My mac has frozen after upgrading iphone to osx 6

I successfully upgraded my iPhone 4; my wife logged onto her screen name to do the same with her 4; wiped out all her apps and the Mac can't be closed down...
The only difference I can see between our screens is that hers has a Setup Assistant.  If I click that, the screen goes blank.

While you are certainly entitled to your opinion, just be aware that after every iOS update there is a group of users that report faster than normal battery drain.
The vast majority of battery issues are resolved by basic troubleshooting.
Most iOS users never experience battery issues or any other issues for that matter after iOS updates.
There is no battery issue to fix or any reason to believe that a fix for these mysterious battery issues will appear in the next iOS update.

Similar Messages

  • HT4623 my iphone 4 s has frozen after attemting to install ios7 what can I do?

    My iphone 4s has frozen after attemting to install ios 7

    Reset the device.
    If it does not boot up normally, put in DFU mode (google it) and restore via iTunes.

  • My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.

    My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.
    H

    I've had the same issue and despite clearing the PRAM and powering on and off repeatedly this is what has (at least temporarily) resolved my issue:
    I've done this 3 times and sometimes it works right off the jump other times I've had to wait a bit and try again or power off and try again, once the start up screen is frozen hit Command : Option : Shift : Esc and a window should pop up "You restarted because of a problem..." from there you can go to your desktop. I haven't found an actual resolution to fix the problem but this does get you into your computer.
    Hope this helps!

  • After upgrading iPhone to 8.1.2 my mail won't retrieve

    After upgrading iPhone to 8.1.2 , I can't get incoming mail. Not sure where to begin. Has anyone else had this issue?

    Snap my emails stopped this Wed 17th Dec too, not sure why I've deleted reset it three times without success any help would be welcomed please x

  • The software update on my Mac has frozen it completely

    The software update on my Mac has frozen it completely at the grey screen. I have tried everything to exit it and nothing is working! Help please!!! I've tried alt command esc, forcing the computer to shut off then restart, letting the power drain, nothing. I can't get the computer to even give me the beach ball of doom, it's this grey circle of perpetual nothing.

    Hello Heatherb90,
    It sounds like you are unable to boot your computer after a recent software update. I would use the following troubleshooting from the article named:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Disconnect, test peripheral devices and network cables
    Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
    Disconnect any Ethernet cables.
    Start up your Mac.
    If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
    Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
    If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
    If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
    Start with this troubleshooting and work your way down the article as needed.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Apple 4s frozen after upgrade

    My iphone is frozen after upgrading the software.  How do I rest the darn thing.

    hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • HT4910 My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    Did another window open with the pasted information?  If so, try hitting "enter/return" key and "delete" key at the same time.  That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

  • After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

    After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

    I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
    All wishes everyone...

  • After upgrading iphone to 5.1, syncing is endlessly stuck on syncing notes.  How do you fix this?

    After upgrading iphone to 5.1, syncing is endlessly stuck on syncing notes.  How do you fix this?

    Hi Arthur Daly,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like iOS device's are not appearing in iTunes. I would recommend that you read this article, it may be able to help the issue.
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Cheers,
    Mario

  • How do I copy the Mac OS Lion after upgrading?

    How do I copy the Mac OS Lion after upgrading. I upgraded to OS Lion and now I want to do clean install because my macbook became slower since i installed lion.
    Please, help! Thanks.

    You need to get on a Snow Leopard system, log into the App Store with your Apple ID, then download the Lion installer. The re-download is free. After the installer is downloaded it will start automatically. Now, quit the installer. You can now make a copy of the installer that you will find in the Applications folder.
    Now, you also may be able to get this to work: Open the App Store application. Hold down the OPTION key while clicking on the Purchases icon in the toolbar. This is supposed to activate the Install button to the right of your Lion purchase entry. Clicking the Install button will then re-download the Lion installer.

  • AFter upgrade, iPhone says tv show (HD) can not play on this iPhone

    AFter upgrade, iPhone says tv show (HD) can not play on this iPhone . It is the SNL HD TV SHow will ferrel episode. DOwnloaded from iTunes.

    when you bought it, did 2 versions download? For a bunch of shows I bought recently, I got 2 versions - a HD version and a standard (SD) version. To make room, I moved the files off my computer. When I wanted to watch the individual episodes on my iphone, I'd move the SD version back to the computer, and sync it with the iphone. After the recent upgrades - snow leopard, itunes 9, iphone 3.1, something got broken. When I would transfer the SD versions to my computer to sync with the iphone, for some reason something would rename the files with a (HD) tag at the end of the file name (even though they were the SD versions). Removing that tag in finder was all I needed to do to make it work. Odd.

  • After upgrade iphone 4 to ios 5.01 itunes don't install some apps.

    After upgrade iphone 4 to ios 5.0.1 itunes don't install many apps (ibooks too).
    I try to delete them from itunes, download again and sinc with iphone, but it fail with the same message: "app_name Failed to install".
    Only some Apps were correctly installed (about 1 every 8 apps).
    The only way to install apps with errors is to download them directly from iphone. How to resolve this iusse?
    I can't download again all apps from iphone.
    Itunes is the lastest version and the Pc is on windows 7.
    I had some trouble to upgrade to ios 5 (error 1 and 37 and so on) because security problem on win 7, but I relsoved them.
    Thanks for your help.
    Fabio

    Bonjour, Here is the trooubleshooting document
    http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
    Bonne Chance

  • Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

    Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

    Problem solved... just saw the answer in another thread... https://discussions.apple.com/message/13110222#13110222

  • After upgrading iphone 5 to iOS 7, I cannot install new apps

    After upgrading iphone 5 to iOS 7, I cannot install new apps.  I get the message that I must first read and agree to iTunes terms and conditions.  I read the terms and conditions online, but I don't see a way to agree when I install or re-install iTunes 11.1.  I can update existing apps ok, though. 
    Anyone have this problem and find solution?

    Delete & ReInstall the App Store...

  • App store has frozen on my iPhone 4

    App store has frozen on my iPhone 4 - I can open it but can't get further - any advice appreciated!

    I have the same or similar problem. Resetting the iPh 4 doesn't work.
    App Store shows 94 apps to update via the red badge (I've been traveling away from that iPhone in another international carrier territory and use another iPhone, 4S this time).
    When I touch the App Store icon, it launches and stays "loading" forever...
    Other suggestions?

Maybe you are looking for

  • ADDING SOURCE SYSTEM FIELD IN MY QUERY

    HI ALL, i WANT TO DEVELOP A CUSTOM REPORT WITH SOURCE SYSTEM FIELD IN MY QUERY WHICH THE FIELD IS NOT COMING FROM THE CUBE . PLEASE COULD SOMEONE HELP ME IN THIS REGARD. MAX PTS GIVEN REGARDS, AXEL

  • Can't get a wifi connection

    Can anyone help me. I am struggling to get a internet connection on my ipad 2. My home wifi is working (mac book working fine), but despite my ipad showing i am connected to my home wifi, Safari says "safari cannot open the page because it is not con

  • New fields to MM01 Table Control

    Hi All, My requirement is to add the LAENG (Length), BREIT(Width) and HOEHE(Height) fields to the table control in AFS Weights and Volumes TabStrip of MM01 Transaction and we need to update these values in /AFS/MARM table. This is an AFS System. I ha

  • ExportToDisk as PDF scales report

    Hi all. I've developed a little system service using Visual Studio pro 2008 with CR 2008 Basic for VS2k8 that shall export a small list of reports as PDF files at night. When I open the reports in Crytsal Reports 9 the reports are shown correctly, wh

  • To install xi 3.0

    hi experts, i am planning to install xi 3.0 , so that j2sdk 1.4.217_ will work on that? or which version i have to use , give me some appropriate suggestions thank you