My mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?
my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?
Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."
As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.
Similar Messages
-
I have already tried turning the power off and back on, holding the home and power button for ten seconds and shutting it off that way, and disconnecting from the wifi. None if those fixed the problem. However, resetting all of the settings did actually fix this issue, but then when I turn the ipod off and on again the issue is back. I don't want to have to keep resetting the settings on a daily basis, so what else can I do to fix this bug? Any help will be greatly appreciated. Thank you.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works. I am trying to get the little microphone to show up for voice messaging.
I have since fiund out that the talk to text feature is only available on devices that support Siri, iPad3, iPhone4 and later. Hope this helps someone else.
-
Downloaded the app Top 100 Hits. Set the auto lock to "never". Sounds stops in 30 seconds. What can I do to correct this. MaNUAL DOESN'T EXPLAIN.
I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex -
I have to constantly keep restarting my computer for it to connect to the internet, what can be done to correct this problem?
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use. -
Hi.
Hi, I have 8 GB apple ipod. I connected to Linux PC, afterwords ipod stopped playing music. please suggest me, what can I do for rectifying this issue. Please help me.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
Since the last automatic update (approx. one week ago) my Firefox has been running slow as molasses and I keep getting a "refresh" box popping up when the pages get hung up (very often)
What can I do to correct this? I clean my cache out at least once daily - most days more. Virus scan says I'm clear of viruses - Glary Utilities tells me that all changes to my registry have been fixed (sneaky apps trying to get in) I'm going crazy because I am used to my FF being fast! HELP!!!If you have problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
Why will my iPad 2 not recognize any iPod cables? I have tried two different cables in both the wall and in my laptop, but it will not register that it is receiving power, nor will the laptop recognize that they are connected.
Crizzo is right, the best way to charge is with the included power block. That said, the USB cords are interchangable as far as an of us know. (just not power bricks, iPhone and iPod bricks put out 5W of power, the iPad wants 10W and will always say 'not charging' if plugged into less power than it requires even though it will charge, just very slowly)
If you have tried to charge your iPad - with the iPad charger - with multiple cables and multiple computers and get no joy then it's time to head to the apple store and have them check it out. The 30 pin USB port can go bad - mine did - and it's a manufacturer's defect (unless there's any sort of obvious damage) and should be covered under the warranty; -
The sound on my ipod has an echoe and warped and muffled. What can I do to fix this issue?
The music on my ipod touch comes out with vocals in the background. What can I do to fix this issue?
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts possibly. The previous help has been appreciated but the problem persists.
Hi,
Try iMessaging your own iPhone and see if your account is actually logged in.
It can appear "enabled" and On line but sometimes it is not.
Also try sending from your iPhone (number) to your Apple ID and see if it gets to the Mac.
If it does not use the Sign Out button.
Then shut down the Mac
On restart add back the Apple ID to the iMessages account settings.
I also just checked My wife's iPhone as she popped up red.
It turned out her iPhone did not have Messages On.
10:00 pm Tuesday; January 28, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my paid plan in two computers?
Hi Susan,
Please refer to the help document to fix this issue:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
You may also refer to the thread as below:
creative cloud software says my free trial has expired, but I have a paid subscription
Regards,
Sheena -
I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. ThanksI have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
i cant installing iphoto .. it`s says iPhoto can't be installed on Macintosh HD because Mac OS X version 10.7.5 or later is required. and mine is 10.6.8 ... what can i do ?
You have two possibilities:
1. Keep Snow Leopard and your actual iPhoto.
2. Upgrade OS X.
If you want to upgrade OS X to get the most recent iPhoto, you can upgrade to OS X Lion or Mountain Lion. We are going to choose the most recent, Mountain Lion.
First, check if your Mac is supported > http://www.apple.com/osx/specs If it's supported, make a Time Machine backup and/or a clone with Carbon Copy Cloner, open App Store and purchase Mountain Lion. The installer will download and it will appear when the download finishes, so you have to follow the steps to upgrade OS X. See if your programs are supported > http://www.roaringapps.com
If your Mac isn't compatible, see if you can run OS X Lion > http://support.apple.com/kb/HT4949 If you can run Lion, call Apple to purchase Lion > http://support.apple.com/kb/HE57
Maybe you are looking for
-
Using Adobe Pro X I cannot create a PDF from a web page.
After a recent upgrade from a previous version of Firefox, I am now unable to create a PDF from a web page using the Adobe Pro toolbar on the web page. A "save as" box appears and then the conversion process dies. I can print the page using Adobe P
-
My macbook pro13 was saying star disk full need free space....now when i log in gets a white screen...i did R Command and i cant rebbot now
-
Mavericks upgrade seems to have erased printer utility
Have just done a clean install of Marverick on my Mac and downloaded and installed the software update that allowed me to get the printer (HP photosmart C309a series) to scan. Printed fine after loading Maverick but I can't find the printer utility t
-
E1200 bridge & have WiFi DHCP?
At my work we have Comcast Business Class, and our LAN uses the Comcast's SMC static 10'net addressing. Our two POS computers are connected to wall ports that connect to the SMC router (unsure its model number, it's screwed to the wall). There is o
-
Software used to decode the media not available on this system
"The software that's used to decode the media is not available on this system-" I get this error message when I try to import an H.264 video file (about 3.7 GB in size) into Encore CS6 to make a Blu-Ray. I've read the message threads about this pro