My Mac is freezing when using Keynote 6.2.2

Since the new Keynote 6.2.2 was released, I haven't use it.
I only use Keynote 5.3, which is MUCH much better version.
But yesterday and today I have used it. But both times my Mac is freezing ??
And I can't do nothing. And have to press on "shut down" some minutes until the Mac finally shut down ( I have to "force" quit my Mac)
So what happens?
I have an OS X version 10.9.5 Mavrick, and with 16 GB ram. And it is only 1 1/2 year old.
I don't like, that I have to "force" quit my Mac!
So what shal I do??

I have OS Mavericks and use Keynote 6.2.2 regularly with out any problems.
Try resetting Keynote; perform all the steps in the order listed:
Remove Keynote version 6.5, you must use an application removal tool for this procedure to work:
Appcleaner is free, I use Appzapper
Empty the trash
Shut Down the Mac (Apple menu > Shut Down)
Wait 10 seconds, then press the power button to restart the Mac
Immediately after you hear the startup tone, hold down the Shift key,
release the Shift key when you see the grey Apple screen
start up will take a few minutes longer than usual as the Mac is performing a software repair
when the Mac has completed start up, restart the Mac normally, (don’t hold down any keys during startup)
Install Keynote from the Mac App Store

Similar Messages

After i updated to 10.7.5 my mac keeps freezing when using Safari

After i updated to 10.7.5 my mac keeps freezing when using Safari, I've to restart it everytime. What's the problem with 10.7.5? Is this a known problem? How can I fix it?

Go Here > http://support.apple.com/kb/DL1582 and download and Install the Combo Update.
It is Safe to install over existing.
After the Successul Install be sure to Restart your computer.

Mac Pro freezes when using external drives

I have a 2009 imac 27 and a macbook pro. I do a lot of design work so I have started saving all my work to a time capusle with both computers linked up to it. This has been fine for all software used, final cut, adobe cs5 master collection, cinema 4d etc.
My problem started when I got a mac pro. If I try to save directly to the time capsule I get the coloured "wheel of wait" and the software, eg illustrator shows 100% cpu usage and never drops back down. Eventually I can't do a thing.
I installed cs6 onto the macbook pro and got the same thing.
But, I also have the same problem if I try to put files on a usb stick from the mac pro, Finder goes to 100% cpu and stops responding or transfer stops about 8mb in and doesn't go any further and I cant stop the transferto try again. It's there until I reboot. Sometimes it locks up the whole system.

The Time Capsule is a horrible place to routinely save your files. Its drive is pathetic -- suitable only for backups, and the connection to it using USB2 is horribly slow.
You have a Mac Pro now. Put another "real" drive in a bay there, and enable File Sharing. Save your files there. (Gigabit Ethernet with Jumbo frames recommended.)
As long as you have an Apple Base Station hosting your network, you can even allow the Mac Pro to sleep and use "Wake on Demand" to wake it for Sharing.

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys.. I have to restart to continue.
Does it have to do with the disk utility?
I already did the disc repair job

Open System Preferences - Universal Access and check whether 'Mouse Keys' are activated.
If so, then deactivate them. They could be the cause of your problem.
Stefan

My iMac freezes when using Firefox

My iMac freezes when using Firefox. We have to restart our computer.

TutorDaddy, if this Mac is still covered by the initial warranty or under AppleCare, take it in and have it looked at. As the old label used to say, there truly are "no user serviceable parts inside." Kernel panics very usually indicate failing hardware.
I have an older iBook G4 that started developing kernel panics and like you, despite reinstalling the OS from a freshly formatted volume, they kept continuing. I looked at the crash log and saw that in each instance of panic, the last bit of code to be accessed had something to do with AirPort. Knowing that the AirPort software was at then current levels, I surmised the problem to be a bad AirPort networking card which, on that particular model of the iBook, was a very small module attached directly to the logic board. Since the computer was out of AppleCare, I broke the machine down myself (I didn't realize that there could be so many barely visible screws in one machine) and removed the offending piece of hardware. My iBook lives but without WiFi, it now sits as a more or less desktop machine needing an ethernet connection to stay connected to a network.
I do not suggest you break into your iMac. First of all, I'm guessing one would need to be able to pull off the glass and have the necessary glue to reattach it, which is not really available to us consumers. If you're feeling adventurous enough to read the crash logs from each panic, you might be able to surmise the hardware component (or badly written application or library; it can happen) that's causing the panic. If it's a software issue, remove the offending software app and see if the panics return. If it's a hardware issue, it's best to let a competent service tech qualified on Apple hardware to handle it.
[edited to add:]
After browsing through related problems in the discussions, I saw this link to a third-party web site being handed out. Perhaps you'll find it useful: http://www.thexlab.com/faqs/kernelpanics.html
Message was edited by: Stephen Adams

Windows 8 freezing when using Firefox

When I'm using Firefox or Chrome browsers the whole entire PC is freezing.
Already posted my issue on the Microsoft Community forum, where you can read the details and the troubleshooting steps I tried:
http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-freezing-when-using-chrome-or-firefox/d6bad301-6c55-4469-96cb-0ec3d43e1113
Also I found another post here on the Mozilla forum, who had the same issue and he did not seem to solve it either: https://support.mozilla.org/en-US/questions/975278?esab=a&as=aaq
Please help me to fix this annoying issue! Thx!

Well, the MS site was a bust, wasn't it?
it would help to know how Firefox is configured.
Can you send me your troubleshooting information from the Firefox installation that's having issues? This is a good part in troubleshooting.
*Navigate to <code>about:support</code> via Address Bar
*Click the button that says <code>Copy text to clipboard</code>
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
Firefox has hardware acceleration set to "on" by default, but it's still young, which means some video cards or drivers might have problems with it. You can try to disable hardware acceleration to see if that alleviates your problems.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps for Firefox version 29.0 and above:
*Click the menu button [[Image:New Fx Menu]] and select Options for Windows or Preferences on Mac or Linux. For Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window, click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Note that if this issue happens in both Chrome and Firefox that it may be a system issue and not a Firefox related issue,
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

MacBook Pro freezes when using any app other than the web browser.

My MacBook freezes when using any app other than the web browser. I can open up Google Chrome and use it all day with no problem, but if I minimize it and try to browse through photos in my picture folder or do anything that involves the Finder, the computer just freezes up and I get the rainbow wheel. If I put in a CD to play it, the computer freezes with the rainbow wheel. Any suggestions? I would like to use the mac for more things than the internet.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

IMac 10.6.2 freeze when using iSight

Hello
i have Problems - after i upgrade to 10.6.0 from 10.5... everything was ok .
Then i installed 10.6.1 - still not big problems sometimes hang up - only power off helped .
Since i use 10.6.2 - System freeze when using iSight , ini Chat or Skype after 20 sec.
I tried to go back to 10.6.1 - freeze after 20min .
With 10.6.0 so far no freeze .
I need help .

TnT Sweden wrote:
Hello , once again
i tried these steps with reset , .... did not work .
Also in another account .
So i think i will try to make a clean Installation .
As i am "new" into Mac - what will be the best way .
I had Leopard from the beginning - now bought Snow Leopard .I have Time Capsule for Backup.
My questions - with what System CD i should start to make the clean install ?
10.5 or 10.6 ?
And How ?
What Data will be lost - or is all backup with Time Machine like Photos ,......
Thanks in advance -
If you follow your plan, you will learn a lot and not be nearly so "new" to Mac. Here are my responses to your latest questions/statements:
So i think i will try to make a clean Installation .
In our jargon, a "clean" install means that you will erase your disk and individually reinstall your system and applications, and then restore your data files. This method is very thorough and will give you a pristine system, but it requires considerably more of your time and effort than other methods that may correct your problems.
Easier alternatives are available for your consideration. Before you undertake a system reinstall, read the rest of this post and then study this document and the links in the document that are applicable to your problem and plans:
http://support.apple.com/kb/TS1388
If you decide to reinstall your system, carefully consider your installation options:
http://support.apple.com/kb/HT1545 (also applies to OS 10.6)
As i am "new" into Mac - what will be the best way .
"Best" can mean different things to different people. For example:
• The method explained in the User Guide (manual) that came with your Mac is the easiest way.
• The "Erase and Install" option from http://support.apple.com/kb/HT1545 is quicker to reinstall, but requires more work for apps and data after the OS is installed.
• Archive and Install with the "Preserve user and network settings" option eliminates the need for reinstalling apps and reconfiguring network and other user settings by "preserving" these things during the OS reinstall. Unfortunately, it sometimes also preserves the problem that is causing your difficulty.
• Secure erase before installing OS assures that NOTHING unwanted remains on your disk to cause problems after the reinstall. One pass of writing Zeros is sufficient for your purpose. Note that secure erase will take hours, depending on the size of your disk. The help article below applies to your 10.5&6 as well as the 10.4 it states,:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1011.html
Perhaps easiest of all (as least for Time Machine users) is to use your Mac's Leopard Install DVD and your Time Machine backup to "Restore" your system to a configuration dated BEFORE you did the update that has caused your problems. This method will get you working quickly, but it will not help you use Snow Leopard. If you have not already figured out how to do this "Restore," see:
http://support.apple.com/kb/HT1553
The section entitled " Using Disk Utility" will help you use your Time Machine backup to take your entire system back to when Leopard was working. After it works again, either stay with Leopard, or uninstall or update whatever software is causing your Snow Leopard conflict before again updating to Snow Leopard.
My questions - with what System CD i should start to make the clean install ? 10.5 or 10.6 ?
Use Leopard Install CD if you want to backup to Leopard.
Only use Snow Leopard if you want to try a fresh install of SL to see if you can get it working.
And How ?
Depending on your needs and whether you bought your Mac and SL update locally, and especially if your time is valuable to you, the best way may be to contact your retailer for an appointment so he can either help you or fix your problem for you. If you can use this as a training exercise, you will find it easier to do than to read and write about, and you can ask questions during the process. If you retailer does not consider proper installation of the SL software you bought from him to be part of his service, and if he offers "One to One", you may find it well worth your time and its cost:
http://www.apple.com/retail/onetoone/
If you have plenty of time, or if you merely like doing things for yourself, follow the instructions for the Disk you are using (or the instructions in the links I cite above if you want to try one of those methods.) Remember, you can try an easy/quick way first in case it works without all the manual effort on your part. If that fails to correct your problem, you are only out your time. You can try the next easiest way, and keep trying increasingly complex methods until you find the one that works for you.
What Data will be lost - or is all backup with Time Machine like Photos ,......
This answer varies depending on which method you use to restore your system or reinstall your OS:
• NOTHING IS LOST when you Archive & Install
(if you "preserve user and network settings" before installing)
• EVERYTHING IS LOST when you secure erase.
• Other methods may keep data but lose application or user configuration settings.
(1) I use SL on two Macs and it work GREAT on both. I WANT to use SL because I like it MUCH better than Leopard.&ensp:You did not ask this, but here is how I would proceed to get SL working:
♦ Unless you already have it, I would make another, separate, backup of all important data in addition to the one you already have in Time Machine. One backup is not enough for me. In addition to your music, photos, and other data files, consider items like those listed here:
http://support.apple.com/kb/HT2980
♦ THEN, I would securely erase the startup disk and follow the instructions that came with the SL DVD to install SL.
♦ Immediately after the restart that completes the install, I would use Mac's Disk Utility to repair permissions.
♦ Then configure your internet connection, and download and install the Mac OS X v10.6.2 Update (Combo):
http://support.apple.com/kb/DL959
♦ Immediately after the restart that completes the Combo Update, repair permissions again.
♦ Once you have reinstalled SL, use  > Software Update... to update any other Apple software as needed. I repair permissions before and after any installer than asks me to enter my Administrator Password.
♦ Now you can test your iMac using http://support.apple.com/kb/HT2090 to verify that the problem is resolved. If your problem persists at this point, see your Apple Authorized Service Provider for professional help.
♦ You can restore your data files either now or after reinstalling third-party items.
♦ Now, you can reinstall necessary third-party software. Install only one item at a time and test thoroughly before adding another so you can tell if one of them is causing a problem.
(2) If you would rather retreat to Leopard and not bother trying to fix SL on your Mac, the easiest fix will be to restore your Leopard system from Time Machine. You can then restore any data newer than your last working Leopard system from your backups.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

My mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

my mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Why when using keynote on my i-pad do I have no sound through the i-pad speakers and only sound when I plug in external speakers or headphones?

Why do I get no sound through the i-pad speakerts when using Keynotes but when external speakers or headphones are plugged in sound is there. Also how do you get back to the program page when in play mode on i-pad?

Whoa, I found the answer by clicking on one of the questions in the "More Like This" box to the right. I do wonder how to find that box before posting my dumb question. The answer turned out to be checking the youtube volume control. I turned that up and it solved the problem for Comast as well.

I have just upgraded to Yosemite and now Photoshop Elements freezes when using spot healing or clone stamp, is there an update due?

I have just updated to OSX10.10 Yosemite and now Elements freezes when using spot healing or clone stamp.

If you are using track pad, please use mouse and see if your issue is resolved.
Moreover, this issue has been resolved in PSE 13. You can give it atry as well.
Thanks!!

Mac Mail Freezes When I try to Delete Trash

Mac Mail Freezes when I try to delete trash. Spinning wheel of death goes for 10 - 15 minutes and freezes the entire computer. Please Help!

BDAqua -& Thoma_r - I did a safe boot, did repair permissions. 2 of the "Permission Differs" messages:
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Permissions differ on "Library/Application Support/ProApps/Internal Plug-Ins/BrowserKit/iLife.bkplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x . and around 30 more... Nothing about MacMail that I could tell.
There are 8 messages:
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be 80, group is 0.
Went into Console and was very confused as the dates start 2000 and ends at 2010 and nothing I could decipher as MacMail.
Is this MacMail?
2/17/10 9:03:08 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
2/17/10 9:03:08 AM com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy) Unknown key for boolean: EnableTransactions
2/17/10 9:03:08 AM com.apple.launchd[1] (com.apple.usbmuxd) Unknown key for boolean: EnableTransactions
2/17/10 9:03:08 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
2/17/10 9:03:08 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
2/17/10 9:03:08 AM com.apple.launchd[1] (org.x.privileged_startx) Unknown key for boolean: EnableTransactions
2/17/10 9:03:35 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[77]) Exited: Terminated
2/17/10 9:03:35 AM com.apple.launchd[63] (com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions
2/17/10 9:03:35 AM com.apple.launchd[63] (org.x.startx) Unknown key for boolean: EnableTransactions
2/17/10 9:03:39 AM com.apple.launchd[63] ([email protected][83]) Exited with exit code: 1
2/17/10 9:05:19 AM [0x0-0x11011].com.apple.Safari[109] Debugger() was called!
Thank you for your help

Test runner freezing when used with Dynamics CRM (and other apps) - Both applications freeze and never come back...

We are trying to use test runner with dynamics CRM.
MS Dynamics CRM will freeze and will not respond (even after 10 - 15 minutes). When this happens, the test manager will either freeze or a message will apear saying "waiting for application under test".
We are not recording action recordings...This makes using test manager impossible. It happens consistently, starting with slowing the PC down (mouse moving slowly, slow to load in new screens, drop downs etc) eventually leading to the app freezing.
Tried on windows xp, windows 7 etc on various specs of pcs.

I am experiencing this same issue with
Test runner freezing when used with Dynamics CRM. I notice this was first posted in June of 2010 and so far no
resolution? I was wondering if it could be related to memory issues? Do you have any troubleshooting ideas? The
issue for me seems to be sporadic and I can't
reproduce it every time.
The message I get is "waiting on application under test".
DLM

Crash or freeze when using Spot Removal

I am having problem with my lightroom 4.2, when I try to use the clone tool my computer crash or keep not responding can anyone help to understand what may be happening ?
Message title was edited by: Brett N

yes it is Windows 7
Date: Sat, 27 Oct 2012 14:46:54 -0600
From: [email protected]
To: [email protected]
Subject: Crash or freeze when using Spot Removal
    Re: Crash or freeze when using Spot Removal
    created by Geoff the kiwi in Photoshop Lightroom - View the full discussion
Is that Windows 7.You can look in the Help Menu in the Menu bar for Lightroom and under System Info you will find what is being asked for.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4805402#4805402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4805402#4805402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4805402#4805402. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why does my mac sometimes freeze when waking up?

Why does my mac sometimes freeze when waking up? It only happens sometimes, but also happens spontaneously. 21' iMac 2011 model. It just started recenlty after a new firmware update from apple. Any advice or reasons why would be appreciated.

boot to lion recovery and run verify/repair on the hard drive. verify will say: appears to be okay OR needs to be repaired. No matter what outcome, you will repair anyways (as it will do some updating on the volume)
Process: hold command R during startup/ wait till you see mac os utility (might have to select english as the main language first) then disk utility/ select macintosh HD on the left, and then verify/repair on the right bottom side. Cheers!

My Mac is freezing when using Keynote 6.2.2

Similar Messages

Maybe you are looking for