Mac can be very dangerous because of the high voltages involved, and must only be carried out by someone with the necessary expertise.
    Jan

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • My iTunes 11.0 (mac) has a black background colour and I can not see all of the information.  How do I change the background colour in iTunes 11.0 (mac)

    My iTunes 11.0 (mac) has a black background colour and I can not see all of the information for each song.    How do I change the background colour in iTunes 11.0 (mac) so I can see check boxes etc.  My download window shows no information, it is entirely black.

    Trent o
    Someone else in the forum told me how to do this.  If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode.  If you don't have Onyx, I'd suggest getting it.  It is freeware and used to help maintain your system.  Good luck
    Paul

  • My iPhone has a black screen!

    Hello apple community. My dad just sent me a used iPhone 4s for my birthday about 1 week ago. Today I was using my iPhone and I went to eat and left my phone on my bed. Then when I came back , I tried turn it on and it didnt turn on. It has a black screen but it functions properly. It might be a display screen error or something. I tried the famous method of pressing the home button and the power button at the same time for like 10 seconds but it still wont work. I also plugged it in on my computer and it shows everything on there but my iPhone screen is still black. I hadthe same problem earlier when I got the phone but it turned on after a little while of charging it. What is going on? I live in a small town in Mexico and there are no Apple stores nearby! What should I do? Please I really need your help on this issue. Thank you very much for your attention and hopefully you guys can help me.

    Hello there, Kevin Barreto.
    To make sure if it is a hardware issue or not, the following Knowledge Base article should help guide you further:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Specifically the section on:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • My ipod has a black screen and  will not turn on how can i fix it

    I have tried everything that i can to get my ipod to turn on.  It has a black screen and hasnt done anything atleast 2 weeks.  Please help.

    1. Can you get it to light up doing a hard reset and holding the buttons down for at least a minute?
    2. Is it charged up?
    3. Is the USB power cable good?
    4. Can you get iTunes to recognize using recovery or DFU mode?
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Ipod touch 4 has a black screen with white and green lines across it and wont turn off

    My sons ipod touch has a black screen with sometimes white lines and then flashes to colored lines. Also when i try to turn it off it turns right back on and has the apple symbol but then goes back to black screen with lines. what to do?

    - Try:
    iOS: Not responding or does not turn on
    - If not successful let the battery fully drain. After charging for at least an hour try again.
    - If still problem time for an appointment at the Genius Bar of an Apple store.

  • My iphone 4s has a black screen. If I hold down the on button, it will occasionally flicker and then go black. How do I get it to turn on?

    My Iphone 4s has a black screen. If I hold down the ON button, it will occasionally flicker and then go black again.
    Is it dead? Is there any way to fix it? It's sitting in a bag of rice right now, a desperate measure.

    Are you saying it got water damage?  If not what mende1 suggested, or the following
    http://support.apple.com/kb/TS3281
    is the way to proceed.  If it got wet all bets are off. 

  • When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press home or lock buttons firs

    When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up so I can see and click the hang up button, but it then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press the home or lock buttons first

    Wow- thanks Jim! I removed the case and voila... it worked. Knock on wood that you solved my problem with such an incredibly simple solution. I'll find out where this proximity sensor is and make sure my case does not interfere with it.
    Thanks so much.
    Annick

  • My ipod has just black screen and the home button is not working. what will i do? help please!

    my ipod has just black screen and the home button is not working. what will i do? help please!

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPodin recovery mode use this prgram.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201412 My iphone 4 has a black screen with the itunes musical note logo. Below this a USB plug in with an arrow pointing up. It will do nothing else. What can I do to fix this problem?

    Header 1
    Header 2
    My iphone4 has a black screen with the itunes logo. Below that is a USB port image with an arrow pointing up. The phone will do nothing else. How can I fix this problem?

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • My IPod Touch has a black screen.  When held in an angle u can see the slider to unlock it but it will not respond to my touch

    my ipod has a black screen.  When I hold it at an angle i can see the unlock bar and date/time.  It will not respond to my touch to unlock it.  Any ideas to what is wrong with it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • PDF Forms Comparison

    Dear LiveCycle Users, I desperatly need your help on that one... We are using PDF Forms (created using Adobe LiveCycle), these forms are injected with XML Date using LiveCycle servers. We need to compare to these forms between each other, but the bui

  • How do I get a link to sending an email to function?

    When I get an embedded link to send email via my hotmail account nothing happens when I click it. Also I cannot "send a link" to anyone in hotmail. Is it FireFox or Hotmail? or Both not being compatible.

  • CD and USB won't automount

    Hello there! I bearly got arch linux installed in my machine. Managed to install most of my drivers so far, however I can't manage to make my USB automount and appear in the desktop. It won't automount the CDs that i put inside, or even show the icon

  • Transitions (yet again!)

    I know there have been other questions about this but I still haven't solved my problem. I can only use fade and wash transistions (all others are greyed out, but I can preview them). PLEASE PLEASE PLEASE I beg you! Has anyone got any idea what I am

  • RFC to JDBC "No messages available for selection"

    Hi Guys I am testing my RFC to JDBC scenario, and on  sxmb_moni I get error: "No messages available for selection" on SE37 I have ran my RFC with a data. On SM59  I created and test my RFC destination its working fine, on the SM58 no errors, I am usi