My mac is opening up my "gotomypc" remote window multiple times like 1,000 tabs , my mac is opening up my "gotomypc" remote window multiple times like 1,000 tabs
I was trying to open my remote "Gotomypc.com" and for what ever reason my computer kept opening the program up multiple times until it had over a thousand tabs that kept opening in firefox?
Hi sgtpepperlhcb2! Duplicate MAC and IP addresses in the DHCP list can be an indication of a possible firmware problem. I suggest you upgrade the router's firmware. Reset and reconfigure the router if the firmware upgrade will not work.
Here's an article that may help.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d2d5c9da8e68439883b85a9cf72bf7e5_How_to_upgrade_th...
Similar Messages
-
i have a problem with my Macbook Pro. When i tried to open it, something appeared : "enter your system lock PIN code to unlock this Mac". What should i do?
Question is did you lock your Mac from Find my iPhone using iCloud or is the Macbook really yours?
If you have in fact locked your Mac using Find my iPhone on iCloud then you will need to enter the PIN you have set when you locked the Mac.
*If you have not iniate the remote Lock then someone else has used your Apple ID and Password to lock your mac.
Message was edited by: Ammadz -
On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon
How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US -
My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open. It said that the licensing had expired. But this is not the case. Now what?
uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then properly install (do not migrate, use timemachine etc) using the installation files.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I just downloaded the new Mavericks operating sytem on my mid 2010 MacBook Pro, 17" 2.53GHz, Intel Core I5 machine. My IPhoto is no longer working at all, I'm getting an error message that says - "You Can't open the application "IPhoto" because it is not supported on this type of Mac". I also loaded Mavericks onto my other MacBook Pro 17", mid 2009 model and everything works fine. I would think that the newer Mac would easily work with IPhoto. Also, when I try to download from the App Store, it asks for my Apple ID and Password, I enter it, and then the little spinning color wheel just spins forever, with nothing ever happening. I tried downloading the IPhoto Upgrade but it never actually downloads, HELP!!!
What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT -
Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana
Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium -
I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?
You need to install Office on the computer from the installer DVD or disc image you purchased.
-
I have a photo cd from photographer that was burned on a mac but it will not open on my mac. It goes in, makes some noise, then ejects. My system pref. is set to open iPhoto when a photo cd is inserted. She has sent me 2 disc and both do the same thing. Any ideas?
NOt an iPhoto issue - either a bad CD or a bad Superdrive on your computer - no way for us to tell try the CD in a different computer
LN -
Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem. -
I proof websites for a living and workflow is everything. On my 26" main monitor I have FF running the job tracking web site. In this site, there are links to the sites I need to proof. I would like to be able to right click on a URL and select 'open in new window' and have that window open up on my second monitor.
Here's some more info about the router settings:
iOS: Recommended settings for Wi-Fi routers and access points
You should be able to get into the setup of your router by typing the IP address into your browser.
Depending on your router security setup, you might need the MAC address of your iPad, to allow access to your network, if the so called MAC filtering is active.
You can also check the name of your home network if your click on the AirPort icon on your desktop of your MacBook.
And here's a Wi-Fi assistant to get you going: http://www.apple.com/support/ipad/assistant/wifi/
Message was edited by: Ingo2711 -
The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
You can't open Dictation & Speech preferences because it doesn't work on an Intel-based Mac.
I cannot open or use Dictation & Speech in System Preferences. When I try to open it I get the error:
"You can’t open Dictation & Speech preferences because it doesn’t work on an Intel-based Mac."
I have tried repairing the disk from the installation CD and repairing the permissions and I have also tried re-installing Mountain Lion but the feature still does not work. Any ideas?Open Finder, press Option key and select Go > Library. Open Preferences and delete com.apple.systempreferences.plist. If you can't open, do a backup, format and install
-
i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX
Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now? -
I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?
Hello Fiona,
Congratulations on your new iPhone! You can sync information to your iPhone from your MacBook Pro using the Info tab in iTunes when your iPhone is connected. Use the steps in the following article:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Ive recently updated my mac to OS X 10.10 and now my CS5 illustrator and photoshop will not open... I uploaded the most recent Java and they still won't open. Please help
Mac,
Nothing shows up here?
https://www.adobe.com/account/my-products-services.html#
With CS5 you must have registered, hopefully under your present Adobe ID.
I am afraid the chat and phone support are off until the beginning of January.
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html
Adobe ID and registration support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-c1.html
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html -
Cannot open camera RAW images from Sony DSC-RX100M3 camera. Working on a Mac with Photoshop CS5 and Camera Raw 6.7?
Bruce,
When I made the transition to digital some 8 years ago, I had tremendous help from a number of well documented websites, among which:
http://www.luminous-landscape.com
I think a lot of stuff there to get you seriously going. Another one is:
http://www.computer-darkroom.com
I sold all my film based stuff, except a Nikon F3 and a handful of lenses and a Paterson developing tank.
The Nikon suspiciously smells like foam mirror damping strips chemically decaying.
I sold my enlarger over the internet. The word "enlarger" caused me to be on SpamCops blacklist for a while.
I'm in this since the seventies, and I think you'll be as amazed as I was at the possibilities and control you have. And no more bags with $300 worth of film that's consumed in one shoot.
Jump in both feet! you won't be sorry. And these forums are the best help you can get.
Good luck,
Rob
Maybe you are looking for
-
How to make Excel 2010 save a HTML report as a file without a folder created
We have a HTML report generated by Oracle Report with headers as below: <html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:x="urn:schemas-microsoft-com:office:excel" xmlns="http://www.w3.org/TR/REC-h
-
OneToMany Mapping Exception - can anybody help
SEVERE: >>java.lang.ExceptionInInitializerError: null javax.persistence.PersistenceException: Exception [TOPLINK-28018] (Oracle TopLink Essentials - 2.0 (Build b40-rc (03/21/2007))): oracle.toplink.essentials.exceptions.EntityManagerSetupExceptionExc
-
APO Demand Planning - Navigational Attributes BADI
Hi, I have an issue in that I need a Navigational Attribute to be able to store the GUID for a Forecast Profile to a Selection. In standard, only a selection with Key Characteristics can do this. It is not practical for us to use a Key Characteristic
-
I am using MATMAS idoc to trigger any changes on the material when the document is saved. But how i find out the idoc number from the MM02 if that possible. Also if the idoc does not exist in WE02 or WE05 transactions where do you think issue then??
-
FrameMaker 12: neu eingegeben Worttrennungen werden ignoriert, obwohl die Worte in einem dokumentenspezifischen Wörterbuch richtig eingetragen wurden